Abstract:Removal and sequestration of CO2 from flue gas has been proposed as one of the most reliable solutions to mitigate globe greenhouse emissions. Adsorption technology based on porous adsorbent is known to be one of the most efficient processes for the CO2 capture from flue gas. The key issue of this technology is to find the adsorbent with high adsorption capacity and selectivity for CO2. In this chapter, both the experimental and the computer simulation works about the CO2 adsorption behavior on porous materials in our laboratory were introduced. In the experimental works, the mesoporous materials such as MCM-41 and SBA-15 were selected as the fundamental adsorbent. After surface modification by aminosilane, the amine groups became active centers and the CO2 adsorption capacity was obviously increased due to the chemisorption. It is shown that the dual amine groups of AEAPMDS had better effect on CO2 adsorption than the single amine group of APTS. The best CO2 adsorption capacity of MCM-41-AEAPMDS was 2.20 mmol.g(-1) at room temperature. Another effective way was incorporation metal Mg into the mesoporous materials. By various impregnating or doping methods, such as the co-condensation, the dispersion with the enhancement of Al3+ or amine, and the ionic exchange, a suitable amount of Mg2+ can be successfully introduced into MCM-41 and SBA-15, which effectively increased the CO2 adsorption capacity. Different pore structures had their corresponding optimized methods, the real reason behind was the highly dispersed MgO state in the channels. The best CO2 adsorption capacities of Mg-Al-SBA-15-D1 and Mg-EDA-MCM-41-D10 were about 1.35 mmol.g(-1). In the simulation works, some novel porous materials such as the micro/mesoporous composite, the covalent organic frameworks, the metal organic framework and the zeolitic imidazolate frameworks were selected as the potential adsorbents for the CO2 capture. The CO2 adsorption behavior of the zeoilte of MFI, the mesoporous MCM-41 and the micro/mesoporous composite of MFI/MCM-41 were simulated and compared. It is revealed that the micro/mesoporous composite had better performances on the CO2 adsorption capacity and selectivity at high pressure, as well as the diffusion performance.

Adsorption-Separation of CO2 /N2 by Modified 5A Molecular Sieve

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Study On the Adsorption Performance of Zeolite Molecular Sieve for CO2

Experimental And Computer Simulation Studies For The Adsorption Separation Of Co2 From Flue Gas By 5a-Mcm-41 Micro/Mesoporous Composite

Co2 Adsorption on Porous Materials: Experimental and Simulation Study

Tailoring the pore structure modified with functional groups for superior CO2 adsorption capacity and the selectivity of separation

Synthesis of cobalt-silicon molecular sieve with excellent CO2/N2 adsorption selectivity for dynamic CO2 capture

Investigation of highly efficient adsorbent based on Ni-MOF-74 in the separation of CO2 from natural gas

The Influence of Pore Size and Pore Structure of Silica-Based Material on the Amine-Modified Adsorbent for CO2 Capture

Adsorption,capture and Separation of CO2 by Carbon-Based Adsorbents

CO2 removal by zeolite molecular sieves

Preparation of ZSM-5 molecular sieve modified by kaolin and its CO2 adsorption performance investigation

Adsorption and Desorption Experimental Study of Carbon Dioxide/Methane Mixture Gas on 13X-Type Molecular Sieves

Regulating the Si/Al ratio of GIS zeolite with bulky primary particles for selective CO 2 capture from hydrocarbons

CO2 Capture by the Amine-modified Mesoporous Materials

Efficient Capture of CO2 over Ordered Micro-Mesoporous Hybrid Carbon Nanosphere

Adsorptive Removal of Carbon Dioxide Using Polyethyleneimine Supported on Propanesulfonic-Acid-Functionalized Mesoporous SBA-15

Adsorption of CO2, CH4 and N2 on ordered mesoporous silica molecular sieve

Zeolite@Mesoporous silica-supported-amine hybrids for the capture of CO 2 in the presence of water

Zeolite Apgiia for Adsorption Based Carbon Dioxide Capture