Abstract:In the process of promoting the commercialization of proton exchange membrane fuel cells, the long-term durability of the fuel cell has become a key consideration. While existing durability tests are critical for assessing cell performance, they are often time-consuming and do not quickly reflect the impact of actual operating conditions on the cell. In this study, improved testing protocols were utilized to solve this problem, which is designed to shorten the testing cycle and evaluate the degradation of the cell performance under real operating conditions more efficiently. Accelerated durability analysis for evaluating the MEA lifetime and performance decay process was carried out through two testing protocols—open circuit voltage (OCV)-based accelerated durability testing (ADT) and relative humidity (RH) cycling-based ADT. OCV-based ADT revealed that degradation owes to a combined mechanical and chemical process. RH cycling-based ADT shows that degradation comes from a mainly mechanical process. In situ fluoride release rate technology was employed to elucidate the degradation of the proton exchange membrane during the ADT. It was found that the proton exchange membrane suffered more serious damage under OCV-based ADT. The loss of F- after the durability test was up to 3.50 × 10−4 mol/L, which was 4.3 times that of the RH cycling-based ADT. In addition, the RH cycling-based ADT had a significant effect on the catalyst layer, and the electrochemically active surface area decreased by 48.6% at the end of the ADT. Moreover, it was observed that the agglomeration of the catalysts was more obvious than that of OCV-based ADT by transmission electron microscopy. It is worth noting that both testing protocols have no obvious influence on the gas diffusion layer, and the contact angle of gas diffusion layers does not change significantly. These findings contribute to understanding the degradation behavior of proton exchange membrane fuel cells under different working conditions, and also provide a scientific basis for developing more effective testing protocols.

Test on the Degradation of Direct Methanol Fuel Cell

Durability studies of unsupported Pt cathodic catalyst with working time of direct methanol fuel cells

Investigation on Cathode Degradation of Direct Methanol Fuel Cell

Investigation of the performance decay of anodic PtRu catalyst with working time of direct methanol fuel cells

Investigation on the Durability of Direct Dimethyl Ether Fuel Cell. Part I: Anode Degradation

Enhancing the life of direct methanol fuel cell

Investigation on the durability of direct dimethyl ether fuel cell. Part II: Cathode degradation

Studies of performance decay of Pt/C catalysts with working time of proton exchange membrane fuel cell

Durability Study of Double Catalytic Layer Anode for Direct Methanol Fuel Cell

Catalyst Microstructure Examination of PEMFC Membrane Electrode Assemblies vs. Time

Durability Studies on Performance Degradation of Pt/C Catalysts of Proton Exchange Membrane Fuel Cell

Understanding the Performance Degradation of Anion-Exchange Membrane Direct Ethanol Fuel Cells

Degradation Characteristics of Membrane Electrode Assembly under Drive Cycle Test Protocol

Performance Degradation of A Direct Borohydride Fuel Cell

Key Components Degradation in Proton Exchange Membrane Fuel Cells: Unraveling Mechanisms through Accelerated Durability Testing

Durability of Pt-Ru/C Catalyst in Direct Methanol Fuel Cells

A Polymer Electrolyte Fuel Cell Life Test Using Accelerating Degradation Technique

Diagnosis of Membrane Electrode Assembly Degradation with Drive Cycle Test Technique

Study of Complete Methanol Depletion in Direct Methanol Fuel Cells

Quantification and evolution on degradation mechanisms of proton exchange membrane fuel cell catalyst layer under dynamic testing conditions

Activity and degradation study of an Fe-N-C catalyst for ORR in Direct Methanol Fuel Cell (DMFC)