Abstract:A series of catalysts prepared by precipitation method were used to investigate the effects of preparation conditions on iron-based catalysts for high-temperature Fischer–Tropsch synthesis (HTFT) of light olefins. In this study, we varied the titration methods (forward precipitation, concurrent precipitation, and reverse precipitation), iron precursors [Fe(NO 3 ) 3 , Fe 2 (SO 4 ) 3 , and FeCl 3 ], precipitants (ammonium carbonate, sodium carbonate, ammonia solution, sodium hydroxide, and potassium hydroxide), precipitation pH values (pH = 6.0, 7.0, 8.0, and 9.0), precipitation temperature (temperature = 25 °C, 45 °C, 65 °C, 75 °C, and 85 °C) and incorporation manners of Mn promoter (precipitation and incipient wetness impregnation method). It was demonstrated that different preparation conditions affect the BET specific surface area, pore structure, the morphology and dispersion of the catalyst, grain size, reduction ability, and CO adsorption ability of the catalyst, which in turn affect the activity of the catalyst and the production of light olefins during the HTFT. The results showed that the iron-based catalysts with the optimum catalytic performance and production of light olefins were prepared under the following conditions: ammonium carbonate as the precipitant and ferric trichloride as the iron precursor by concurrent precipitation method at pH 8.0 and 65 °C, followed by the introduction of Mn promoter by precipitation method. Catalysts were characterized by Ar adsorption–desorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), H 2 temperature-programmed reduction (H 2 -TPR), and CO-temperature-programmed desorption (CO-TPD).

Effect of reaction conditions on the catalytic performance of Fe-Mn catalyst for Fischer-Tropsch synthesis

Impact of H2/CO Ratios on Phase and Performance of Mn-modified Fe-based Fischer Tropsch Synthesis Catalyst

Effect of Pressure, H2/CO Ratio and Reduction Conditions on Co-Mn/CNT Bimetallic Catalyst Performance in Fischer-Tropsch Reaction

Effect of Co-Feeding Carbon Dioxide on Fischer–Tropsch Synthesis over an Iron–manganese Catalyst in a Spinning Basket Reactor

Revisiting the Syngas Conversion to Olefins over Fe-Mn Bimetallic Catalysts: Insights from the Proximity Effects

Effects of Mn Promotion on the Structure and Catalytic Performance of Co2C-based catalysts for Fisher-Tropsch synthesis to Olefin

Effect of Reduction Parameters on the Structure of Fe-Mn Catalyst for Fischer-Tropsch Synthesis

Studies on performance of Fischer-Tropsch synthesis over Fe-Cu-K catalyst

Effect of copper on highly effective Fe-Mn based catalysts during production of light olefins via Fischer-Tropsch process with low CO2 emission

Activation Temperature Study of Precipitated Fe/Sio2 Catalyst for Fischer-Tropsch Synthesis

Effects of Sm on Fe–Mn Catalysts for Fischer–Tropsch Synthesis

Study of the Fischer-Tropsch synthesis on nano-precipitated iron-based catalysts with different particle sizes

Kinetics Study of Fischer-Tropsch Reaction to Lower Olefins over MnOx-promoted Fe/SiO2 Catalysts

Studies on perfomence of Fischer - Tropsch synthesis over Fe - Cu - K catalyst

Dynamics of Co/Co2C redox cycle and their catalytic consequences in Fischer–Tropsch synthesis on cobalt–manganese catalysts

The role of Manganese in CoMnOx Catalysts for Selective Fischer-Tropsch Synthesis

Effect of Preparation Conditions on Precipitated Iron-Based Catalysts for High-Temperature Fischer–Tropsch Synthesis of Light Olefins

Performance of Fe-Co bimetallic catalysts with different and low Co contents for Fischer-Tropsch synthesis

Study on the Precipitated Iron Catalysts for Fischer-Tropsch Synthesis

Carbon Nanotube-Supported Fe–Mn Nanoparticles: A Model Catalyst for Direct Conversion of Syngas to Lower Olefins

High-temperature Fischer–Tropsch Synthesis over the Li-promoted FeMnMgOx Catalysts