Abstract:The structure, reduction/carburization, and catalytic performance of K- and Cu-promoted Fe2O3 during initial contact with synthesis gas were examined by combining kinetic analysis of the initial stages of Fischer-Tropsch synthesis (FTS) with X-ray absorption spectroscopy. Oxygen removal initially occurs without FTS reactions as Fe2O3 is reduced to inactive oxygen-deficient Fe2O3 species. Hydrocarbon synthesis reactions become detectable only as Fe3O4 forms and rapidly converts to FeCx. FTS reactions require only the incipient conversion of the surface layers to a dynamic and active surface phase, which consists of FeCx with steady-state surface coverages of vacancies, formed via oxygen and carbon removal during the formation of monomers, CO2, and H2O. Such surfaces tend to respond to changes in the contacting gas phase within turnover times by changing the relative surface concentration of carbon, oxygen, CO, and hydrogen. The catalytic behavior of these dynamic surfaces is largely independent of the carbide or oxide nature of the particle cores. These findings, combined with the rapid formation and interconversion of Fe3O4 and FeCx within characteristic FTS turnover times, make the definite assignment of FTS activity to either phase neither appropriate nor kinetically rigorous. The presence of K and Cu increases FTS rates, and the steady-state extent of carburization by providing nucleation sites for the formation of smaller FeCx crystallites. These smaller active domains lead, in turn, to shorter diffusion paths and to a larger number of sites for CO adsorption/dissociation and for FTS reactions. These structural promotion effects of K and Cu were consistent with reaction rates, X-ray absorption spectra, and site density measured on promoted and unpromoted catalysts as a function of time in contact with synthesis gas.

Studies on perfomence of Fischer - Tropsch synthesis over Fe - Cu - K catalyst

Studies on performance of Fischer-Tropsch synthesis over Fe-Cu-K catalyst

Kinetics Modelling of Fischer–Tropsch Synthesis over an Industrial Fe–Cu–K Catalyst

Computational Study on Thermodynamic Properties of Fischer-Tropsch Synthesis Process

Fischer–Tropsch Synthesis: Effect of K Loading on the Water–Gas Shift Reaction and Liquid Hydrocarbon Formation Rate over Precipitated Iron Catalysts

Fischer-Tropsch Synthesis: A Long Term Comparative Study of the Product Selectivity and Paraffin to Olefin Ratios over an Iron-Based Catalyst Activated by Syngas or H2

Effect of Co-Feeding Carbon Dioxide on Fischer–Tropsch Synthesis over an Iron–manganese Catalyst in a Spinning Basket Reactor

Effect of reaction conditions on the catalytic performance of Fe-Mn catalyst for Fischer-Tropsch synthesis

Fischer–Tropsch Synthesis: Influence of CO Conversion on Selectivities, H 2 /CO Usage Ratios, and Catalyst Stability for a Ru Promoted Co/Al 2 O 3 Catalyst Using a Slurry Phase Reactor

Kinetics of the Fischer-tropsch Reaction over a Ru Promoted Co/al2o3 Catalyst

Studies of the Fischer-Tropsch Synthesis over Co/ZrO_2/SiO_2 Catalyst

Synthesis of stable and low-CO 2 selective ε-iron carbide Fischer-Tropsch catalysts.

Spectroscopic and Transient Kinetic Studies of Site Requirements in Iron-Catalyzed Fischer−Tropsch Synthesis

Fischer–Tropsch Synthesis: Influence of CO Conversion on Selectivities, H<sub>2</sub>/CO Usage Ratios, and Catalyst Stability for a Ru Promoted Co/Al<sub>2</sub>O<sub>3</sub> Catalyst Using a Slurry Phase Reactor

Fischer-Tropsch Synthesis: Effect of CO Conversion on CH4 and Oxygenate Selectivities over Precipitated Fe-K Catalysts

Impact of H2/CO Ratios on Phase and Performance of Mn-modified Fe-based Fischer Tropsch Synthesis Catalyst

Nanostructured Catalyst for Fischer-Tropsch Synthesis: Nanostructured Catalyst for Fischer-Tropsch Synthesis

Studies on MCM-48 Supported Cobalt Catalyst for Fischer–Tropsch Synthesis

Study on Catalytic Performance and Attrition Strength of the Ruhrchemie Catalyst for the Fischer-Tropsch Synthesis in A Stirred Tank Slurry Reactor

Product distributions and olefin-to-paraffin ratio over an iron-based catalyst for Fischer–Tropsch synthesis

Performance of Co/AC Catalyst in Synthesizing Liquid-Fuel