Abstract:Fischer-Tropsch synthesis (FTS) is a classical topic of great significance because of the approach of post-petroleum times. Recently we found that, taking the advantage of the anchoring effect and intrinsic basicity of nitrogen-doped carbon nanotubes (NCNTs), iron nanoparticles could be conveniently immobilized on the NCNTs without surface pre-modification. The so-constructed Fe/NCNTs catalyst presents the superb catalytic performance in FTS with high selectivity as well as high catalytic activity and stability. In this study, three Fe/NCNTs catalysts were prepared by incipient wetness impregnation method, colloidal method and deposition-precipitation method, denoted as Fe/NCNTs-IWP, Fe/NCNTs-C, and Fe/NCNTs-DP, respectively. The influence of preparation methods on the particle size distribution and morphology, reduction and carbonization of the active species, as well as the FTS catalytic performance were systematically examined. The results indicate that the incipient impregnation method could achieve high dispersion, smaller particles and narrower size distribution [(8 +/- 4) nm], leading to the easier reduction and carbonization of the iron nanoparticles compared with those prepared by the other two methods. The FTS catalytic performance of the Fe/NCNTs-IWP catalyst is much better than those of the Fe/NCNTs-C and the Fe/NCNTs-DP catalysts in terms of the high lower olefins selectivity, high catalytic activity and stability. Colloid method got the different morphologies of iron particles with the average size of (13 +/- 7) nm. The active iron species was susceptible to oxidation during the reaction, which cause poor catalytic activity and stability. The deposition-precipitation method got the largest particles of (19 +/- 11) nm which were difficult to be reduced and carbonized, leading to the sharp decline of the catalytic activity and stability after 15 h reaction. The size-dependence of the catalytic performance for the Fe/NCNTs catalysts in this study are generally in consistent with those in literatures for the iron catalysts supported on carbon nanotubes. These results should be suggestive for exploring the advanced FTS catalysts with the abundant N-doped carbon nanostructures.

Study on the Precipitated Iron Catalysts for Fischer-Tropsch Synthesis

The Effect of Hydrophobically Modified Iron Catalysts with Hexadecyltrimethoxysilane on Fischer‐Tropsch Synthesis

Study of Iron-Based Catalysts Performance in Fischer–Tropsch Synthesis: Temperature and Promoter Effect

Effect of Iron Precursor on Catalytic Performance of Precipitated Iron Catalyst for Fischer–Tropsch Synthesis Reaction

Comparison of Preparation Methods of Iron-Based Catalysts for Enhancing Fischer-Tropsch Synthesis Performance

Effect of Preparation Conditions on Precipitated Iron-Based Catalysts for High-Temperature Fischer–Tropsch Synthesis of Light Olefins

Development of an Iron-Based Fischer—Tropsch Catalyst with High Attrition Resistance and Stability for Industrial Application

Γ-Fe2o3 As the Precursor of Iron Based Catalyst Prepared by Solid-State Reaction at Room Temperature for Fischer-Tropsch to Olefins

Nanocrystalline Ferrihydrite-Based Catalysts for Fischer-Tropsch Synthesis: Part I. Reduction and Carburization Behavior

Synthesis of Iron-Carbide Nanoparticles: Identification of the Active Phase and Mechanism of Fe-Based Fischer–Tropsch Synthesis

Influence of Preparation Methods on Catalytic Performance of Fe/Ncnts Fischer-Tropsch Catalysts

Spectroscopic and Transient Kinetic Studies of Site Requirements in Iron-Catalyzed Fischer−Tropsch Synthesis

Nanostructured Catalyst for Fischer-Tropsch Synthesis: Nanostructured Catalyst for Fischer-Tropsch Synthesis

Plasma Assisted Preparation of CoPt/SiO2 Fischer‐Tropsch Catalysts: A Comparison of the Precursor Pre‐Thermal Treated Temperatures

Xps Study of Iron Catalysts for Fischer-Tropsch Synthesis

Stabilizing the Active Phase of Iron-Based Fischer–Tropsch Catalysts for Lower Olefins: Mechanism and Strategy

Effects of Potassium Loading over Iron–Silica Interaction, Phase Evolution and Catalytic Behavior of Precipitated Iron-Based Catalysts for Fischer-Tropsch Synthesis

Preparation of Graphene-Supported Fe3O4 Model Catalysts for Fischer-Tropsch Synthesis

A DFT study towards dynamic structures of iron and iron carbide and their effects on the activity of the Fischer–Tropsch process

Supported Fe2C catalysts originated from Fe2N phase and active for Fischer-Tropsch synthesis

Stabilization of ε-iron carbide as high-temperature catalyst under realistic Fischer-Tropsch synthesis conditions