Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

Fabrication of Y-branch Planar Lightwave Circuit Optical Splitter

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

Broadband and High Uniformity Y Junction Optical Beam Splitter with Multimode Tapered Branch

Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

Fabrication and Characterization Glass-Based Integrated Optical Power Splitter

Design and Fabrication of Polymer-Based 1 × 4 Y-branch Splitters

Design and Optimization of Non-Uniform 1 × 5 PLC Splitter Using Orthogonal Experimental Method

Study and fabrication of multimode interference GaAs optical power splitter

Design and manufacturing of glass-based optical splitter with compact layout

Glass-based integrated optical splitters: Engineering oriented research

Compact and economical MMI optical power splitter for optical communication

Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication

93-THz ultra-broadband and ultra-low loss Y-junction photonic power splitter with phased inverse design.

Low Loss 1 × 16/40 Flat Type Beam Splitters on Thin Film Lithium Niobate Using Photolithography Assisted Chemo‐Mechanical Etching

Design and Fabrication of Polymer-Based Multimode Interference Optical Splitters

Compact Double-Layer Subwavelength Binary Blazed Grating 1×4 Splitter Based on Silicon-on-insulator

Non-Volatile Tunable Optical Power Splitter Based on the Hybrid Integration of the Planar Lightwave Circuits and the Phase Change Material

High Efficient Coupling Between Wedged-Slaped Fiber And Planar Lightwave Circuit Chip Using Gradient Refractive-Index Media

A flattop PLC polymer waveguide interleaver based on folded two-stage-cascaded Y-junction Mach–Zehnder interferometers

Ultracompact wavelength and polarization splitters in periodic dielectric waveguides.

Type-Ⅰ waveguide and Y-branch splitter fabricated by femtosecond laser direct writing in X-cut LiNO3 crystal