Abstract:Flexible rolling is important for increasing rolling production capacity. Since the wear rolls withdrawn and new rolls launched into the rolling process causing thermal deformation parameters variation, such as deformation temperature, strain rate, and strain. This paper studies the coupling behavior of static recrystallization (SRX), metadynamic recrystallization (MDRX), and thermal deformation parameters based on the double-pass thermal simulation experiments, analyzes the flow stress curves and reveals the variation law of recrystallization with thermal deformation parameters. The result shows that the second-pass flow stress of SRX is significantly dependent on the inter-pass time, deformation temperature and strain rate, Compared to MDRX, SRX requires time to nucleus of conception and is more influenced by initial strain. Considering the recovery effect and the multi-pass static softening solution algorithm of materials, the kinetic models of SRX and MDRX are established, and the predicted values of the models are in good agreement with the experimental values. The EBSD microstructure characterization technique is used to characterize the morphology of SRX and MDRX. The result shows that increasing inter-pass time, deformation temperature and strain rate can promote the SRX and MDRX process and improve static softening effect. Under the condition of constant deformation temperature and strain rate, increasing the initial strain can increase the SRX volume fraction. However, deformation temperature and strain rate have a more significant effect on the static softening than the initial strain. This paper provides a theoretical basis for designing and optimizing recrystallization behavior of flexible rolling gaps.

Prediction of Rolling Load, Recrystallization Kinetics, and Microstructure During Hot Strip Rolling

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Recrystallization and grain growth in hot rolling

The Coupling Machine Learning for Microstructural Evolution and Rolling Force During Hot Strip Rolling of Steels

Machine Learning Complex Interactions among Recovery, Precipitation, and Recrystallization for Nb Micro-Alloyed Steels

Modeling of Dynamic Recrystallization and Flow Stress of Nb‐Bearing Steels

Numerical analysis of flow behaviour, grain size prediction and experimental verification of hot rolled ultralow carbon niobium microalloyed steel

Modelling of Microstructure Evolution During Hot Rolling of a High-Nb HSLA Steel

Modeling of the Microstructural Evolution and Mean Flow Stress during Thin Slab Casting/Direct Rolling of Niobium Microalloyed Steels

Study on dynamic recrystallization of ultra-high strength 22MnB5 steel during hot rolling

Numerical simulation on recrystallization behavior and microstructure evolution during hot continuous rolling process of 38CrMoAl steel rod

Recrystallization Behavior and Mechanical Properties of Az31b Alloy During the Hot-Rolling Process

Multi-Scale Modeling of Microstructure Evolution during Multi-Pass Hot-Rolling and Cooling Process

Machine Learning Hot Deformation Behavior of Nb Micro-alloyed Steels and Its Extrapolation to Dynamic Recrystallization Kinetics

The Prediction of the Mechanical Properties for Hot-Rolled Nb Micro-Alloyed Dual-Phase Steel Based on Microstructure Characteristics

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

Interaction of Strain Refined Precipitates and Recrystallized Grains in Nb-Ti Microalloyed Steel during Continuous Casting, Hot-Core Heavy Reduction Rolling, and Reheating Process

Dynamic Recrystallization Behavior of Low‐Carbon Steel during the Flexible Rolling Process: Modeling and Characterization

Static softening behavior of 316L stainless steel under flexible rolling process

Numerical Prediction of Microstructure Evolution of Small-Diameter Stainless Steel Balls during Cold Skew Rolling

Effect of Nb-Ti Microalloyed Steel Precipitation Behavior on Hot Rolling Strip Shape and FEM Simulation