Abstract:Recently, energy conservation, environmental protection and security are the main factors considered by the automotive manufacturers. Medium-Mn steel with excellent combination of specific strength and ductility have been regarded as the potential candidates for automotive applications. The excellent combination of specific strength and ductility depends on the microstructure under different heat treatment processes of the steels. Therefore, the relationship of the combination of specific strength and ductility and microstructure should be studied in detail. Anew alloy system of aluminum-containing medium-Mn steel was developed in this study. The addition of aluminum stabilizes alpha-ferrite, and facilitates the presence of 6-ferrite during solidification. The addition of Mn and C compensates the effect of aluminum on phase stability and ensures austenite formation. In this investigation, the effects of intercritical annealing temperature on the microstructure and tensile properties of a newly designed cold-rolled aluminum-containing medium-Mn steel (0.2C-5Mn- 0.6Si- 3Al, mass fraction, %) were investigated by SEM, XRD and uniaxial tensile tests. The tensile results show that an excellent combination of ultimate tensile strength (sigma(b)) of 1062 MPa, total elongation (delta) of 58.2% and sigma(b) x delta of 61.8.% could be obtained after annealing at 730 degrees C. The inverted austenite of the cold-rolled steel coarsenes and gradually changes its morphology from mainly lamellar to mainly equiaxed with increasing intercritical annealing temperature, and a duplex microstructure consisting of multi-scale retained austenite could be obtained at 730 degrees C, which possesses suitable mechanical stability and thus presents prolonged transformation-induced plasticity (TRIP) effect during tensile deformation. This kind of sustainable TRIP effect and the cooperative deformation of ferrite are responsible for the superior mechanical properties. The investigation of tensile fracture behavior shows that the nucleation and growth of voids occurred mainly at the interfaces between soft ferrite and hard martensite induced by deformation.

The Prediction of the Mechanical Properties for Hot-Rolled Nb Micro-Alloyed Dual-Phase Steel Based on Microstructure Characteristics

Microstructures and Mechanical Properties of Hot-Rolled Nb-Microalloyed Trip Steels by Different Thermo-Mechanical Processes

Design and characterization for advanced high strength nb-containing dual-phase steels

Mathematical Models for Predicting Microstructural Evolution and Mechanical Properties of Low Carbon Steel During Controlled Rolling and Controlled Cooling

Modeling the Effect of Laminar Cooling Pattern on Microstructure and Mechanical Properties of Plates in Rolling Process

Mechanism and control of nonuniform phase transformation of microalloyed dual-phase steel during cooling process after hot rolling

Strain-hardening prediction of dp600 steel considering the heterogeneous deformation between ferrite and martensite

Prediction for Microstructure and Mechanical Properties of Hot Rolled High Carbon Steel Wire

Process Design and Prediction of Mechanical Properties of Dual Phase Steels with Prepositional Ultra Fast Cooling

Application of Mathematical Model for Microstructure and Mechanical Property of Hot Rolled Wire Rods

Prediction on the Mechanical and Forming Behavior of DP590 Steel Based on a Flow Model

Microstructure and Mechanical Properties Research of Low Cost Hot Rolled Dual Phase Steel

Microstructure and Mechanical Properties of a Novel Cold Rolled Medium-Mn Steel with Superior Strength and Ductility

Integrated Modelling of Microstructure Evolution and Mechanical Properties Prediction for Q&P Hot Stamping Process of Ultra-High Strength Steel

Dependence of mechanical properties on the phase composition of intercritically annealed medium-Mn steel as the main competitor of high-strength DP steels

Development of Intelligent Methodologies Perceiving Microstructure and Mechanical Properties of Hot Rolled Steels

The effect of the increased strain per pass during the hot-rolling and its effect on the tensile properties of V-Mo and Cr-V-Mo microalloyed dual-phase steels

The Coupling Machine Learning for Microstructural Evolution and Rolling Force During Hot Strip Rolling of Steels

Prediction and Control of Equiaxed Α in Near-Β Forging of TA15 Ti-alloy Based on BP Neural Network: for Purpose of Tri-Modal Microstructure

Microstructure Evolution in Nb-Ti Micro-Alloyed Steel During Hot Compression and Hot Rolling Simulation

Machine Learning Hot Deformation Behavior of Nb Micro-alloyed Steels and Its Extrapolation to Dynamic Recrystallization Kinetics