Abstract:Reasonable control of the distribution and development of gas flow is one of the most important operations for blast furnace (BF) ironmaking process. The BF throat temperature directly reflects internal coal gas flow distribution. Therefore, BF throat temperature monitoring is the key prerequisite for BF abnormal monitoring. In this paper, a novel fault diagnosis method for BF cross temperature measurement device is proposed, based on a residual analysis method combining principal component analysis (PCA) and furnace throat temperature estimation via multi-burden layer reconstruction. Firstly, the material surface profile of each BF burden layer is calculated according to the burden material distributing movement process, the material layer distribution model is established in combination with particle descending process, and the multi-burden layer reconstruction is implemented. Then, using the multilayer ore coke ratio (OCR) distribution concluded from the reconstructed multi-burden layers and the main BF state parameters, the long short-term memory (LSTM) network is adopted to estimate the furnace throat temperature. The residual difference between the estimated result and the actual temperature value is calculated. Finally, residual difference and BF main parameters are used as inputs of PCA to obtain fault diagnosis results, and the majority voting (MV) method is introduced to improve the stability and accuracy of the results. A case study is conducted using data from a BF located in the south of China to verify the effectiveness of the method. The fault diagnosis accuracy is above 90% when the offset is greater than 9°C or the drift rate is greater than 0.4 %

Study on Modeling of Furnace Temperature Soft Measurement of Fire Simulated Experiment

Study on Billet Temperature Prediction and Furnace Temperature Optimal Setting of Regenerative Reheating Furnace

Integrated modeling of bed temperature for a circulating fluidized bed incinerator

Soft measurement of heating value of burning municipal solid waste forcirculating fluidized bed

Measurements of Quality Variables for an Industrial Rolling Mill Reheating Furnace (II)

Application Of Deviation Parameter Fuzzy Fusion Method In Furnace

A Novel Method Based on Information Fusion for Modeling Burden Surface Temperature Field in Blast Furnace

Fault Diagnosis of Blast Furnace Throat Temperature Monitoring Device Based on Residual Analysis

A Novel Fuzzy Fusion Method Based Deviation and Its Application on Furnace

Soft-sensor modeling via neural network PLS approach

Soft Sensor and Internal Model Control of Heating Furnace Thermal Efficiency

Simulation of temperature field of sintering ignition furnace

STUDY ON PREDICTION MODEL FOR TEMPERATURE OF FLUE GAS EXHAUSTED FROM UTILITY BOILERS BASED ON PROPERTIES OF FUEL COAL

Advanced Soft-Sensing Techniques for Predicting Furnace Temperature in Industrial Organic Waste Gasification

Modified reconstruction of boiler numerical temperature field based on flame image feature extraction

Soft Sensor for Blast Furnace Temperature Field Based on Digital Twin

Calibration Furnace Temperature Control System Based on RBF Neural Network

ON-LINE MONITOR FOR CROSS-SECTION TEMPERATURE-FIELD CENTER OF 300MWE FURNACE

RESEARCH ON RECONSTRUCTION OF TEMPERATURE FIELD IN FURNACE AND NONLINEAR OPTIMIZATION METHOD

STUDY ON TEMPERATURE MEASUREMENT IN COPPER REFINING FURNACE

Research on Reconstruction Method of Intersection Temperature Distribution of Furnace Flame Based on Radiation Image