Abstract:Computational fluid dynamics (CFD) method is a common method to obtain the temperature field distribution within the furnace. However, in order to reduce computational complexity, the numerical simulation involve simplifications in boundary conditions and model parameters. As a result, the temperature field distribution deviates from the actual operating conditions. This paper proposes a numerical temperature field modification method based on flame images. Flame images corresponding to the operational conditions are collected using the Industrial Flame Monitoring System (IFMS). The flame images are preprocessed, and the contour of the flame's core region is extracted using the Mask Region-based Convolutional Neural Network (Mask R-CNN) method. The geometric features of the flame are extracted, and matrix calculations are applied to modify the numerical temperature field. The modified temperature field exhibits a deviation in the combustion center, aligning with the actual operation of the boiler. A comparison between the modified temperature field and the temperature measurements from flue gas shows consistent temperature trends. The absolute error (AE) under different operating conditions is under 8.8 K, and the relative error (RE) remains below 1.3%. The analysis results demonstrate that it can enhance the accuracy of temperature field calculations by the modification from flame image features.

Research on Reconstruction Method of Intersection Temperature Distribution of Furnace Flame Based on Radiation Image

Research on Temperature Distribution of Combustion Flames Based on High Dynamic Range Imaging

RESEARCH ON RECONSTRUCTION OF TEMPERATURE FIELD IN FURNACE AND NONLINEAR OPTIMIZATION METHOD

Study of an Improved Two-Colour Method Integrated with the Emissivity Ratio Model and Its Application to Air- and Oxy-Fuel Flames in Industrial Furnaces

The Measurement of Intersection Temperature Distribution of Coal Burning Flame Using Algebra Reconstruction Technique (ATR) Based on Radiation Image

Theoretical Fast Non-Intrusive 3-D Temperature Distribution Measurement Within Scattering Medium from Flame Emission Image Analysis

Experimental Reconstructions of Flame Temperature Distributions in Laboratory-Scale and Large-Scale Pulverized-Coal Fired Furnaces by Inverse Radiation Analysis

STUDY ON SECTION TEMPERATURE MEASUREMENT OF POWER PLANT BOILER BASED ON FLAME IMAGE

Simulation Study on Radiative Imaging of Combustion Flame in Furnace

Three-Dimensional Temperature Field Reconstruction from Flame Images Using Algebraic Reconstruction Technique

Modified reconstruction of boiler numerical temperature field based on flame image feature extraction

Image based temperature field reconstruction for combustion flame

Research on algorithm of reconstruction of 3-D temperature distribution in non-symmetric luminous flame

Model and Experiment for Three-Dimensional Temperature Measurement Based on Flame Image

Flame Image Based Temperature Distribution Reconstruction of a Rotary Kiln Hazardous Waste Incinerator

Reconstructing Temperature and Particle Concentration Distribution Based on Flame Image

Simulation Study on Reconstruction Model of Three-Dimensional Temperature Distribution Within Visible Range in Furnace

Research on temperature field reconstruction technology for single-dome combustion chambers based on flame image

Simulation of temperature field of sintering ignition furnace

Temperature and soot volume fraction distributions reconstruction for swirling flame

RESEARCH ON TEMPERATURE FIELD MEASURING FOR COMBUSTION FLANCE BASED ON PLANE SURFACE ARRAY CCD