Abstract:Analysis of spatial temperature and gas concentration distributions is of great importance for combustion research. Algebraic reconstruction technique (ART) and adaptive algebraic reconstruction technique (AART) based on tunable diode laser absorption spectroscopy are both widely used methods for temperature tomographic imaging in a flame. After being obtained the temperature tomography through iterative method, the gas concentration reconstruction could be determined from a simple division equation (direct gas concentration algorithm) or iterative algorithm (ART gas concentration algorithm or AART gas concentration algorithm) for the second time. For the latter, iterative algorithm was used twice through the whole process. A series of numerical simulations were carried out by three gas concentration reconstruction methods mentioned above. The results demonstrated that AART method had better robustness for different phantoms and stability in the case that measured projections contained different levels of noise. Experimental measurements in a flat methane/air flame on a McKenna burner under three different equivalence ratios (1.0, 0.9, and 0.8) were conducted using AART gas concentration algorithm. The reconstructed results coincide well with those results obtained by thermocouple and theoretical calculation. Both simulation and experiment demonstrate that the AART gas concentration algorithm would be reliable and suitable for simultaneous temperature and H2O concentration tomographic imaging during combustion. As a consequence, this method has unrivalled potential for two-dimensional combustion diagnosis. (C) 2021 Society of Photo-Optical Instrumentation Engineers (SPIE)

Three-Dimensional Temperature Field Reconstruction from Flame Images Using Algebraic Reconstruction Technique

Research on Temperature Distribution of Combustion Flames Based on High Dynamic Range Imaging

Temperature field reconstruction of combustion flame based on high dynamic range images

Image based temperature field reconstruction for combustion flame

Model and Experiment for Three-Dimensional Temperature Measurement Based on Flame Image

Studies On Gas Concentration Reconstruction Methods For Simultaneous Temperature And H2o Concentration Tomographic Imaging In A Flame Based On Tunable Diode Laser Absorption Spectroscopy

Research on algorithm of reconstruction of 3-D temperature distribution in non-symmetric luminous flame

Reconstruction and Editing of Dynamic Flame Temperature Field

Study on Three-Dimensional Flame Temperature Distribution Reconstruction Based on Truncated Singular Value Decomposition

3-D Flame Temperature Reconstruction in Optical Sectioning Tomography

Experimental Verification of Three-Dimensional Temperature Field Reconstruction Method Based on Lucy-Richardson and Nearest Neighbor Filtering Joint Deconvolution Algorithm for Flame Light Field Imaging

Simultaneous Reconstruction of Three Dimensional Field Parameters Based on the Visible and Near-Infrared Multi-Spectral Flame Images

Flame Temperature Reconstruction Through a Multi-Plenoptic Camera Technique

Flame 3D Temperature Field Reconstruction Based on Damped LSQR-LMBC

Reconstruction of flame temperature field with optical sectioning method

Reconstruction of 3D Temperature Profile of Radiative Participatory Flame Based on Digital Refocusing Technique of Light Field Camera

Three-dimensional temperature field visualization reconstruction of charge coupled device radiation image

A Fast Tomographic Reconstruction Method for Flame Temperature Distribution Measurement Based on Direct Solution Algorithm

The Measurement of Intersection Temperature Distribution of Coal Burning Flame Using Algebra Reconstruction Technique (ATR) Based on Radiation Image

Flame Temperature Reconstruction Based on Focused Light Field Camera

A NEW METHOD TO MEASURE NON-SYMMETRIC 3-D TEMPERATURE DISTRIBUTION OF A COAL FLAME