Abstract:The present study aims to produce sandwich composites with curved surfaces with different surface geometries by adding rubber (EPDM) between glass fiber woven fabrics and to examine their behavior under the influence of low-velocity impact numerically and experimentally. For this purpose, glass fiber and rubber layers were added to steel molds manufactured in curved forms and sandwich plates were produced through the vacuum infusion method. Low-velocity impact tests were performed by lowering strikers with a hemispherical tip on the produced curved-surface plates, and the effect of the surface geometry on the impact energy absorption was determined. By using rubber intermediate layers, the energy absorption ability can be increased by a maximum of 21%. The curved surface geometry affects the absorbed energy. If the height of the curved surface composites is kept constant and the width is increased to 1.5 times, the impact energy absorption increases by 16 percent. If the width is kept constant and the height is increased to 2.3 times, the impact energy absorption has decreased by 13 percent. When the impact resistance of composites with triangular rectangular, R125 circular arc and flat geometries with the same height and width are compared, it is observed that the lowest impact absorption ability occurs in the plates with triangular geometry, while the impact damping feature increases as the surface geometry becomes flatter and accordingly the contact surface increases. The impact absorption energies of the specimens were determined to be 82% compared to the flat plates. When the impact absorption energies of the upper side lengths of the outer tangent quadrilaterals to the R125 circle arc are compared, a significant increase in the impact absorption capabilities was observed as the side lengths increased. In the numerical part, the tests performed were modeled using the LS-DYNA finite element package program and the Hashin damage criterion-based MAT162 material model was used in order to see the damage caused to the composite structure in three dimensions after the tests. The numerical results obtained were a minimum of 84% compatible to the experimental results.

Experiments and simulated calculations on the resistance to low-velocity impact of layered plates with a sandwiched ERM

The Modeling of Layered Plates Featuring Electro-Rheological Material Layer and Its Numerical and Experimental Validations

An Experimental and Analytical Investigation of the Dynamic Characteristics of a Flexible Sandwich Plate Filled with Electrorheological Fluid

Low-velocity Impact of Rectangular Multilayer Sandwich Plates

Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Low-velocity Impact on Square Sandwich Plates with Fibre-Metal Laminate Face-Sheets: Analytical and Numerical Research

Dynamic analyses of composite corrugated sandwich plates filled with magnetorheological elastomer resting on elastic foundation

Application of ER fluid in structural vibration control

Energy Absorption Efficiency of Carbon Fiber Reinforced Polymer Laminates under High Velocity Impact

Low-velocity Impact Response of Multilayer Foam Core Sandwich Panels with Composite Face Sheets

Static and dynamic performances of sandwich plates with magnetorheological elastomer core: Theoretical and experimental studies

Experimental estimations of viscoelastic properties of multilayer damped plates in broad-band frequency range

Vibration Characteristics of Rotating Sandwich Beams Filled with Electrorheological Fluids

Vibration analysis of electrorheological sandwich beams with transversely compressible core

Experimental and Numerical Investigation of the Geometrical Effect on Low Velocity Impact Behavior for Curved Composites with a Rubber Interlayer

An Efficient Numerical Method to Analyze Low‐velocity Impact Response of Carbon Fiber Reinforced Thermoplastic Laminates

Dynamic and Acoustic Characteristics High Frequency Region for Sandwich Cylindrical Cavity Embedded with ER Fluid:Experimental Study

Low-velocity Impact Response of Sandwich Plates with GRC Face Sheets and FG Auxetic 3D Lattice Cores

Behaviors of Composite Laminates under Low-Energy Impact Using a Novel Analytical Framework

Vibration Characteristics of Electrorheological Elastomer Sandwich Beams