Abstract:Organic electroluminescence is one of the most promising technology for next generation of flat panel display. Hole transporting layer represents the weakest link in the electroluminescent structure considering the thermal stability of the materials. The most widely used hole transporting material, N,N'-bis (1-naphthyl)-N, N'-diphenyl-1, 1'-biphenyl-4, 4'-diamine (NPB), has a glass transition temperature ( Tg) of 95℃, which is much lower than that of the electron transporting material, tris (8- hydroxyquinoline) aluminum (Alq3) . Based on the good hole transporting property and suitable energy level matched with other materials of NPB, two new hole transporting materials: N, N'-bis(1-naphthyl)- N,N'-di(4-methylphenyl)-1,1'-biphenyl-4, 4'-diamine (NTB) and N, N'-bis(1-naphthyl)-N, N'-di(4- tert-butylphenyl)-1, 1'-biphenyl-4, 4'-diamine (NBB) were synthesized by introducing methyl and tert- butyl groups into NPB to improve its thermal stability. The glass transition temperature (Tg) of NTB and NBB measured by DSC are 108℃ and 129℃ respectively, showing better thermal stability than that of NPB. The ionization energy obtained by ultraviolet photoemission spectroscopy is 5. 2eV for all of NPB and its derivatives. The emission peak in the photoluminescent spectra of the solid films of NTB and NBB are at 455nm and 460nm, which are close to the emission peak of NPB at 440nm. The organic electroluminescent devices using NPB, NTB and NBB as hole transporting layer (HTM) were fabricated with the structure of ITO/CuPc(20nm)/HTM(50nm)/Alq3(60nm)/LiF(0.5nm)/Al(100nm). The emission spectra of the three devices are the same and the green color light was emitted from the Alq3 layer. The turn-on voltages of the devices are 11, 9, 8V for NPB, NTB and NBB, respectively. The brightness of the devices at 15V are 1 000, 1 300, 1 200cd/m2 for NPB, NTB and NBB. The devices with NTB and NBB also show better longevity than that of NPB in a prelimin ary test.

Studies on Electroluminescence of Multilayer Langmuir-Blodgett Films

Structure and electroluminescence characteristics of organic thin film electroluminescent devices

Study on the mechanism of organic thin film electroluminescence

Study of Organic Electrolumenescent Thin Film Cell

A Novel Organic Electroluminescent Device Using A New Eu3+ Polymer As Emitting Layer

Bilayer Electroluminescent Devices of Langmuir-Blodgett Films of Amphiphilic Complex Derivated from 8-Hydroxyquinoline Lanthanum

Electroluminescence from the 1,1,4,4-Tetraphenyl-1,3-butadiene Doped Polymeric Langmuir-Blodgett Films

Blue and green organic light-emitting devices with various film thicknesses for color tuning

Multilayer organic thin film electroluminescence devices

Organic single-quantum-well electroluminescent device

Luminescent Enhancement of Heterostructure Organic Light-Emitting Devices Based on Aluminum Quinolines

Study of the Effect of Film Thickness on the Performance of NPB/Alq3 Double Layer Organic Light-Emitting Diodes

Synthesis of Thermal Stable Organic Hole Transporting Materials for Use in Electroluminescent Devices

Characterization and Luminescence Properties of the Dye-Doped Polymer Langmuir-Blodgett Films

Efficient White Light-Emitting Organic/Polymeric Electroluminescent Device

Blue Organic Electroluminescent Device with an Al/LiF Bilayer Electrode

Pure green and narrow bandwidth electroluminescence from organic light-emitting diodes

Blue organic electroluminescent devices based on a distyrylarylene derivative as emitting layer and a terbium complex as electron-transporting layer

Electroluminescence of Organic Light-Emitting Diodes with an Ultra-Thin Layer of Dopant

Study on organic electroluminescent thin film devices using organic complex of rare-earth europium Eu(DBM)2(AA) phen as emitting layer

Organic Electroluminescent Devices Using Europium Complex As an Electron-Transport Emitting Layer