Study on room temperature curing two-component epoxy resin adhesive for steel crucibles
Zhilin Zhang,Ruilu Yang,Yaping Zheng,Bing Li
DOI: https://doi.org/10.13416/j.ca.2018.06.008
2018-01-01
Abstract:RTV (room temperature curing) type adhesives for steel crucibles of textile equipment have some problems (such as low tensile shear strength, sensitivity of viscosity to temperature, and pungent odor), so the RTV type adhesive was modified by nano-SiO2 (nano-silicon dioxide), thermoplastic resin PSF (polysulfone), high-Mr (relative molecular mass) -EP (epoxy resin) (brand CYD-128, and CYD-014), and polyether amines. The research results showed that the curing agent component modified by polyether amine can effectively improve the odor of the adhesive. The modified effect of PSF and CYD-014 on EP component was relatively best when mass fractions of PSF and CYD-014 were 1％ and 5％ respectively. The modified adhesive had the good comprehensive performance and could fully meet the practical use requirements because its room temperature tensile shear strength was 20.79 MPa, the curing heat release was 156.5 J/g, the sensitivity of viscosity to temperature was reduced, and the odor was improved when mass ratio of m (modified EP component) ∶m (modified curing agent component) was 2∶1.