Abstract:The silicon carbide (SiC) devices have faster switching speed than that of the conventional silicon (Si) devices, which however may cause excessive device voltage overshoot. Larger gate resistance can help to restrain the overshoot, it however slows down the switching speed and increases switching losses. There are other methods that can mitigate the voltage overshoot, e.g., using low-inductance busbars, adding snubber circuits, etc. In this article, the busbar design for a 250-kW SiC three-level T-type inverter is investigated. The current commutation loops (CCLs) are first analyzed using a single-phase equivalent circuit. Then the detailed busbar design methods, especially a 3-D busbar design concept, are proposed to select the optimal stacking order for the multilayer laminated busbar and to address constraints posed by the physical terminal arrangements of SiC modules and dc-link capacitors. The stray inductance in each CCL is extracted via a finite element analysis and validated on the actual inverter busbar prototypes using an impedance analyzer. To further minimize the busbar stray inductance, a hybrid busbar structure with printed circuit board based buffer circuit using high-frequency decoupling capacitors is designed and evaluated in this article. Finally, the effectiveness of the designed busbars as well as the buffer circuit are validated using experimental studies.

Modeling of Busbars in High Power Neutral Point Clamped Three-Level Inverters

Simplified Modeling of Power Electronic Interfaced Load Considering Harmonics

Three-level Inverter and Induction Machine's SVV Control Technology and Its Simulation

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

Busbar Optimization Design for High Power Converters

Small-Signal Modeling And Experimental Validation Of The Three-Phase Quasi-Z-Source Inverter

Design, Simulation and Analysis of the Low Stray Inductance Bus Bar for Voltage Source Inverters

Study On Planar Busbar Regarding Stray Inductance Minimization And Oscillation Suppression For High Power Converter

MODELING AND DESIGN OF THREE-PHASE INVERTER WITH RECTIFIER LOAD

High Order Distribute Circuit Model of Laminated Busbars and Its Order Reduction Techniques for Simulating Fast Turn-on and Turn-off Transients

Study And Design Of Noninductive Bus Bar For High Power Switching Converter

Development of a compact 750KVA three-phase NPC three-level universal inverter module with specifically designed busbar

A Coupled 3D FEM-Distribute Circuit Model for Numerical Analysis of Small Time Scale Transients of an IGBT based Inverter

Modeling and Research of Three-Phase Inverter Powering Nonlinear Load

High-frequency modeling based EMC performance improvement of power supplies in inverters

Modeling for General Snubber Circuits and the Reason for Voltage Unbalance between the Inner and Outer Devices in Three Level IGBT Converters

Modeling and Triple-Loop Control of ZVS Grid-Connected DC/AC Converters for Three-Phase Balanced Microinverter Application

Configuration of Low Inductive Laminated Bus Bar in 750 Kva NPC Three-level Universal Converter Module of High Power Density

Methodology of Low Inductance Busbar Design for Three-Level Converters

The Analysis of Surge Voltage in Three-phase IGBT Inverters

Busbar Design and Optimization for Voltage Overshoot Mitigation of a Silicon Carbide High-Power Three-Phase T-Type Inverter