Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. In this paper, we solve the vibration problem of a finite bar with a viscously damped boundary in conjunction with a spring on the same side subject to the support motion on the other side. To avoid the computation of complex modes and the difficulty of orthogonal conditions for the partial differential equation (PDE) of a continuous system, two alternatives are employed. One is the analytical derivation by using the diamond rule of the method of characteristics. The advantage is that this method can yield an analytical solution. However, the disadvantage is that the method can be only applied to some simple problems such as a linear system and the one-dimensional (1D) wave equation. The other numerical method, finite element method (FEM), is incorporated into a general-purpose program to solve this problem. The advantage of the FEM is that this methodology can be applied to solve various problems such as different PDEs. Therefore, the solution obtained by using the FEM is compared with that of the analytical solution. Two special cases, only a spring and a damper alone, are also considered by using the FEM. Interestingly, the same silent area is captured in the displacement profile by using the FEM for the three cases. We also find that the displacement profiles have slope discontinuity which only occurs on the characteristic line. After the wave front arrives at the boundary, various responses appear due to different boundaries, spring, damper and both. It is found that the displacement amplitude of the general case is smaller than the other two special cases. This result matches the application of engineering practice.

Numerical solution for the dynamic response of a two-side four-bar beating-up motion of an air-jet loom

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Semi-analytical Solution for Dynamic Behavior of a Fluid-Conveying Pipe with Different Boundary Conditions

Dynamics Analysis and Simulation of Beating-up Motion of a Rapier Loom

Nonlinear Vibration Analysis of Forced Response for Rubbing Problems Using the Automatic Differential Frame

On The Method Of Linearizing Dynamic-Model And Solving Forward Dynamic Problems Of Flexible Robots

Numerical Computation of Differential-Algebraic Equations for Non-Linear Dynamics of Multibody Systems Involving Contact Forces

Vibration characteristics of wallboard and four-bar linkage beating-up mechanism of air-jet loom

Study of Support Motion of a Finite Bar with a Boundary Damper and a Spring Using Analytical Approaches and FEM

TWO L-STABLE ALGORITHMS FOR SOLVING STRUCTURAL DYNAMIC RESPONSES

Stability and Response Analysis of Symmetrical Single-Disk Flexible Rotor-Bearing System

A full functional numerical method on self-excited vibrating body over flow

Analysis of Reed-Base's Front Extreme Position for Four-Bar Beating-Up Linkage

Dynamic Analysis of Warp Knitting Machine Guide Bar Swing Mechanism Based on Flexible Multi-Body System

Differential Quadrature Method for Stability Analysis of Dynamic Systems With Multiple Delays: Application to Simultaneous Machining Operations

Improvement of the Warp Loosing Motion and its Static Analysis of the Back Rest System for an Air-jet Loom

Dynamical Analysis of Flexible Roll-Die Forming Machine

Numerical simulation of the dynamic responses of railway overhead contact lines to a moving pantograph, considering a nonlinear dropper

Dynamic Analysis and Optimization of Machine Tool in Consideration of Joint Parameters

Analytic Solution to Nonlinear Dynamical System of Dragon Washbasin

Dynamic Analysis and Simulation of the Stretching Mechanism of Modified Pipeline Robot Duster