Abstract:Textile Research Journal, Ahead of Print. The traditional tension control method with tension as the control target is to uniformly control multiple warp beams and has low control accuracy. Simultaneously, it is difficult to install an independent sensor for a single warp beam to achieve a closed-loop control, due to the space limitation. Combined with the theoretical model, this paper proposes a novel method to achieve the closed-loop unwinding tension control of warp beams by taking the unwinding length as the control target and using the self-developed turns measuring device. First, the dynamic model between different factors and unwinding tension was established in this study. Furthermore, the influence of unwinding radius, unwinding speed and winding density on the tension was investigated to clarify the fluctuation mechanism. Based on these, simulation experiments were conducted for verifying the control effect of the proposed method. The results showed that the proposed single warp beam unwinding tension control method can achieve constant tension throughout the unwinding process, which is superior to the empirical open-loop control method that adjusts the tension according to the linear proportional change of the braking torque. Meanwhile, it has the similar control effect as the ideal closed-loop tension control method, maintaining stability under different reference tensions and disturbances. In addition, the proposed multiple warp beams unwinding tension control method also outperformed the traditional unified tension control method. Our measuring device can be easily installed on the single warp beam for control, resulting in consistent tension between multiple warp beams. Therefore, the proposed methods have a certain control effect and application value.

Analysis of Reed-Base's Front Extreme Position for Four-Bar Beating-Up Linkage

Kinematics and dynamicsanalysis for slotting machine six bar linkage

Dynamics Analysis of Mechanisms with Elastic Bars and Three-Dimensional Clearance Revolute Joints

Dynamics Analysis and Simulation of Beating-up Motion of a Rapier Loom

Design Research on Roller of New Fiber Carding Machine

Research on force control theory of adaptive beam sting structure

Vibration characteristics of wallboard and four-bar linkage beating-up mechanism of air-jet loom

Dynamic Analysis of Warp Knitting Machine Guide Bar Swing Mechanism Based on Flexible Multi-Body System

Control System of Five-Axis Drived Sample Weaving Machine

ANALYZING INFLUENCE OF NONPRESTRESSED REINFORCEMENT ON THE BEHAVIOR OF UNBONDED PRESTRESSED CONCRETE BEAMS

Test and Analysis of Weft Force for Air-Jet Loom's Main Nozzle

Warp tension control system based on fuzzy-PI parallel control

Research on the automatic modeling and performance prediction of plain-woven composites based on beam elements

The influence of the friction field on accelerating position distribution

Real-Time Simulation and Movement Analysis of Rapier Loom Movement Mechanism

Finite Element Analysis of Dynamic Knitting Process on Flat Knitting Machine Based on ABAQUS

Dynamic tension control for warp beams on sizing machine based on unwinding length monitoring

Control strategy for single-layer warp tension in a carbon fiber 3D loom based on fixed-time theory and sliding mode theory

Influence of contact parameters on the wear characteristics of fixture-bar friction pair in low-stress cropping

Establishment and effectiveness of an evaluation method for load-bearing performance of cotton sized warp yarn

An analysis on the kinematics of looping mechanism of warp knitting machine