Abstract:The comber is very important in the spinning for high quality yarns, in which the nipper mechanism (NM) determines the quality of the yarn it combs. This paper is to connect topology and multi-body dynamics to reveal the principle of impact motion of the nipper mechanism. Firstly, the working process of the NM is analyzed and corresponding kinematic models of work sub-phases are derived. Subsequently, the transition from the work phase of the jaw closed to the opened is studied. The research results show that during the transformation process, the mechanism presented another work phase with multiple impacts, which is the main reason why the NM could not stably clamp the cotton clump and thus affect the quality of the yarn combed by the comber. According to the relative coordinate method, the dynamic model of the NM is set up. Combining the classical collision theory and the restitution coefficient equation, the acquisition of the impact impulse generated at the jaw and the subsequent motion of the mechanism are decided. Finally, the NM in the E62 comber is taken as an example to verify the correctness of the established dynamic model, and the influences of different input speeds, restitution coefficients, and stiffness coefficients of spring on the jaw’s impact are studied. This has certain theoretical value for improving the speed and efficiency of the comber.

An analysis on the kinematics of looping mechanism of warp knitting machine

Kinematics and dynamicsanalysis for slotting machine six bar linkage

Dynamic Analysis of Warp Knitting Machine Guide Bar Swing Mechanism Based on Flexible Multi-Body System

Yarn-guiding system based on servo control and crank-link mechanism

Real-Time Simulation and Movement Analysis of Rapier Loom Movement Mechanism

Kinematic Analysis for the Thread Taking-up Mechanism of Sewing Machine and the Optimum Synthesis

Kinematics Analysis of Transmission Mechanism of Electronic Jacquard Machine Based on Virtual Prototype and Vector Method

Implementation of Pattern Sewing for Intelligent Knot Tying Machine

The Development and Realization of Weave Simulation CAD System

THE OPTIMUM DESIGN OF KINEMATICS MODEL FOR TUMBLE CNC FILAMENT WINDING MACHINE

Optimal design and experiments of a novel bobbin thread-hooking mechanism with RRSC (revolute–revolute–spherical–cylindrical) spatial four-bar linkage

Non-Axisymmetric Overbraiding Process Modeling Based on Enhanced Kinematic Models

Analysis of Yarn Tension Based on Yarn Demand Variation on a Tricot Knitting Machine

Loop Order Analysis of Weft-Knitted Textiles

Finite Element Analysis of Dynamic Knitting Process on Flat Knitting Machine Based on ABAQUS

3D simulation of warp-knitted double-needle bed creel jacquard fabric based on the stitch layer

Dynamics Analysis of Mass Block and Optimization Design of Take-up Mechanism for Space Net

Kinematic Simulation and Trajectory Optimization for the Enclesed Five-bar Feeding Mechanism of Sewing Machine

A New Method on Computer Simulation of Dobby Weave

Analysis and modeling for the dynamics of the nipper mechanism considering jaw’s impacts

Study on Dynamic Simulation of Transverse Needle Mechanism