A New Method on Computer Simulation of Dobby Weave

王华,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1671-7147.2003.03.015

2003-01-01

Abstract:The paper brings forward a new method for computer simulation of dobby weave by rendering photo-realistic yarn and processing weave float which takes great effect on appearance of weave. It greatly reduces simulation time by using active template library.

What problem does this paper attempt to address?

Simulation of Realistic Fabric Surfaces with BRDF Algorithm

ZHANG Lu,XU Duan-qing

DOI: https://doi.org/10.3969/j.issn.1671-7147.2007.03.014

2007-01-01

Abstract:Based on original yarn model,light interaction model is taken into account to enhance the realistic effect of fabric surface. Using BRDF function of the material can render the weave of microstructure of the fabric.Meanwhile,this paper emphasizes the light interaction model of the fabric,the algorithm of BRDF and the implementation details.The improved simulation system with BRDF algorithm can generate more realistic texture.For coarse and complicated weave pattern jacquard,the simulation is especially perfect.
The Development and Realization of Weave Simulation CAD System

王志东,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1671-0444.2004.05.013

2004-01-01

Abstract:In this article, the authors establish a new method of developing weave simulation CAD system. Firstly, a mathematic model for yarn simulation is set up, which is based on light and shade effect generated by illumination. And then, after abstracting the surface layer information of woven fabric, the authors finally realize the weave simulation, with the floating principle fully considered. Besides, each functional module is designed to be relatively independent, which is helpful for updating system in the future.
Computer Simulation of Fancy Yarns Based on Structural Model of Appearance

Ruilin Zhang,Weijie Guo,Yan Hu

DOI: https://doi.org/10.1109/AICI.2009.133

2009-01-01

Abstract:Based on theories of computer graphics and computer simulation technology, this paper has set forth appearance parameter models of fancy yarns in the light of the spinning principle and the physical and geometric structure of fancy yarns. And in combination with local illumination model and diffuse reflection model, the paper has solved the key problems of graphics expression of yarn appearance and simulating structural effect of yarns in light. This paper will discuss the methods of simulating three kinds of fancy yarn - loop yarn, wave yarn and chenille yarn. A visual representation, namely parameterized structural model of appearance, is created by abstracting from the physical and geometric configuration of real fancy yarn. Such improved approach for simulation would help for further optimizing the design of the fabrics made from fancy yarns, which has the theoretical and practical value.
Research and Realization of Dobby CAD System

LU Hong-bin,GUO Song-ke,ZHANG Xiu,DING Lei-ming,ZHANG SEN-lin

DOI: https://doi.org/10.3969/j.issn.1671-7147.2005.02.006

2005-01-01

Abstract:The three-dimension characteristics of yarn and the impact on the fabric appearance exerted by float and the parameters in the system are considered in the paper. The paper also employs the illumination model of yarn to achieve a simulation of true-to-nature fabric appearance.
Computer Simulation of Brocade Based on Modeling Structures

Zhen Fan,Bowen Zhou,Senlin Zhang,Meiqin Liu

DOI: https://doi.org/10.1109/cyber.2017.8446525

2017-01-01

Abstract:With the development of textile CAD, great advances have been made on fabric simulation. Most of their methods are based on the simulation of yarn to simulate fabric. However, the effect of their simulation of fabric depends on the complicated and fuzzy characteristic of fabric. From yarn to generate fabric, the fabric loses the reality on wrinkles, lightness, and randomness. According to analyzing the brocade picture, there are few weave structures on the brocade. In this paper, a method has been approved to simulate brocade with weave structure and yarn texture. Firstly, the weave structures on brocade were recognized from the picture of brocade. Secondly, the texture information on the yarn was combined with color and luminance. Finally, based on the weave structures and the texture information, the 2D simulation image of brocade was created. Compared with the true image of brocade, it has same structure with sense of reality on the appearance of the simulated brocade. Therefore, the method is useful for the simulation of brocade and contributes to the traditional simulation of fabric with less weave structures.
THE RESEARCH OF ALGORITHM OF STROKE BASED ON B-SPLINE IN FABRIC CAD SYSTEM

Zheng xiuyu,Xu Duanqing

DOI: https://doi.org/10.3969/j.issn.1000-386X.2007.04.009

2007-01-01

Abstract:During the implementation of the fabric CAD system which faces to textile corporations in Shaoxing,in order to simulate the stroke,which is a characteristic technic,impressively and effectively,this paper first brings forward an algorithm of interpolation that uses B-spline curves which pass the setting points,then describes the theory and algorithm used to produce images of stroke in detail,next describes the algorithm of a group of strokes.At last two effect images show the effect of the algorithms.This kind of algorithms has already been used by fabric CAD system which faces to textile corporations in Shaoxing successfully.
A New Algorithm for Yarn Simulation

王志东,颜钢锋,张瑞林

DOI: https://doi.org/10.3969/j.issn.1673-3851.2004.02.011

2004-01-01

Abstract:Realizes the conversion from RGB Color-model to HLS Color-model and then combines two algorithms-lightness degression and diffusion, to simulate yarns more precisely.
3D simulation of warp knitted boa for visual and quicker design

Zhijia Dong,Haisang liu,Gaoming Jiang,Pibo Ma

DOI: https://doi.org/10.1177/00405175241249457

IF: 2.3

2024-05-23

Textile Research Journal

Abstract:Textile Research Journal, Ahead of Print. Recent stitch-based simulation methods permit effective and realistic simulation for the planar structure of warp-knitted fabrics. However, simulating the warp-knitted fully formed jacquard fabric with a specific shape remains a challenge. Characteristics of diversity and complexity of this kind of fabric greatly raise the simulation difficulty. We propose a new modeling and simulation method based on the mesh model with complex shapes. We start from the analysis of the double needle bed warp-knitting technique, and establish a three-dimensional fabric mesh model, producing a finer stitch placement on a double needle bed knitted structure. Due to the deformation date derived from the jacquard pattern, stitches are placed at the actual locations. The used stitches forming the fully formed products are rendered according to the jacquard pattern. Using the two-dimensional plates and corresponding three-dimensional objects as input models to define the shape of the warp-knitted products, stitches are transferred from two to three-dimensional model objects by spatial mapping. The interface of our modeling system allows for designing complex jacquard patterns and selecting specific models for warp-knitted products. The method we propose leads to a visible design process with results visualization, which is convenient for designers to modify the knitting parameters covering knitting information and jacquard pattern before the product is knitted. The simulation method can be applied to the rapid design of the warp-knitted boa, which can reduce duplicate sampling, shorten the design process, and save raw material costs. Further research will be carried out in the future to improve this simulation method.

materials science, textiles
Analasis of Weave Simulation Technique and 3D Implementation Based on OpenGL

朱华健,张森林

DOI: https://doi.org/10.3969/j.issn.1671-7147.2004.02.007

2004-01-01

Abstract:The paper introduces the current weave simulation technique and points out the shortage of viewport,3D effect and lighting etc. Some effective methods about NURBS under OpenGL are also presented, to solve the problems of the surface weave simulation, lighting and multiple visual angle etc, and to obtain a remarkable improvement in 3D weave simulation.
Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Zhenrong Zheng,Xiaoming Zhao,Chunhong Wang,Xiaojun Sun

DOI: https://doi.org/10.1080/00405000.2014.952966

2014-01-01

Abstract:Fabric structure has a significant effect on the thermal protective performance of fabrics. Before studying the thermal performance of textiles by numerical methods, it is essential to create geometric models of textile structures. Common fabrics, such as plain weave, 2/1 twill, 3/3 twill, 5/3 satin, and double layer fabric, were modeled using TexGen software. To obtain the input data for geometry simulation of fabrics, geometric measurements were studied. Methods of modeling fabric geometries according to their yarn path function and cross-sectional shapes were introduced. The appearances of the geometric models were very close to the structures of the real fabrics when compared to their light microscopic images. The fabric models were well used to simulate the heat transfer properties of glass fiber fabrics.
Realization of Textile Simulation System in 2D Virtual Environment

ZHANG Sen-lin,LI Wei

DOI: https://doi.org/10.3785/j.issn.1006-754x.2006.02.014

2006-01-01

Journal of Engineering Design

Abstract:To shorten developing time,reduce cost of textile design and build more effective communication between enterprises and customers,a new realization method to simulate real effect of textile in 2D virtual environment is presented.By utilizing accumulative bowstring arc length curve for curve fitting,and adding inner control lines in curving quadrangle,established in 2D virtual environment,simulation effect and accuracy are improved and then finite element mesh is generated with bilinear interpolation.Finally by using the texture mapping technology based on triangle mesh,objective area trimming and color synthesis of pixel point technologies,mapping between texture and curving mesh is completed.Designers can simulate the effect of the designed products in this system,programmed in Delphi7,at the beginning of design.System architecture,implementation principle,and core algorithm are introduced and then a detailed and effective method for texture mapping is provided.Through the above method,a good simulation effect of texture mapping is gained,which demonstrates that this method has a wide application prospect.
Study on automated geometric modeling for glass fiber woven fabric

Yushuang Zhang,Hongmei Wang,Xiaoming Zhao,Zhenrong Zheng

DOI: https://doi.org/10.3969/j.issn.1004-7093.2015.09.005

2015-01-01

Abstract:There was a great relationship between fabric structure and its properties. Four kinds of glass fiber fab-rics with different structures, which were the single-layer fabric of basket and twill, double twill, and three-layer interlock fabric, were designed and woven, and the geometric structures of these fabrics were simulated. The results showed that, based on the physical structure parameters of yarns and the actual photoes of fabrics, it was possible to create geometric models of fabrics, and the models could re-flect spatial structure of the yarns.
Computer Simulation of the Appearance of Jacquard Woven

顾尔丹,马凌洲,许端清,陈纯

DOI: https://doi.org/10.3969/j.issn.1004-731X.2001.03.041

2001-01-01

Abstract:CAD technique has been broadly used in jacquard weaving industry. One of the most important aspects of the jacquard CAD/CAM system is to simulate the appearance of jacquard woven during output However, current system on simulation is actually similar to a pattern design system, where pattern color but not fabric feature is visible, thus is far from satisfactory. The main drawback of those systems is that third dimension of fabric is not striking. Especially when the color of longitude and woof is same, the output of simulation is only a big color rectangle. In order to resolve efficiently problems of lengthy product flow, time-consuming update to pattern in traditional way, we put up the simulation of fabric appearance to CAPSP-III, a CAD/CAM system faced on jacquard industry. In the paper, the thread characteristics, arrangement and fabric organizational mode during weaving are investigated at first, then the feature which most influences woven appearance has been chosen and formulized. Combined with this, the classic illumination model is used to render photo-realistic appearance of jacquard woven. An effective template of illuminant factor is suggested to speed rendering. The implement of proposed approach is described in detail and some result images are given too. Finally, the main problem of current method and the future work are discussed.
CompuWoven

Ye Tao,Nannan Lu,Caowei Zhang,Guanyun Wang,Cheng Yao,Fangtian Ying

DOI: https://doi.org/10.1145/2851581.2892293

2016-01-01

Abstract:Weaving is a traditional technology for making everyday products by hand that involves interlacing planar pieces to endow tough and pliable properties, (e.g., bamboo and stiff paper) to create 3D shapes. The technique has been extensively applied throughout history by various means, and is favored due to its low cost, accessibility, and environmental friendliness. Traditional weaving technology, however, requires accumulated craft expertise and actual production through numerous iterations, which is generally very time-consuming -- this limits its design aesthetic and ubiquitous use. Inspired by these problems, we present a novel hand-woven fabrication approach called CompuWoven to customize and weave 3D objects from planar pieces. The key idea is to establish an approach for producing 3D objects that is similar to weaving tradition, but without the need for manual experience. In addition, CompuWoven eliminates the former need for supporting structures, reduces actual physical material waste and allows for more complicated and irregular designs.
A new texture morphing method for visual presentation of textile product

Peng Wang,Mingmin Zhang,Zhigeng Pan,W Peng,MM Zhang

DOI: https://doi.org/10.1117/12.477108

2002-01-01

Abstract:Textile emulation is a key problem in the visual textile presentation. In this paper, we present a new algorithm to achieve the realistic feeling of textile. This algorithm first divides the target area into some texture blocks that have different texture directions. Then morphs the texture coordinate of each texture block. The calculating speed of this algorithm is very fast, so it is more suitable for the visual textile presentation of e-commence.
Simulation of Fabric in 2d Virtual Scene Based on Mesh Model

Xiaona Fan,Senlin Zhang,Zhen Fan,Zhaoqi Chen

DOI: https://doi.org/10.1109/iscc-c.2013.122

2014-01-01

Abstract:A fabric simulation system of 2D virtual scene is researched and implemented in this paper. The system not only simulates the folds and transformations of the scene realistically but also allows replacement and modification of fabric. The finite element mesh algorithm is used to model the virtual scene. In order to avert deformations of texture mapping, the cubic polynomial interpolation algorithm is proposed in this paper. It can overcome the low-pass characteristic of the bilinear interpolation algorithm by eliminating the jags generated from texture mapping. To make the scene simulation more stereo, this paper utilizes the intensity based fusion algorithm, which retains the original scene's intensity. The experimental results show that the two-dimensional fabric scene simulation system is accurate and realistic, and has rapid time response.
Rapid simulation of knitted fabrics based on a ribbon yarn model

Song Mingming,Peng Jiajia,Chang Chenyu,Liu Feng,Lu Zhiwen

DOI: https://doi.org/10.1177/00405175241268795

IF: 2.3

2024-10-18

Textile Research Journal

Abstract:Textile Research Journal, Ahead of Print. In the study, an innovative three-dimensional ribbon-based yarn model simulation technique is introduced, aimed at significantly enhancing the realism and speed of knitted fabric simulation through efficient model construction and rendering processes. The method successfully overcomes the limitations of traditional two-dimensional loop models and tubular yarn models, accurately capturing the textural details of knitted fabrics with a vivid three-dimensional representation. Experimental results demonstrate the outstanding performance of this simulation system in simulating the fuzz effects of yarn and in processing speed. This technology offers significant potential in textile design and production, notably in boosting design efficiency and accelerating new product development. By employing low-cost image capture methods, the study effectively reduces technical and financial barriers in knitted fabric simulation, enhancing its practical and industrial applicability.

materials science, textiles
Knitted fabric simulation: A survey

Xinrong Hu,Meng Wang,Junping Liu,Jinxing Liang,Kai Yang,Ruiqi Luo,Fei Fang,Tao Peng

DOI: https://doi.org/10.1002/cav.2262

IF: 1.01

2024-07-01

Computer Animation and Virtual Worlds

Abstract:Abstract Knitted fabric simulation seeks to create lifelike virtual representations of various knitted items like sweaters and socks using mathematical models and advanced simulation techniques. Significant advancements have been achieved in this area. Visual simulations of these fabrics now boast enhanced details, textures, and colors, closely resembling real‐world counterparts. Additionally, physical simulations have improved the movement and deformation aspects of virtual knitted fabrics, enhancing their realism. However, challenges remain. One major concern is the computational demands of these simulations, which can hinder real‐time interactions. Another issue is refining the accuracy of material models, especially when simulating diverse fibers and textures. This paper aims to review the current state of knitted fabric simulation and speculate on its future directions.

computer science, software engineering
Three-dimensional simulation based on mesh modelling for warp-knitted fully-formed garments

Haisang Liu,Gaoming Jiang,Zhijia Dong

DOI: https://doi.org/10.1108/ijcst-09-2021-0122

2024-01-02

International Journal of Clothing Science and Technology

Abstract:Purpose The warp-knitted fully-formed shorts are one kind of fully-formed garments knitted by a double-needle bar machine, which is widely used in the medical field. Because of its distinctive forming method, designers are unable to grasp the final effect of the product accurately during the design process. The purpose of this paper is to clarify a visible 3D simulation method in the design process along with the knitting method and structure characteristics, which is reflected in the final product effect. Design/methodology/approach This study introduces a simulation process for warp-knitted fully-formed fabric from an input 3D surface model group. Stitch mesh models are established according to the garment structure and the triangle index of the garment model that swchape-controlling points belong to is calculated. The garment model group includes a 2D plate and a 3D model, between which there is a space coordinate transformation relationship. The study makes use of the 3D tubes to connect the coordinate points in order and render the tubes in real yarn colors. The effects of two parameters, radial segment and tubular segment, are analyzed and decided to obtain a fine surface within a reasonable rendering time. Findings A stereoscopic simulation process from flat fabric to 3D product is realized using computer graphics technology. The warp-knitted fully-formed short is shown during the design process within a short time by setting the rendering parameters of tubular segments (ts = 125) and radial segments (rs = 6). Originality/value Visual simulation for the shorts provides a time-saving and resource-saving method for structure design and parameter modification before knitting. There is no need to knit samples repeatedly to satisfy demand, which indicates that it is a saver of time and resources.

materials science, textiles
Design of Fabric Simulation System Based on WebGL

Bowen ZHOU,Senlin ZHANG,Zhen FAN

DOI: https://doi.org/10.3969/j.issn.1005-2895.2017.03.002

2017-01-01

Abstract:In order to realize the function of fabric simulation in computer aided design (CAD),the fabric simulation display system based on WebGL was designed.The real fabric structure was extracted by K-means clustering algorithm.The 2D simulation was generated by the real fabric structure and divided into areas.The 3D simulation based on WebGL adopted the pseudo-curved mesh model to correspond to the self-defined region on the three-dimensional model.The 3D simulation blended with illumination model simulated the fabric realistic simulation in 3D Scene.The simulation results show that the realistic effect can be obtained.The system can be used to realize the combination of 2D and 3D simulation of fabric, and has the function of auxiliary design and better practical value.

A New Method on Computer Simulation of Dobby Weave

Simulation of Realistic Fabric Surfaces with BRDF Algorithm

The Development and Realization of Weave Simulation CAD System

Computer Simulation of Fancy Yarns Based on Structural Model of Appearance

Research and Realization of Dobby CAD System

Computer Simulation of Brocade Based on Modeling Structures

THE RESEARCH OF ALGORITHM OF STROKE BASED ON B-SPLINE IN FABRIC CAD SYSTEM

A New Algorithm for Yarn Simulation

3D simulation of warp knitted boa for visual and quicker design

Analasis of Weave Simulation Technique and 3D Implementation Based on OpenGL

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Realization of Textile Simulation System in 2D Virtual Environment

Study on automated geometric modeling for glass fiber woven fabric

Computer Simulation of the Appearance of Jacquard Woven

CompuWoven

A new texture morphing method for visual presentation of textile product

Simulation of Fabric in 2d Virtual Scene Based on Mesh Model

Rapid simulation of knitted fabrics based on a ribbon yarn model

Knitted fabric simulation: A survey

Three-dimensional simulation based on mesh modelling for warp-knitted fully-formed garments

Design of Fabric Simulation System Based on WebGL