Γ-Radiation Synthesis and Characterization of Polyacrylamide–silver Nanocomposites

YJ Zhu,YT Qian,XJ Li,MW Zhang

DOI: https://doi.org/10.1039/a702946b

IF: 4.9

1997-01-01

Chemical Communications

Abstract:Polyacrylamide-silver nanocomposites with a silver particle size distribution ranging from 2 to 20 nm in a polyacrylamide matrix are synthesized by gamma-irradiation at room temperature.

What problem does this paper attempt to address?

Preparation Of Uniformly Dispersed N-Isopropylacrylamide/Acrylic Acid/Nanosilver Composite Hydrogel And Its Anti-Mold Properties

Rui Peng,Huilong Yu,Chungui Du,Jingjing Zhang,Ailian Hu,Qi Li,Yating Hua,Hongzhi Liu,Shimin Chu

DOI: https://doi.org/10.15376/biores.16.1.441-454

2021-01-01

BioResources

Abstract:To overcome the agglomeration tendency of nanosilver composite hydrogels and to improve their anti-mold properties, a method of preparing N-isopropylacrylamide/acrylic acid/nanosilver composite hydrogel was developed using the free radical polymerization method. The composite hydrogel was characterized via infrared spectroscopy, dynamic light scattering, transmission electron microscopy, and X-ray photoelectron spectroscopy in order to explore the effects of the acrylic acid content on particle size and dispersion properties of the composite hydrogels. The elemental composition, microstructure, and anti-mold properties of the bamboo strips treated with the composite hydrogel were also determined. The results showed that the composite hydrogel prepared using the novel method described in this study had good dispersity. Composite hydrogels with the smallest particle size and optimized dispersion were produced when AAc concentration was 0.64 mu L/mL. The composite hydrogel effectively filled and covered the bamboo cells after treatment. Moreover, it displayed good anti-mold properties as well as retaining the color of the bamboo.
A Convenient Ultraviolet Irradiation Technique For Fabrication Of Silver-Polymer Nanocomposites

Yong Zhou,Shuhong Yu,Cuiying Wang,Yurui Zhu,Zuyao Chen

DOI: https://doi.org/10.1246/cl.1999.677

1999-01-01

Chemistry Letters

Abstract:Silver-polyacrylamide(Ag/PAM) nanocomposites and silver-polymethylmethacrylate(Ag/PMMA) nanocomposites with well homogeneously dispersed silver nanoparticles in polymer matrices were prepared by a novel ultraviolet irradiation technique at room temperature.
Synthesis of PbS/poly(vinyl Acetate) Nanocomposites by Γ-Irradiation

ZP Qiao,Y Xie,YJ Zhu,YT Qian

DOI: https://doi.org/10.1016/s0921-5107(00)00461-x

2000-01-01

Abstract:γ-Irradiation was used to prepare nanocrystalline composites PbS/poly(vinyl acetate) at room temperature, in which the inorganic phase displays uniformity of size and homogeneous dispersion.
Synthesis of Nanosilver/Pmma Composites Via Ultrasonically Bi-In Situ Emulsion Polymerization

Guo Cai Xu,Jing Yu Xiong,Xiao Li Ji,Yan Li Wang

DOI: https://doi.org/10.1177/0892705707083633

IF: 3.0272

2007-01-01

Journal of Thermoplastic Composite Materials

Abstract:Silver-poly(methyl methacrylate) (Ag/PMMA) nanocomposites were successfully synthesized by bi-in situ ultrasonic radiating the emulsion containing methyl methacrylate (MMA) monomer and silver nitrate; no initiator or reductant in this method. The resultant Ag/PMMA nanocomposites were charazcterized by infrared spectroscopy, high resolution transmission electron microscopy, and X-ray diffraction. The results revealed that nanosilver as core within the composites particles were uniform polycrystallines. The thermoanalysis of the nanocomposites showed that the nanosilver within the nanocomposites possessed the effect of the small dimension. The experimental factors such as systemic temperature, the concentration of the silver nitrate, and contents of MMA on the final conversion of monomer were also discussed. It is interesting that the polymerization can be promoted by silver clusters.
Synthesis of PbS/polyacrylonitrile Nanocomposites at Room Temperature by Γ-Irradiation

Zhengping Qiao,Yi Xie,Ying-Jie Zhu,Y. Qian

DOI: https://doi.org/10.1039/a808965e

1999-01-01

Abstract:γ-Irradiation was successfully used to prepare nanocrystalline composites of PbS/polyacrylonitrile with 23 wt.% lead sulfide at room temperature, in which the inorganic component displays homogeneous dispersion in the polymer matrix. X-Ray powder diffraction and infrared spectra were used to characterize the product. Its morphology was determined by transmission electron microscopy.
Single-Step Synthesis Of Nanocrystalline Cds/Polyacrylamide Composites By Gamma-Irradiation

Zp Qiao,Y Xie,G Li,Yj Zhu,Yt Qian

DOI: https://doi.org/10.1023/A:1004780830966

IF: 4.5

2000-01-01

Journal of Materials Science

Abstract:gamma-Irradiation has been used to prepare nanocrystalline composites-CdS/polyacrylamide with 18 wt % cadmium sulfide at room temperature, in which the inorganic phase displays uniformity of size and nearly uniform dispersion. The formation of nanocrystalline CdS and the polymerization of acrylamide are in a single step. X-ray Powder Diffraction and Infrared Spectra were used to characterize the product. Its morphology was determined by Transmission Electron Microscopy. (C) 2000 Kluwer Academic Publishers.
A Novel in Situ Ultraviolet Irradiation Polymerization–Photolysis Technique for Fabrication of Polyacrylamide-MS (M = Cd, Pb, Zn) Nanocomposites at Room Temperature

Yong Zhou,Hao Lu,Yuan Hu,Yingjie Zhu,Zuyao Chen

DOI: https://doi.org/10.1246/cl.2000.1308

2000-01-01

Chemistry Letters

Abstract:Polyacrylamide (PAM)-MS (M = Cd, Zn, Pb) inorganic-polymer nanocomposites with homogeneously dispersed semiconductor nanoparticles of narrow size distribution in the polymer matrices were prepared by a novel in situ ultraviolet irradiation polymerization–photolysis (UIPP) technique at room temperature.
Synthesis of CdS/polyacrylonitrile nanocomposites by γ-irradiation

Zhengping Qiao,Yi Xie,Jianguang Xu,Yingjie Zhu,Yitai Qian

DOI: https://doi.org/10.1016/S0025-5408(00)00325-1

IF: 5.6

2000-01-01

Materials Research Bulletin

Abstract:γ-Irradiation was used to prepare homogenous nanocrystalline composites of CdS/polyacrylonitrile with 19.4 wt% cadmium sulfide at room temperature. Powder X-ray diffraction and infrared spectroscopy were used to characterize the products. The morphology of the product was determined by transmission electron microscopy. The photoluminescence property of as-prepared CdS/polyacrylonitrile nanocomposites was also studied.
Single-step synthesis of nanocrystalline CdS/polyacrylamide composites by γ-irradiation

Zhengping Qiao,Yi Xie,Gang Li,Yingjie Zhu,Yitai Qian

DOI: https://doi.org/10.1023/A:1004780830966

IF: 4.5

2000-01-01

Journal of Materials Science

Abstract:γ-Irradiation has been used to prepare nanocrystalline composites—CdS/polyacrylamide with 18 wt % cadmium sulfide at room temperature, in which the inorganic phase displays uniformity of size and nearly uniform dispersion. The formation of nanocrystalline CdS and the polymerization of acrylamide are in a single step. X-ray Powder Diffraction and Infrared Spectra were used to characterize the product. Its morphology was determined by Transmission Electron Microscopy.
Fabrication and Characterization of Au-Polyacr ylamide Nanocomposites by a Convenient Ultraviolet Irradiation Technique

郝凌云,朱玉瑞,周勇,胡源,陈祖耀

DOI: https://doi.org/10.3969/j.issn.0253-2778.2001.01.020

2001-01-01

Journal of University of Science and Technology of China

Abstract:The Au-Polyacrylamide(PAM) nanocomposites with gold nanoparticleswell homogeneously dispersed in the polymer matrix have been prepa redvia a convenient ultraviolet irradiation technique at room temperature. The mechanism is based on the simultaneous occurrence of photo-reduction of HAuCl 4 and the polymerization of acrylamide monomer. It was found that the formation of colloid Au particles was favorable for the polymerization of acrylamide monomer while the polymerization of acrylamide could efficiently protect the growth and aggregation of colloidal Au particles. Further study indicates that the size of Au nanoparticles of Au-PAM did not increase according to the UV irradiation time but was affected by the prime concentration of HAuCl4.This method may find a wide application in the to preparation of other metal-polymer nanocompo sites.
Characterization and Synthesis Mechanism of Nanosilver/PAMPS Composites by Microwave

Guocai Xu,Shengtao Gao,Xiaoli Ji,Xiaomei Zhang

DOI: https://doi.org/10.4236/snl.2014.42003

2014-01-01

Soft Nanoscience Letters

Abstract:Nanosilver/Poly(2-acrylamido-2-methylpropanesulfonate sodium (AMPS)) composites were synthesized with sliver nitrate solution containing AMPS monomer in situ by microwave radiation without addition of any reducer.The composites were characterized by means of UV-Vis, XRD, FTIR, TEM and XPS respectively.The results show that silver nanoparticles are dispersed highly and homogeneously in PAMPS matrix and possessed face-centered cubic structure.The morphology of nanosilver particles is not affected by microwave treatment and AMPS polymerization.XPS analysis reveals that there is an interaction among silver nanoparticles with nitrogen atoms and carbonyl oxygen atoms from AMPS polymer.Thermoanalysis proves that thermal stability of the PAMPS nanocomposites is decreasing with silver nanoparticles dispersed in the composites.The mechanism of silver ion reduced to nanosilver particles catalysized by PAMPS under microwave is discussed.
X-ray irradiation-induced changes in (PVA–PEG–Ag) polymer nanocomposites films

S.A. Nouh,K. Benthami,M.M. Abutalib

DOI: https://doi.org/10.1080/10420150.2016.1155580

2016-02-01

Radiation Effects and Defects in Solids

Abstract:The effects of X-ray irradiation on the structural, thermal and optical properties of polyvinyl alcohol–polyethylene glycol–silver (PVA–PEG–Ag) nanocomposites have been investigated. The samples of nanocomposites were prepared by adding Ag nanoparticles with 5 wt% to the (PVA–PEG) blend. The films of 0.05 mm thickness were prepared by the casting method. These films were irradiated with X-ray doses ranging from 20 to 200 kGy. The resultant effect of X-ray irradiation on the structural properties of PVA–PEG–Ag has been investigated using X-ray diffraction and Fourier transform infrared spectroscopy. Also, thermal property studies were carried out using thermogravimetric analysis. Further, the transmission of the PVA–PEG–Ag samples and any color changes were studied. Fourier transform infrared spectroscopy measurements showed that the crosslinking is the dominant mechanism at the dose range 50–200 kGy. This led to a more compact structure of PVA–PEG–Ag samples, which resulted in an improvement in its thermal stability with an increase in the activation energy of thermal decomposition. Moreover, the color intensity ΔE was greatly increased with an increase in the dose, and was accompanied by a significant increase in the yellow color component.

physics, condensed matter, fluids & plasmas,nuclear science & technology
Preparation of high-stable silver nanoparticle dispersion by using sodium alginate as a stabilizer under gamma radiation

Yusheng Liu,Shimou Chen,Lei Zhong,Guozhong Wu

DOI: https://doi.org/10.1016/j.radphyschem.2009.01.003

IF: 2.776

2009-01-01

Radiation Physics and Chemistry

Abstract:Highly stable silver nanoparticles were successfully synthesized by gamma ray irradiation in the presence of sodium alginate. The silver nanoparticles were characterized by UV–vis spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). Their particle sizes were in the range of 6–30nm. The as-obtained Ag nanoparticle dispersion was stable for over 6 months at room temperature.
Impact the silver nanoparticles on properties of new fabricated polyvinyl alcohol- polyacrylamide- polyacrylic acid nanocomposites films for optoelectronics and radiation pollution applications

Abdali, Karar

DOI: https://doi.org/10.1007/s10965-023-03514-y

IF: 3.061

2023-03-19

Journal of Polymer Research

Abstract:The impact of silver nanoparticles (AgNPs) loading on the structure, optical, morphology, and dielectric features of polyvinyl alcohol 70% -polyacrylamide- polyacrylic acid 10% (PVA 70% -PAAm 20% -PAA 10% ) (viz., PPP 1- x Ag x , where x = 0.00, 0.03, 0.06, and 0.08) was studied systematically and created via the solution-casting route. X-ray diffraction (XRD) data analysis affirmed the semicrystalline nature of all the produced films. The crystallite size was enhanced upon embedding. Fourier-transform infrared spectroscopy (FTIR) spectra confirmed the charge transfer and interaction between the AgNPs and PPP. The spatial distribution of AgNPs revealed the fine dispersion and permeation of nanoclusters throughout the PPP matrix. The matrix's absorbance spectra (%A) revealed a band at 200 nm with the absorption of 0.8% that enhanced to 1% while loading caused a redshift toward high wavelengths. The indirect bandgap observed from the Tauc model for PPP is 3.8 eV, notably improved to (3.2 → 2.8 eV) with the loading of AgNPs raised from 0.03 to 0.08 in PPP 1- x Ag x composites, respectively. The frequency-dependence ( f- dependence) of the electron transfer features was measured, and the results elucidated enhanced dielectric behavior upon loading nanoparticles from less than 1 to 5 × 10 –4 . Interestingly, at a high AgNPs content ( x = 0.08), the attenuation coefficient (α) of the Cs 137 /662 keV source significantly increased (~ 80%), significantly improved from 2.2 of blend polymers to 3.8 cm −1 for the higher loading ratio of AgNPs. Moreover, with increasing penetration depth (PD) and thickness, the buildup factor (BF) increased. Thus, the produced films are promising for many applications in optoelectronics and radiation pollution.

polymer science
In Situ Controlled Synthesis of Thermosensitive Poly(N-Isopropylacrylamide)/Au Nanocomposite Hydrogels by Gamma Radiation for Catalytic Application

Chun-Hua Zhu,Zi-Bin Hai,Chun-Hua Cui,Hui-Hui Li,Jia-Fu Chen,Shu-Hong Yu

DOI: https://doi.org/10.1002/smll.201102060

IF: 13.3

2012-01-01

Small

Abstract:Thermosensitive poly(N-isopropylacrylamide) (PNIPAM)/Au nanoparticle (NP) nanocomposite hydrogels are synthesized by in situ ?-radiation-assisted polymerization of N-isopropylacrylamide monomer aqueous solution in the presence of HAuCl4.4H2O. In this reaction, the PNIPAM hydrogels and the Au NPs are formed simultaneously, thus demonstrating an easy and straightforward synthetic strategy for the preparation of a uniform nanocomposite. The results suggest that increasing the monomer content during the preparation of nanocomposite materials can increase the sizes of Au NPs. The effects of irradiation dose and concentration of HAuCl4.4H2O on the optical and thermal properties of the hydrogel are also investigated. The PNIPAM/Au nanocomposite hydrogels act as an excellent catalyst for the conversion of o-nitroaniline to 1,2-benzenediamine, and the catalytic activity of the composite hydrogel can be tuned by the volume transition of PNIPAM. The in situ polymerization of monomer and reduction of metal ions initiated by a clean and green ?-radiation technique can be extended to the efficient synthesis of other nanocomposite materials.
Characterization and Morphology of Composites Prepared from Polyacrylonitrile and Silver Nitrate

Yan Chen,Hongyan Liu,Zhaojun Zhang

DOI: https://doi.org/10.4028/www.scientific.net/amm.26-28.159

2010-01-01

Applied Mechanics and Materials

Abstract:Polyacrylonitrile (PAN)/silver (Ag) nanoparticle composites were prepared via heat treatment of composite solutions of silver nitrate (AgNO3) and PAN in N, N-dimethylformamide (DMF). The resultant composites were characterized by infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and Thermo gravimetric analyses (TGA). TGA results showed that the PAN/Ag composite are thermally more stable than the corresponding neat PAN. XRD results showed that pure phase Ag was obtained in the prepared nanocomposites. They also showed that crystallinity of PAN was largely decreased after the composition with nano-sized Ag. TEM results showed that the Ag particles were in sphere shape with 30-60nm diameter in the as-prepared nanocomposites.
Thermoresponsive Polymer-Stabilized Silver Nanoparticles

Limin Guo,Jingjing Nie,Binyang Du,Zhangquan Peng,Bemd Tesche,Karl Kleinermanns

DOI: https://doi.org/10.1016/j.jcis.2007.11.022

IF: 9.9

2008-01-01

Journal of Colloid and Interface Science

Abstract:Silver nanoparticles (Ag NPs) stabilized by a thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAM), have been synthesized by the reduction of silver ions with NaBH4 in aqueous solutions. The obtained Ag NPs are very stable at room temperature due to the extended coil conformation of the PNIPAM chain at temperatures below its volume phase transition temperature (similar to 32 degrees C). At higher temperatures (such as 45 degrees C) above the phase transition of PNIPAM, only minute aggregation between Ag NPs was observed, showing that the collapsed PNIPAM chains still retain the ability to stabilize Ag NPs. The PNIPAM-stabilized Ag NPs were then characterized as a function of the thermal phase transition of PNIPAM by UV-vis spectroscopy, dynamic light scattering, transmission electron microscopy, and cyclic voltammeter. Consistent results were obtained showing that the phase transition of PNIPAM has some effect on the optical properties of Ag NPs. Switchable electrochemical response of the PNIPAM-stabilized Ag NPs triggered by temperature change was observed. (c) 2007 Elsevier Inc. All rights reserved.
Radiation synthesis of polymer/clay nanocomposite hydrogels with high mechanical strength

Ma Rong-Fang,Yuan Jie,Li Can-Can,Peng Jing,Dung Zhen,Xu Ling,Li Jiu-Qiang,Zhai Mao-Lin

2014-01-01

Nuclear Science and Techniques

Abstract:Poor mechanical properties of PNIPAAm hydrogels have limited their applications. Nanocomposite hydrogels (NC gels) which incorporate inorganic clay possess high mechanical strength and other desirable properties. In this paper, we report a facile approach to synthesize NC gels using radiation technique. With exfoliated clay sheets acting as crosslinkers, N-isopropylacrylamide monomers are polymerized and crosslinked to form NC gels under gamma-irradiation at room temperature. Apart from regular swelling behavior and interesting performance in therm sensitivity, the radiation synthesized NC gel (RNC gel) has good optical transparency, high strength and flexibility. Through Micro-FTIR, XPS and TG analyses, a particular chemically crosslinked organic/inorganic network was identified in the RNC gel.
Crystal Structural, Morphological and Gamma Ray Shielding (γ-S) Efficiency of PVA/PAAm/PAA Polymer Blend Loaded With Silver Nanoparticles via Casting Method

Karar Abdali

DOI: https://doi.org/10.21203/rs.3.rs-1050050/v1

2021-11-11

Abstract:Abstract Cost, weightiness, vacuum, and absorption power of the matters applied for radiological preservation are significant points which challenge scientists and researchers to preparation and improve suitable γ-S materials. A perfect γ-S is one which can absorb, attenuate, or prevent the ultimate part of incident γ-radiation. The major purpose of this study is to evaluation the effect of silver nanoparticles (AgNPs) additions on the γ-S characteristics of polyvinyl alcohol PVA, polyacrylamide PAAm and polyacrylic acid PAA polymeric blend (PB). In the current research, PVA/PAAm/PAA (70:20:10) wt./wt.% matrix PB with 0, 0.03, 0.06 and 0.08 wt% of AgNPs were synthesized via Petri dish casting technique as a polymer nanocomposites (PNCs). The specimen were categorized as h0,h1,h2 and h3 depending on the addition of AgNPs. Crystal structure involves X-ray diffraction (X-ray), the Fourier transformation infrared spectrum (FT-IR), ultraviolet-visible light spectrum (UV-V) and optical microscopy (OPM) were studied. The coefficients of attenuation were also computed utilizing caesium (Cs 137 ) source. Results showed which increasing of AgNPs from 0% to 0.08% leads to increasing in the attenuation coefficient values and decreasing the ratio of radiation counts (N/No), also 0.08% of AgNPs loaded is the essential optimum consist of this additive. The γ-S properties conducted using γ-rays has explained which PNCs with 8% of AgNPs and only 0.090 cm thickness, can attenuate 80% of the γ- ray.
Preferential Facet of Nanocrystalline Silver Embedded in Polyethylene Oxide Nanocomposite and Its Antibiotic Behaviors

Qiang Chen,Lei Yue,Feiyan Xie,Meili Zhou,Yabo Fu,Yuefei Zhang,Jing Weng

DOI: https://doi.org/10.1021/jp800306c

2008-01-01

Abstract:In this article, a magnetron sputtering (MS) method is reported to prepare a nanocomposite of embedded silver nanoparticles in simultaneously polymerized, nonfouling polyethylene oxide (PEO) film. X-ray diffraction (XRD) shows that the silver nanoparticles had tunable growth in the preferential (111) facet, and transmission electron microscopy (TEM) reveals that diameters of silver could also be controllable in the range of 5-10 nm by varying the processing parameters, such as the working pressure and the target-to-substrate distance. The antibacterial activities tests demonstrate that nanocrystalline silver in the Ag/PEO composite fabricated by this method has a markedly efficient effect.

Γ-Radiation Synthesis and Characterization of Polyacrylamide–silver Nanocomposites

Preparation Of Uniformly Dispersed N-Isopropylacrylamide/Acrylic Acid/Nanosilver Composite Hydrogel And Its Anti-Mold Properties

A Convenient Ultraviolet Irradiation Technique For Fabrication Of Silver-Polymer Nanocomposites

Synthesis of PbS/poly(vinyl Acetate) Nanocomposites by Γ-Irradiation

Synthesis of Nanosilver/Pmma Composites Via Ultrasonically Bi-In Situ Emulsion Polymerization

Synthesis of PbS/polyacrylonitrile Nanocomposites at Room Temperature by Γ-Irradiation

Single-Step Synthesis Of Nanocrystalline Cds/Polyacrylamide Composites By Gamma-Irradiation

A Novel in Situ Ultraviolet Irradiation Polymerization–Photolysis Technique for Fabrication of Polyacrylamide-MS (M = Cd, Pb, Zn) Nanocomposites at Room Temperature

Synthesis of CdS/polyacrylonitrile nanocomposites by γ-irradiation

Single-step synthesis of nanocrystalline CdS/polyacrylamide composites by γ-irradiation

Fabrication and Characterization of Au-Polyacr ylamide Nanocomposites by a Convenient Ultraviolet Irradiation Technique

Characterization and Synthesis Mechanism of Nanosilver/PAMPS Composites by Microwave

X-ray irradiation-induced changes in (PVA–PEG–Ag) polymer nanocomposites films

Preparation of high-stable silver nanoparticle dispersion by using sodium alginate as a stabilizer under gamma radiation

Impact the silver nanoparticles on properties of new fabricated polyvinyl alcohol- polyacrylamide- polyacrylic acid nanocomposites films for optoelectronics and radiation pollution applications

In Situ Controlled Synthesis of Thermosensitive Poly(N-Isopropylacrylamide)/Au Nanocomposite Hydrogels by Gamma Radiation for Catalytic Application

Characterization and Morphology of Composites Prepared from Polyacrylonitrile and Silver Nitrate

Thermoresponsive Polymer-Stabilized Silver Nanoparticles

Radiation synthesis of polymer/clay nanocomposite hydrogels with high mechanical strength

Crystal Structural, Morphological and Gamma Ray Shielding (γ-S) Efficiency of PVA/PAAm/PAA Polymer Blend Loaded With Silver Nanoparticles via Casting Method

Preferential Facet of Nanocrystalline Silver Embedded in Polyethylene Oxide Nanocomposite and Its Antibiotic Behaviors