Abstract:In our previous works, we presented a zoom system and image stabilization design based on deformable mirrors (DMs). According to the high bandwidth and free edge characteristics of the piezoelectric deformable mirror (PDM), we tested the system's image-stable capability. We found the PDM could realize some tilt displacements while keeping a certain stable surface shape, it could obtain higher image stabilizing precision when integrated with the traditional mechanical image stabilization systems. In the design of the image stabilization system, the PDM's tilt displacement range is a key factor for consideration. So in this paper, we carried out a tilt displacement range testing experiment by using the OKO's 37-channel PDM. We measured and analyzed the variation of the tilt displacements in optical image stabilization process, and calculated the maximum tilt angle as the PDM surface shape was stabilized. We built an experimental platform consisting of a fixed target, an imaging system based on PDM, and a CCD camera. We used the ZYGO interferometer as an evaluation instrument to measure the surface shape stability. When the PDM surface had a tilt displacement, the image point of the fixed target on the camera sensor shifted correspondingly. The tilt angle of the PDM could be obtained by calculating this shift. The results showed that the maximum tilt angle of the PDM was 0.2mrad. The paper also analyzed the experiment errors when concerning about the off-axis error of the PDM deflection center.

Study on Application of Flexible Hinge Micro-Displacement Mechanism in Tunable F-P Filters

Study of the Tuning Performance of Tunable Liquid Crystal Filter

Tunable F-P Optical Filter Based on Micro-Cavity Structure

Study of tunable Fabry-Perot filter based on piezoelectric polymer film

Analysis on the tunable optical properties of MOEMS filter based on Fabry–Perot Cavity

Design and Control of a Piezoelectric Ceramic-actuated and Flexure Hinge-based Micromanipulator

Study on Step Magnifying Mechanism of Precise Planar Micro-Positioner

The Effects of Reflection Phase Shift on the Optical Properties of a Micro-Opto-electro-mechanical System Fabry–Perot Tunable Filter

Reconfigurable Microwave Photonic Transversal Filter Using a Variable Gain Tilt Filter

Four‐tap Microwave Photonic Filter with Tunable Center Frequency and Reconfigurable Transfer Function

Analysis and optimal design a new flexible hinge displacement amplifier mechanism by using Finite element analysis based on Taguchi method

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Design of a Tunable Resonant Micromirror

Tunable Optical Thin Film Filter Array Based on the Microstructure Technique

Tunable Acoustic Filters Assisted by Coupling Vibrations of a Flexible Helmholtz Resonator and a Waveguide

Design Of Single-Dof Micro-Displacement Flexure Hinge Mechanism Actuated By Pzt

A Silicon-based Scanning Micromirror Actuated by Piezoelectric Cantilevers Using PZT

A General Method for Implementing Flexible Filter Design Based on Nested Substrate Integrated Waveguide Circular Cavity and Cambered Cavity

Tilt Displacement Range Testing for a Piezoelectric Deformable Mirror

Tunable flexural waves by piezoelectric metasurface with shunt circuits

Mechanism Study of Mechanical Tuning in HTS Filter Application