Abstract:The control and removal of inclusions in the continuous casting process can significantly improve the performance of casting billet. In this paper, the aluminum alloy rod billets were prepared by the self-developed negative pressure continuous casting (NPCC) technique. The three-dimensional (3D) morphology and distribution of inclusions in the rod billet were analyzed by X-ray microtomography, the inclusions motion behavior was systematically studied by numerical simulation, and the inclusions removal mechanism was comprehensively revealed. The results show the volume fraction of inclusions in the aluminum alloy rod billet prepared by NPCC technique is 0.03%. Compared with the traditional vertical downward continuous casting (VDCC) technique, the inclusions are reduced by 81.3% and the maximum equivalent diameter is reduced from 24 to 13 μm. By changing the pressure difference inside and outside the melt (PDIOM), NPCC technique makes the melt and inclusions flow in the same direction, which accelerates the floating of inclusions to the melt surface to achieve dynamic solid–liquid separation. Simultaneously, the PDIOM increases the turbulent kinetic energy dissipation rate of melt by a maximum of 44.3 times, and the collision constant of inclusion particles increases by a maximum of 6.7 times. The inclusion particles are more likely to collision and aggregation, which is conducive to the floating and removal of inclusions, thereby further reducing the content and size of inclusions in the rod billet. Overall, this study provides a new continuous casting technique for the preparation of high-quality metal billet with low inclusions content and size.

Performance of Electromagnetic Purification System in Continuous Twin Roll Casting of Aluminum Sheet

Effect of Electromagnetic Power on the Microstructure and Properties of 2219 Aluminum Alloy in Electromagnetic Continuous Casting Technology

Research on Online Monitoring Technology and Filtration Process of Inclusions in Aluminum Melt

Application of electromagnetic metallurgy in continuous casting: A review

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Theory and Experimental Study on Purifying Emulsion Using Electromagnetic Technique

Influence of Electromagnetic Swirling Flow in Nozzle on Solidification Structure and Macrosegregation of Continuous Casting Square Billet

Experimental Study of Macrostructure and Segregation by a Novel Electromagnetic Nozzle Swirling Flow Combined with Electromagnetic Stirring in Continuous Casting

A review of electromagnetic stirring on solidification characteristics of molten metal in continuous casting

Separation of Non-Metallic Inclusions from High Strength Low Alloy Steel by Electromagnetic Stirring

Numerical and Experimental Study on Carbon Segregation in Square Billet Continuous Casting with M-EMS

Study on the synergistic effect of electromagnetic stirring and mechanical reduction on the improvement of the internal homogeneity of high-carbon steel billet

Recent advances and future trend of aluminum alloy melt purification: A review

Improving Inner Quality in Continuous Casting Rectangular Billets: Comparison Between Mechanical Soft Reduction and Final Electromagnetic Stirring

Numerical Simulation of Solidification Process in an SCR Wheel and Belt Continuous Caster

The simultaneous application of variable frequency ultrasonic and low frequency electromagnetic fields in semi continuous casting of AZ80 magnesium alloy

Effect of Low-Frequency Electromagnetic Casting on Micro-Structure and Macro-Segregation of 5A90 Alloy Ingots

An Online Monitoring System for In Situ and Real-Time Analyzing of Inclusions within the Molten Metal

Effect of mold electromagnetic stirring on metallurgical behavior in ultrahigh speed continuous casting billet mold

Numerical and Experimental Study on the Direct Chill Casting of Large-Scale AA2219 Billets via Annular Coupled Electromagnetic Field

Motion behavior and removal mechanism of inclusions during negative pressure continuous casting process