Motion behavior and removal mechanism of inclusions during negative pressure continuous casting process

Qinan Ba,Xuefeng Liu,Yaohua Yang,Wenjing Wang
DOI: https://doi.org/10.1007/s10853-022-07950-x
IF: 4.5
2022-11-14
Journal of Materials Science
Abstract:The control and removal of inclusions in the continuous casting process can significantly improve the performance of casting billet. In this paper, the aluminum alloy rod billets were prepared by the self-developed negative pressure continuous casting (NPCC) technique. The three-dimensional (3D) morphology and distribution of inclusions in the rod billet were analyzed by X-ray microtomography, the inclusions motion behavior was systematically studied by numerical simulation, and the inclusions removal mechanism was comprehensively revealed. The results show the volume fraction of inclusions in the aluminum alloy rod billet prepared by NPCC technique is 0.03%. Compared with the traditional vertical downward continuous casting (VDCC) technique, the inclusions are reduced by 81.3% and the maximum equivalent diameter is reduced from 24 to 13 μm. By changing the pressure difference inside and outside the melt (PDIOM), NPCC technique makes the melt and inclusions flow in the same direction, which accelerates the floating of inclusions to the melt surface to achieve dynamic solid–liquid separation. Simultaneously, the PDIOM increases the turbulent kinetic energy dissipation rate of melt by a maximum of 44.3 times, and the collision constant of inclusion particles increases by a maximum of 6.7 times. The inclusion particles are more likely to collision and aggregation, which is conducive to the floating and removal of inclusions, thereby further reducing the content and size of inclusions in the rod billet. Overall, this study provides a new continuous casting technique for the preparation of high-quality metal billet with low inclusions content and size.
materials science, multidisciplinary
What problem does this paper attempt to address?