Abstract:Methanol is a potential alternative fuel for heavy-duty engines to effectively reduce carbon emissions. On the other hand, unregulated emissions from methanol-fueled engines are harmful to the environment. The formaldehyde emission mechanism was investigated in this paper using a premixed laminar combustion experiment and a plug flow reactor (PFR) simulation with a detailed mechanism. Furthermore, the engine test was carried out on a heavy-duty spark ignition (SI) pure methanol engine with EGR to study the effects of the injection strategy, exhaust gas recirculation ratio (EGR), engine load, and speed on unregulated emissions. The high-pressure loop EGR system and port fuel injection system were adopted. Unregulated emissions were measured using a GC-2010 gas chromatography analyzer with a pulsed discharge helium ionization detector (PDHID) and Gs-OxyPLOT. Formaldehyde emission is the post-oxidation production of unburned methanol, according to the experiment and simulation, and it increases first, then decreases as the temperature rises. Unregulated emissions mainly consist of methanol and formaldehyde. The injection timing can be divided into two groups: 120 degrees CA to 300 degrees CA and 360 degrees CA to 780 degrees CA, where 0 degrees CA represents fire TDC. The BTE at alpha(inj) of 120 degrees CA to 300 degrees CA is lower than that at other alpha(inj), while methanol and formaldehyde emissions are the opposite. The temperature of unburned methanol post-oxidation is affected by engine speed, load, and EGR ratio, affecting methanol and formaldehyde emissions. The higher exhaust temperature caused by the higher engine speed, load and a lower EGR ratio can reduce methanol emissions. The nonmonotonic trends of formaldehyde emission with the EGR ratio and the different influences of EGR on the formaldehyde emission under different engine loads are the result of the nonmonotonic relationship between formaldehyde emission and temperature. The engine experiment results are consistent with the PFR simulation.

Experimental Research on Pollutant Emission from a DME HCCI Engine

Experimental Investigation of DME HCCI Engine Emissions

Regulated And Nonregulated Emissions From A Dimethyl Ether Powered Compression Ignition Engine

Experimental Investigation on Combustion Characteristics of DME HCCI Engine

Evaluation on the Effects of Compression Ratio, CO2 and LPG on HCCI Combustion Fueled with DME

Investigation on the regulated and unregulated emissions of a DME engine under different injection timing

Study on HCCI Combustion Fueled with DME

Experimental study on exhaust emissions from a multi-cylinder DME engine operating with EGR and oxidation catalyst

Direct Measurement of Formaldehyde and Methanol Emissions from Gasohol Engine Via Pulsed Discharge Helium Ionization Detector

Study of DME HCCI Engine Emission Characteristic with Different Compression Ratios

An Investigation on Combustion and Exhaust Emissions of Direct Injection Diesel Engine Fuelled with Dimethyl Ether

Evaluation on Effects of Compression Ratio on DME HCCI Combustion Experiments

Effects of Compression Ratio and CO2 on the Process of HCCI Combustion Fueled with DME

Study of HCCI-DI combustion and emissions in a DME engine

Investigation on Performance and Emission Characteristics of QHCCI DME Engine

Combustion and Emission Control in DME Engine Using Internal-External Exhaust Gas Recirculation

Comprehensive Study on Unregulated Emissions of Heavy-Duty SI Pure Methanol Engine with EGR

Investigation on formaldehyde generation characteristics and influencing factors of PODE/methanol dual-fuel combustion mode

Study of dimethyl ether homogeneous charge compression ignition combustion process using a multi-dimensional computational fluid dynamics model

Combustion and Emission Characteristics of a Homogeneous Charge Compression Ignition Engine

Investigation on Emission Characteristics of A Compression Ignition Engine with Oxygenated Fuels and Exhaust Gas Recirculation