Abstract:Zinc oxide has been of interest because of its efficient redox capacity in the UV spectral region. However, the high bandwidth limits its application in the visible region. Although synthesizing heterojunctions and doping with other elements have become the focus of the problem, it inevitably has an impact on the environment. In contrast, the template method is not only environmentally friendly but also can be used to increase the degradation rate by changing the nanoparticle mesoporous structure. Microporous/mesoporous zinc oxide with multi-level structure was synthesized using anhydrous ethanol as a green templating agent in a mild and energy-efficient method. The prepared nZnO was characterized using XRD, SEM, BET, and HR-TEM. XRD confirmed that the formation of hexagonal wurtzite zincite nZnO with good crystallinity. SEM results showed that the products were flower-like structures composed of nanosheets with a thickness of 20 nm and an average diameter of 400 nm. TEM and BET confirmed the presence of pits with diameters ranging from about 1 nm to 20 nm existed on the surface of the nanosheets, while the specific surface area of 28.05 m 2 /g and the pore volume of 0.069 cm 3 /g also provide advantages for nZnO as a photocatalytic material. The synthesized nZnO overcame the disadvantage of responding only in the UV region, and the photocatalytic degradation efficiency of MB reached 93.2% after 60 min of xenon lamp irradiation, and stabilized at 86.15% after five photocycling tests. Compared with other kinds of templates, anhydrous ethanol has the advantages of environmental friendliness and simple post-processing, and it also provides ideas for the synthesis of multilevel structures of other nanomaterials.

Synthesizing nanocrystal-assembled mesoporous magnesium oxide using cotton fibres as exotemplate

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Preparation of Al2O3-MgO Acid/Base Bifunctional Material with High Specific Surface Area Using Degreasing Cotton As Exotemplate

Preparation of Al_2O_3-MgO Acid/Base Bifunctional Material with High Specific Surface Area Using Degreasing Cotton as Exotemplate

Recycle of Cotton Waste by Hard Templating with Magnesium Acetate As MgO Precursor.

Preparation of hollow MgO nanosorbents via the templating method and study of their adsorption mechanism

A Facile Cotton Biotemplate to Fabricate Porous Znfe2o4 Sheets for Acetone Gas Sensing Application

MgCO 3·3H 2O and MgO complex nanostructures: Controllable biomimetic fabrication and physical chemical properties

Preparation of Shaped Magnesium Oxide/carbon Catalysts Using Rice Grains As an Exotemplate and Carbon Precursor

In Situ Synthesis of Ordered Mesoporous Silica Materials Embedded in Cotton Fiber and Their Co2 Capture Properties

Synthesis and Morphological Control of Mesoporous Sio2 with Cotton As Bio-Template

TEMPLATE-INDUCED MORPHOLOGICAL PRESERVATION AND SELF-ASSEMBLY OF NONPOROUS MGO NANOSTRUCTURES DURING THE DECOMPOSITION OF NANOSCALE MG(OH)2 PRECURSORS

Crosslinking Ionic Oligomers Sol-Gel Synthesis of High-Surface-area Mesoporous Magnesium Carbonate and Its General Applicability

Construction of Shape‐Controlled MgO Microstructures by Natural Bischofite for Cost‐Efficient Dye Adsorption

Synthesis and characterization of magnesium oxide supported catalysts with a meso-macropore structure

Ethanol templated synthesis of microporous/mesoporous nanozinc oxide with multi-level structure and its outstanding photo-catalytic properties

Nanoscale magnesium hydroxide and magnesium oxide powders: Control over size, shape, and structure via hydrothermal synthesis

Synthesis And Characterization Of Porous Magnesium Hydroxide And Oxide Nanoplates

Preparation of MgO Nanosheets with Polar (111) Surfaces by Ligand Exchange and Esterification – Synthesis, Structure, and Application As Catalyst Support

Controlled Synthesis Of Magnesium Hydroxide Nanoparticles With Different Morphological Structures And Related Properties In Flame Retardant Ethylene-Vinyl Acetate Blends

Biotemplate fabrication of SnO 2 nanotubular materials by a sonochemical method for gas sensors