Abstract:The low-temperature alkali/urea aqueous system has received wide public attention since it is a better method to reduce pollution by preparing the regenerated cellulose fiber through the green dissolution system. Since molecular weight has a significant impact on the solubility and mechanical property of regenerated cellulose fiber; thus, we designed this experiment that cellulose materials with molecular weight ranging between 6.8 × 104 to 13.5 × 104 were employed for wet-spinning in alkali/urea aqueous system. It is found that as molecular weight of cellulose increases, cellulose solution decreases in solubility but cellulose molecular chain aggregates increase. However, bath the stability and viscosity of cellulose solutions almost remain unchanged with the change of molecular weight. As for the spun fibers, it is found that the orientation and crystallinity are relatively high when the molecular weight is low (6.8×104 – 9 × 104). These are excellent mechanical properties However, unlike conventional polymers, when molecular weight further increases to 9×104 – 13.5×104, the degree of orientation and crystallinity gradually decreases. This is due to a large number of entanglements between adjacent molecular chains, thereby hindering the molecular chain orientation along with reduced mechanical property. Our work demonstrates that the considerable molecular weight of cellulose is neither good for dissolution nor spun fibers' mechanical property. The choice of cellulose with relatively low molecular weight is essential not only for the excellent dissolution but also for fiber property.

Effects of Temperature and Molecular Weight on Dissolution of Cellulose in NaOH/urea Aqueous Solution

Solubility of Cellulose in NaOH/Urea Aqueous Solution

Dissolution of cellulose from different sources in an NaOH/urea aqueous system at low temperature

The Kinetics Of Cellulose Dissolution In Sodium Hydroxide Solution At Low Temperatures

Role of Sodium Zincate on Cellulose Dissolution in NaOH/urea Aqueous Solution at Low Temperature

Effect of the Dissolving Method on the Dissolution of Dissolving Pulp Cellulose Fibers with Different Dried-States in Different NaOH/Additives Aqueous Solutions

The thermodynamics study on the dissolution mechanism of cellobiose in NaOH/urea aqueous solution

The Dissolution of Cellulose in NaOH-based Aqueous System by Two-Step Process

MICRO-CELLULOSE PREPARATION METHOD BASED ON UREA/NaOH DISSOLVED SYSTEM

The effect of cellulose molecular weight on internal structure and properties of regenerated cellulose fibers as spun from the alkali/urea aqueous system

Effects of additives on dissolution of cellobiose in aqueous solvents

Dissolution of cellulose in aqueous NaOH/urea solution: role of urea

Elucidation of the Relationship between Intrinsic Viscosity and Molecular Weight of Cellulose Dissolved in Tetra-N-Butyl Ammonium Hydroxide/Dimethyl Sulfoxide

Participation of sodium sulfamate as hydrogen bond-donating and hydrogen bond-accepting additive in the dissolution of cellulose in NaOH aqueous solution

Effect of hemicellulose content on the solution properties of cellulose carbamates in NaOH/ZnO aqueous system

Study of Cellulose Dissolution in ZnO/NaOH/Water Solvent Solution and Its Temperature-Dependent Effect Using Molecular Dynamics Simulation

Comparison of Cellulose Dissolution Behavior by Alkaline and Sulfuric Acid Solvents and Their Films’ Physical Properties

The Thermodynamics of Enhanced Dope Stability of Cellulose Solution in NaOH Solution by Urea.

Quantitative NMR investigation on the low-temperature dissolution mechanism of chitin in NaOH/urea aqueous solution

The influence of temperature on cellulose swelling at constant water density

Dissolution Of Cellulose In Zncl2 Aqueous Solution