Abstract:By employing carefully controlled processing methods, a large amount of porosity (>70vol%) was introduced in ceramic materials derived from preceramic polymers (silicone resins) after pyrolysis at 1000–1200°C in inert atmosphere. The resulting components have a bulk density ranging from ∼250 to 950kg/m3. Three main fabrication methods have here been employed: (1) direct foaming of a solution of a thermosetting silicone resin in a suitable solvent (with or without the addition of polyurethane precursors), acting also as a blowing agent; (2) the use of sacrificial fillers that decompose during pyrolysis, consisting in polymeric microbeads; (3) the mixing of preceramic polymers possessing different characteristics, in particular ceramic yield, depending on their molecular structure. In addition to that, several methods for developing micro- or meso-pores within the resulting SiOC macro-porous ceramics were explored, with the aim of fabricating components with hierarchical porosity. These include a controlled thermal treatment, the addition of fillers with a high specific surface area (SSA), the deposition of zeolites or meso-porous silica coatings, the infiltration with aerogels, selective etching of the SiOC material and the in situ formation of C-based nanostructures. Depending on the fabrication procedure adopted, cells with an average size ranging from the micrometer to the millimeter were obtained. All these processes are simple, economical and versatile, and large bodies with various shapes (tubes, plates, blocks) can be produced, possessing a wide range of morphologies and properties. Compression strength, flexural strength and Young's modulus vary with the morphology and density of the porous components. It is also possible to add to the preceramic polymers some filler powders, for instance possessing electrical conductivity or magnetic properties, leading to the production of functional cellular ceramics.

Factors Affecting the Pore Size in Porous Hydroxyapatite Produced by Stir-Froth-Polymerization Method

Factors affecting the microstructure of a fine ceramic foam

Study of Affecting Factors on Porosity in Gel-Casting Foam

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Effect of Type and Content of Pore-forming Agents on Properties of Porous Alumina Membrane Support

Study on porosity of porous ceramics stirring-formed by gelcasting foams

Preparation of Porous Hydroxyapatite Ceramics with Starch Additives

3D Printing of Hollow Microspheres into Strong Hierarchical Porous Ceramics

Characterization of Microstructure and Properties of Porous Ceramics Made by Extrusion

Additive manufacturing of interconnected hierarchically porous zirconia: Utilizing both microspherical and filamentary pore-forming agents via direct ink printing

Porous Silica Ceramics with Uniform Pores from the In-Situ Foaming Process of Silica Poly-Hollow Microspheres in Inert Atmosphere

Effects of the Particle Size on the Microstructures and Liquid Absorbency of Silica Porous Ceramics

Effect of holding time on the properties of porous ceramics with high-volume polished slag and its pore structure characteristics

A review of pore-forming agents on the structures, porosities, and mechanical properties of porous ceramics

In Vitro Cell Proliferation and Mechanical Behaviors Observed in Porous Zirconia Ceramics.

Control of Pore Size of the Bubble-Template Porous Carbonated Hydroxyapatite Microsphere by Adjustable Pressure

Fabrication and Mineralization of Poly (propylene Fumarate)/Hydroxyapatite Porous Hydrogels

Engineering porosity in polymer-derived ceramics

Porous Ceramic from Particle-Stabilised Foams Via Gelcasting

Effects of Foaming Agent Content on Structure and Properties of Porous Anorthite Ceramics

Robocasting of highly porous ceramics scaffolds with hierarchized porosity