Abstract:Homogeneous distribution of multi-walled carbon nanotubes (MWCNTs) in aluminum matrix composites and optimization of the MWCNTs-aluminum interfacial strength are challenging for MWCNTs/Al metal-matrix composites (MMCs). Here, in order to improve the wettability and the interfacial bonding between MWCNTs and aluminum matrix alloy, a uniform nickel layer was created on MWCNTs by electroless plating. Hybrid preforms comprising of aluminum borate whisker (ABOw) and MWCNTs with/without nickel coating were prepared. It was found that the presence of ABOw and nickel coating ensured the homogeneous distribution of MWCNTs in composites. The presence of the nickel coating on MWCNTs also helps in decreasing the porosity of composite prepared by squeeze casting technique. Compared with ABOw/2024Al and ABOw + MWCNTs/2024Al composites, improvements in elongation and hardness were obtained in the ABOw + MWCNTs(Ni)/2024Al composite, which may be attributed to the reduced porosity, increased interfacial bonding strength and the crack deflection induced by dispersed MWCNTs. However, the addition of MWCNTs did not change the main fracture mechanism: ABOw break and ABOw-aluminum interfacial de-bonding dominated the fracture process in ABOw and MWCNTs(Ni) reinforced composites.

Preparation of Novel Aluminum Hybrid Composite Containing Aluminum Borate Whiskers and Carbon Nanotubes

Mechanical properties of ABOw+MWNTs/Al hybrid composites made by squeeze cast technique

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting

An Aluminum Borate Whisker-Reinforced Aluminum Matrix Composite with High Plasticity

The properties and microstructure of hybrid composites reinforced with WO3 particles and Al18B4O33 whiskers by squeeze casting

Fabrication and Characteristics of (abow Plus Sicp)/6061al Composite by Semi-Solid Mechanical Stirring Technique

Multi-wall Carbon Nanotubes Reinforced Aluminum Composites Synthesized by Hot Press Sintering and Squeeze Casting

Preparation and Characterization of Hybrid Aluminum Matrix Composites Reinforced with MWCNT Using Powder Metallurgy Process

Synergistic Strengthening Effect of Graphene-Carbon Nanotube Hybrid Structure in Aluminum Matrix Composites

High strength-ductility synergy of MgAlB4 whisker reinforced aluminum matrix composites achieved by in situ synthesis

Microstructures and Tensile Properties of Hot-Extruded Composite Bi 2 O 3 -Coated ABOw/Al Composite

Microstructures and mechanical properties of Al nanocomposites hybrid-reinforced with B4C, carbon nanotubes and graphene nanoplatelets

Hybrid (Carbon Nanotube + Graphene Nanoplatelet)/AZ31 Composite with Simultaneously Enhanced Strength and Ductility

A damage-tolerant hybrid aluminum composite reinforced with carbon nanotube and zirconia: study of strengthening mechanisms by combined experiments and molecular dynamics simulations

Interfacial microstructure and tensile properties of 6061Al matrix composite reinforced with ZnAl2O4-coated Al18B4O33 whiskers

Well-Dispersed Carbon Nanotubes for Greatly Enhanced Mechanical Properties of Alumina-Based Composites

Microstructure and Tensile Properties of Al Hybrid Composites Reinforced with SiC Whiskers and SiC Nanoparticles

Hybrid Metal-Organic Frameworks/Carbon Fibers Reinforcements for Additively Manufactured Composites

Tensile Properties of an Aluminum Matrix Composite Reinforced by Sno2-Coated Al18b4o33 Whisker

Preparation and characterization of Al18B4O33 + BaPbO3/Al hybrid composite