Abstract:Calcium sulfite (CaSO3) oxidation is the key step in the resource utilization of flue gas desulfurization (FGD) ash waste. However, under natural conditions the oxidation rate of CaSO3 is very low, limiting its conversion into calcium sulfate, an acceptable product for construction material. This study was devoted to the investigation of the synthesis and performance of a bimetallic MOFs with potential catalytic activity, namely, Fe/Mn(BDC)(DMF,F) catalysts. A combination of techniques including SEM, EDS, XRD, FT-IR, etc. were used to characterize the catalysts. The excellent catalytic performance examined in a gas-liquid-solid three-phase oxidation system are due to the special flexible respiratory architecture and homogeneous distribution of active sites, which allows the reactants to fully contact with the catalyst. Mn incorporated in the backbone of the metal-organic framework significantly enriches the catalytic active species that participate in a radical chain reaction with activated SO3 2- as ·SO3 -, which in turn generates the key radical ·SO5 - that reacts with SO3 2- to form SO4 2-. In the presence of Fe/Mn(BDC)(DMF, F)-13, the oxidation ratio of CaSO3 could reach 90.71%, which is more than 30-fold compared to non-catalytic oxidation and almost 5 times the effects of the single metal Fe(BDC)(DMF, F) catalyst. In addition, the study of kinetics shows that the oxidation rate of Fe/Mn(BDC)(DMF,F)-13 can reach 0.042 mmol·L-1·s-1 with an apparent activation energy of 10.86 kJ/mol. The oxidation rate is mainly affected by reaction temperature, pH value, catalyst concentration, and air flow rate. This study provides a potentially sustainable way for utilization of CaSO3-containing desulfurization ash.

Study on catalytic oxidation of calcium sulfite in flue gas desulfurization process by using manganese sulfate

Study and optimization of catalytic oxidation technology in spent caustic desulfurization

Catalytic Oxidation of Calcium Sulfite in Solution/aqueous Slurry.

Mass Transfer and Kinetics Study on the Sulfite Forced Oxidation with Manganese Ion Catalyst

Mn -Catalyzed Oxidation Kinetics of Calcium Sulfite in Wet FGD Process

Sulfurou Acid Calcium Oxidated in the Wet Limestone-gypsum Flue Gas Desulfurization Process

Kinetic Study on Oxidation Process of Calcium Sulfite in Flue Gas Desulfurization Technology

Efficient calcium sulfite oxidation treatment by a highly active iron-manganese bimetallic metal-organic frameworks (MOFs)

Kinetics analysis of oxidation process of calcium sulfite in flue gas desulfurization technology

[Inhibition of Sulfite Oxidation Catalyzed by Heavy Metals in Dual Alkali Flue Gas Desulfurization Slurry].

Kinetics of the sulfite forced oxidation reaction with Co2+ and Mn2+ catalyst

Uncatalyzed Oxidation Process for Calcium Sulfite in Homogeneous/heterogeneous Systems

Decomposition Characteristics of Manganese Dithionate in Absorption Solution of Flue Gas Desulfurization and Denitration with Pyrolusite Slurry

A one step process for manganese leaching-desulfurisation of flue gas

Study on optimum technological conditions of ore sintering flue gas desulfurization by using poor manganese

Manganese leaching in high concentration flue gas desulfurization process with semi-oxidized manganese ore

Mechanistic and thermodynamic insights into the SO2 oxidation on MnO2 catalysts: A combined theoretical and experimental study

The Formation of Manganous Dithionate in the Manganese Oxide Flue Gas Desulfurization

Comparative Study of the Flue Gas Desulfurization Using Different‐Grade Natural Manganese Oxides

Removal and Resource Utilization of High Concentration Flue Gas Sulfur Dioxide Using Manganese Carbonate Ore

Study of oxidation of calcium sulfite in flue gas desulfurization by pore-type surface dielectric barrier discharge