Abstract:Density, surface tension, and viscosity of liquid electrical steels are measured at different temperatures, varying in silicon content between 3 and 6 mass%. Based on this, the density of the steel and the surface tension can be described as a function of temperature and silicon content with new models. For viscosity measurements, various methods are compared with models from the literature. Density, surface tension, and viscosity of various liquid electrical steels are measured at different temperatures, varying in their silicon content between 3 and 6 mass%. Density and surface tension are determined using the maximum bubble pressure method, while viscosity is investigated comparatively using a vibrating finger viscometer and an oscillating crucible viscometer. The results are compared with models known from the literature. Based on this, the density of the steel [ρ] = kg m−3 and the surface tension [σ] = N m−1 can be described as a function of temperature [θ] = °C and silicon content [Si] = mass% using the equations: ρ(θ,Si)=−1.28×θ−104.18×Si+9081.8, σ(θ,Si)=10−4×[ −0.00903×θ2−1.21494×Si2+29.268×θ−1.987×Si−22334 ]. There is a lack of experimental data in the literature for high‐temperature thermophysical properties for electrical steels. This underlines once again the novelty and significance of this study, as the determined thermophysical properties are essential for a wide range of applications. For instance, they are crucial in the production of metallic powders for additive manufacturing by atomization to adjust the properties of the powders precisely. The findings are also important for steelmaking itself, as the corrosion behavior of refractory material can be better determined.

Microstructure and magnetic properties of high silicon electrical steel produced by electron beam physical vapor deposition

Microstructure & Texture Evolution and Magnetic Properties of High Magnetic-Induction 6.5% Si Electrical Steel Thin Sheet Fabricated by A Specially Designed Rolling Route

Development of thin-gauge low iron loss non-oriented silicon steel

Characterization of microstructure, texture and magnetic properties in twin-roll casting high silicon non-oriented electrical steel

MA-SPS preparation technology and magnetic properties of high silicon electrical steel core

Microstructure, texture and magnetic properties of strip-cast 1.3% Si non-oriented electrical steels

Microstructure and texture evolution of thin-gauge non-oriented silicon steel with high permeability produced by twin-roll strip casting

Twin Roll Casting and Secondary Cooling of 6.0 wt.% Silicon Steel

Densities, Surface Tensions, and Viscosities of Molten High‐Silicon Electrical Steels with Different Silicon Contents

Thick-Gauge Ultra-High-Strength High-Silicon Non-Oriented Silicon Steel with Balanced Mechanical and Magnetic Properties Controlled by Partial Recrystallization Annealing

Effect of Si Gradient Pattern on the Microstructure and Properties of Laminated Electrical Steel Composites Prepared by Hot-Press Sintering

Development of Λ-Fiber Recrystallization Texture and Magnetic Property in Fe–6.5wt% Si Thin Sheet Produced by Strip Casting and Warm Rolling Method

Solidification Structure and Segregation of High Magnetic Induction Grain-Oriented Silicon Steel

Study on microstructure and texture of a new-type low Si high Mn non-oriented silicon steel 50W250

Influence of Silicon on Microstructure and Mechanical Properties of Fe-(4.5-7.0)%Si High-silicon Steel

Study on the Influence of Grain Size and Microstructure on the Mechanical Properties of Fe-6.5 wt%Si High Silicon Steel Prepared by CVD Method

Microstructure and Properties of 3.0% Si Steel Prepared by Twin-Roll Casting Process

Development of microstructure and texture in strip casting grain oriented silicon steel

Microstructural Characterization of Non-Oriented Low Silicon Steel Produced by Compact Strip Production

Microstructure and magnetic domain structure of additively manufactured Fe–Si soft magnetic alloys with 3 and 9 wt.-% Si

Additive manufacturing of Fe-3.5 wt.-%Si electrical steel via laser powder bed fusion and subsequent thermomechanical processing