Abstract:LiZnTi ferrite ceramics with high saturation flux density (Bs), large remanence ratio (Br/Bs) and high saturation magnetization (4πMs) is a vital material for high frequency devices. In the present work, we prepared uniform and compact LiZnTiBi ferrite with large average grain size (>30μm) at 900°C. Firstly, the hybrid materials, including Li2CO3, ZnO, TiO2, Bi2O3 and Fe2O3, were pre-sintered at 850°C at O2 atmosphere. Next, composite additives composited of Li2CO3 and ZnO nanoparticles were added to control grain growth. The influences of the Li2CO3 and nano-ZnO (LZ) on the microstructure and magnetic properties of LiZnTiBi ferrite, especially for grain size, have been analyzed. SEM images demonstrated that moderate LZ additives (x=0.75 wt%) can prevent abnormal grains. Also, the ferrite samples possess compact microstructures. The phenomenon indicated that the LZ additive is a good sintering aid for low-temperature sintering LiZnTiBi ferrites. XRD patterns showed that all samples have a pure spinel phase. The magnetic properties, including Bs, Br/Bs and 4πMs, have weak change when LZ additives were added. However, due to smaller average grain size, the coercivity (Hc) gradually increased. Thus, a low-temperature sintering LiZnTiBi ferrite with high saturation flux density (Bs=311.10 mT), large remanence ratio (Br/Bs=0.86), low coercivity (Hc=244.6 A/m) and high saturation magnetization (Ms=75.40) was obtained when 1.00 wt% LZ additive was added. More important, the LiZnTiBi ferrite possessed uniform average grain. Such a sintering method (i.e., adding composite additive to control abnormal grain) should also promote synthesis of other advanced ceramics for practical applications.

High Permeability and Low Power Loss of Ti and Zn Substitution Lithium Ferrite in High Frequency Range

Zn-Ti co-substituted LiZn microwave ferrites: Sintering characteristics and gyromagnetic properties

Effect of Divalent Metal Ions Substitution on the Magnetic Properties of Ba3Co2-Me Fe24O41 (me = Zn2+, Ni2+) Hexagonal Ferrites

Permeability of Nb and Ta doped lithium ferrite in high frequency range

Low-Loss Composite NiCuZnCo–BaTiO3 With Matched Permeability and Permittivity in High Frequency Range

Influence of Zinc Concentration on Structure, Complex Permittivity and Permeability of Ni–Zn Ferrites at High Frequency

Complex Permeability Spectra of Co-Substituted Lithium Zinc Perminvar Ferrite

Complex permittivity, permeability, and microwave absorption of Zn- and Ti-substituted barium ferrite by citrate sol–gel process

Development of High-Temperature High-Permeability MnZn Power Ferrites for MHz Application by Nb2O5 and TiO2 Co-Doping

Low-temperature Sintered Li-Ferrites and Their Frequency Properties

Effects of Sn Substitution on the Microstructural and Electromagnetic Properties of MnZn Ferrite for High-Frequency Applications

Influences of Bi2O3 Additive on the Microstructure, Permeability, and Power Loss Characteristics of Ni–Zn Ferrites

Temperature and Frequency Characteristics of Low-Loss MnZn Ferrite in a Wide Temperature Range

Magnetic hysteresis loss crossover in Ni0.4Zn0.6Fe1.95Ti0.05O4 ferrite

Influence of Li&lt;sub&gt;2&lt;/sub&gt;CO&lt;sub&gt;3&lt;/sub&gt; and ZnO Nanoparticle on Microstructure and Magnetic Properties of Low-Temperature Sintering LiZnTiBi Ferrites for High-Frequency Applications

Effect of lanthanum substitution on structural, magnetic, and electric properties of Ni–Zn–Co ferrites for radio frequency and microwave devices

Effects of TiO2 doping on the microstructure and magnetic properties of high frequency MnZn power ferrites

Study on structure, magnetic and dielectric properties of li-Zn ferrite with low ferromagnetic resonance line-width and high saturation magnetization synthesized at low temperature by LTCC

Correlating the Microstructure with Magnetic Properties of Ti-doped High-Frequency MnZn Ferrite