Abstract:In this investigation, a series of Na0.5Bi0.47Sr0.02TiO3-δ samples are sintered from1000 to 1100°C, were synthesized utilizing the solid-state method. The XRD results indicate that all samples exhibit a perovskite phase, with the exception of those sintered at 1100 °C, which display no discernible impurity peaks.The SEM results indicate that the average grain size exhibits an increase proportionate to the sintering temperature,which attributes to the variations in the actual Na/Bi ratio. From the study of grain conductivity we can obtain that the dominant factor affecting grain conductivity is the activation energy.At 1100°C,the oxygen vacancy concentration emerges as the primary determinant of grain conductivity. It should be noticed that the phase transition temperature of the sample increases (350°C→400°C) with the increase of sintering temperature, which is due to the local A-site disorder aggravated by high temperature sintering. Therefore, reducing the sintering temperature is beneficial to improve the grain conductivity. The grain boundary conductivity initially rises, then diminishes with increasing sintering temperature.It is evident that the enhanced macroscopic grain boundary conductivity stems from a marked reduction in space charge potential within the 1000-1025°C temperature range. Within the 1050°C-1100°C temperature range,the space charge potential barely changed,the significant decrease of intrinsic grain boundary conductivity can be attributed to the surge in the coverage ratio of grain boundary impurities and the number of grain boundary impurities increased caused by the rapid reduction of grain boundary area and thermal evaporation.The research on electrical performance of NBT-based oxygen-ion conductors will promote the application of NBT-based oxygen ion conductors in solid oxide fuel cells, oxygen sensors and other fields.

Sintering Behavior of Bulk SrBi 2 Ta 2 O 9 Prepared by Solid-State Reaction

Effect of solid-state reaction synthesis temperature of SrBi2Ta2O9 on its sintering behavior

Effect of solid-state reaction synthesis temperature of SrBi 2Ta2O9 on its sintering behavior

Preparation and Sintering Behaviour of Nanostructured SrBi2Ta2O9ceramics

The Sintering Behavior of SrBi2Ta2O9 Associated with Synthesis Temperature of Its Powder in Solid-State Reaction

Preparation and Dielectric Characteristics of Srbi2ta2o9 Ceramics

Preparation and dielectric properties of ceramics in the SrBi2(Ta1-xNbx)2O9 solid solution system

Large energy storage properties of lead-free (1-x)(0.72Bi0.5Na0.5TiO3-0.28SrTiO3)-xBiAlO3 ceramics at broad temperature range

Effects of Bi3+ Content and Grain Size on Electrical Properties of SrBi2Ta2O9 Ceramic

Effect Of Bi Content On The Dielectric Property Of Sbn Ceramics Prepared By Spark Plasma Sintering

The Effect of B2o3-Li2co3 Addition on Sintering Behavior and Dielectric Properties of Ba0.6sr0.4tio3 Ceramics

Effect of synthesis method upon the dielectric properties of SrBi2Ta2O9

Investigation of electrical conductivity and oxygen relaxation behavior for BaBi0.98Sr0.02Nb5-xTixO15-δ ceramics

Fabrication and Ferroelectric Properties of Ba-Doped Strontium Bismuth Titanate Ceramics

Effect of Sintering Temperature on Microstructure and Electrical Properties of Na0.5Bi0.47Sr0.02TiO3-δ Ceramics

Impact of Sm-substitution and microwave sintering on dielectric and mechanical properties of SrBi4Ti4O15 ceramics

Improved Energy Storage Performance of Ba0.4Sr0.6TiO3 Nanocrystalline Ceramics Prepared by Using Oxalate Co-Precipitation and Spark Plasma Sintering

Sintering Behavior and Dielectric Property of BST-BSL Composite Ceramics

Influence of Sintering Temperature on Energy Storage Properties of BaTiO3–(Sr1−1.5Bi ) TiO3 Ceramics

X-ray Diffraction and Raman Scattering Study of SrBi2Ta2O9 Ceramics and Thin Films with Bi3TiNbO9 Addition

Preparation and characterization of metalorganic decomposition-derived SrBi2Ta2O9 thin films