Abstract:To overcome the shortage of long processing time, high energy consumption, and complex controlling in fabricating Fe–Ni alloy coating, this paper was modified Fe–Ni alloy coating based on the mechanical alloying, electrodeposition, laser cladding and DC arc plasma method. Here, Surface Mechanical Attrition Treatment (SMAT) had been chosen as a pre-treatment to fabricate uniform Fe–Ni alloy coating by Spark Plasma Sintering (SPS). After the well-designed coating approach of SMAT + SPS, a homogeneous and continuous Fe–Ni alloy coating was fabricated on a pure iron plate. During study of the effect of SMAT and the subsequent process of SPS on microstructure and mechanical properties of Fe–Ni alloy coating, a valid set of process parameters were investigated. The results show that the thickness of Fe–Ni interface layer was enhanced significantly by SMAT. In comparison, the depth on the SMAT-sample was approximately twice as thick as on the untreated coarse-grained (CG) sample. The relative densification, microhardness and friction and wear performance are significantly related to the sintering temperature, which also affects the microstructure of interface between iron matrix and alloy coating. It has been evidently proved that, the sintering temperature just within 800–900 °C, the optimum performance Fe–Ni alloy coating on the SMATed iron matrix could be obtained, which has higher density, better wear resistance and tighter bonding.

High-temperature surface alloying of nanocrystalline nickel produced by surface mechanical attrition treatment

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Surface Nanocrystallization of Mg-3 Wt.% Li-6 Wt.% Al Alloy by Surface Mechanical Attrition Treatment

Microstructural Evolution in NiTi Alloy Subjected to Surface Mechanical Attrition Treatment and Mechanism

Microstructure and Thermal Stability of Bulk Nanocrystalline Alloys Produced by Surface Mechanical Attrition Treatment

Surface hardening of NiTi shape memory alloy induced by the nanostructured layer after surface mechanical attrition treatment.

Surface Mechanical Attrition Treatment Induced Phase Transformation Behavior in NiTi Shape Memory Alloy

Wear resistance of NiTi alloy after surface mechanical attrition treatment

Corrosion Behavior on Orthopedic NiTi Alloy with Nanocrystalline/amorphous Surface

Microstructural evolution of AZ31 Mg alloy with surface mechanical attrition treatment: Grain and texture gradient

A modified Fe–Ni alloy coating in pure iron combined of surface mechanical attrition treatment and spark plasma sintering approach

Grain refinement at the nanoscale via mechanical twinning and dislocation interaction in a nickel-based alloy

Microstructures and homogenization behavior of a nickel-based superalloy used for 850¬Ý‚ÑÉ turbine disc prepared by electron beam smelting layered solidification

A Coupled EBSD/TEM Analysis of the Microstructure Evolution of a Gradient Nanostructured Ferritic/Martensitic Steel Subjected to Surface Mechanical Attrition Treatment

Microstructural evolution and mechanical properties of Ni/Al reactive nanolaminates with different NixAly intermetallic phases

Effect of Surface Mechanical Attrition Treatment on Biodegradable Mg-1Ca Alloy.

Surface Gradient Structures in Single-Crystal Nickel Alloy Induced by Ultrasonic-Assisted High-Speed Grinding

Phase field study on phase stability at high temperatures in nanograined Fe–Ni alloy prepared by plastic deformation

Ti–Nb–Si-based surface alloy fabricated on TiNi SMA substrate through additive electron beam method: structure and perspectives

Gradient hardening of Ni-based superalloy K403 for enhanced thermal fatigue resistance

Enhancing the Ag Precipitation by Surface Mechanical Attrition Treatment on Cu-Ag Alloys