Abstract:Controlling the structure and properties of low-density C/C porous preforms is the key to the preparation of C/C-SiC composites with excellent friction and wear properties. In this study, C/C porous preforms prepared by chemical vapor infiltration were subjected to high temperature heat-treatment at 2100 degrees C. C/C-SiC composites were prepared by reactive melt infiltration. Effects of high temperature heat-treatment of C/C porous preforms on microstructures, thermal properties and tribological properties of C/C-SiC composites were investigated. The results showed that the porosity and graphitization degree of the C/C porous performs increased after high temperature heat-treatment at 2100 degrees C. The C/C-SiC composites have a higher density (2.22 g/cm(3)), and the porosity is reduced from 5.1% to 3.4%, the phase content of SiC ceramic is increased by 11.9%. The mean free path of phonons is larger when C/C porous preforms have a higher degree of graphitization, resulting in thermal conductivity at room temperature being increased by 2.1 times, and the thermal conductivity at 1200 degrees C being increased by 0.2 times. Wear surface of C/C-SiC composites forms a continuous and stable friction film, which is attributed to the fact that the PyC after high temperature treatment is softer and easier to be extruded into a film. Thus, the friction coefficient is more stable, and the wear rate is reduced under the test loads of 3, 6 and 9 N, by 47.8%, 41.9% and 11.7%, and the average friction coefficients are 0.47, 0.38 and 0.39, respectively. Therefore, high temperature heat-treatment of the C/C porous preforms can improve the thermal conductivity of the C/C-SiC composites, which exhibits a more stable friction coefficient and more wear-resistant.

Influence factors of C/C–SiC dual matrix composites prepared by reactive melt infiltration

Effects of Density and Heat Treatment of C/C Preforms on Microstructure and Mechanical Properties of C/C–SiC Composites

Effect of High Temperature Treatment on the Fabrication and Mechanical Properties of C/C-SiC Composites

The Effects of Heat Treatment of C/C Porous Substance on Microstructure and Mechanical Property of C/SiC Composites

Influence of High-temperature Processing and Different Carbon Matrixes on Behaviour of Infiltration of Molten Silicon into Porous C/C Preforms

Effect of High-Temperature Heat Treatment on the Microstructure and Mechanical Behavior of PIP-based C/C-SiC Composites with SiC Filler

Enhanced Mechanical Property of RMI C/SiC Composites with Optimized Porous Carbon Structure by Heat Treatment

Influence of the Porosity of C/C on the Characterization of C/C-Sic Composites Prepared by Reactive Melt Infiltration Method

Influence of High Temperature Treatment of C/C Porous Preform on Friction and Wear Behavior of C/C-SiC Composites

Effect of heat treatment on mechanical properties of C/C composites with C-SiC-TaC-C multi-interlayers

Influence factor of MoSi2-SiC composites synthesised by reactive infiltration processing

Effect of chemical vapor infiltration on the flexural properties of C/C-SiC composites prepared by the precursor infiltration pyrolysis method

Microstructure and Oxidation Resistance of C/C-SiC Composites Prepared by Reactive Melt Infiltration

Effect of C/SiC Volume Ratios on Mechanical and Oxidation Behaviors of Cf/C–SiC Composites Fabricated by Chemical Vapor Infiltration Technique

The Effect of Heat Treatment on Tensile Properties of 2D C/SiC Composites

Improvement of the Mechanical and Thermophysical Properties of C/SiC Composites Fabricated by Liquid Silicon Infiltration

Effects of Density of C/C Preform and Reaction Temperature on the Mechanical Properties and Microstructure of C/C-SiC Composites

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Cf/Sic Composites

Effect of Heat Treatment on the Microstructure and Ablation Performance of C/C-SiC Composites Containing ZrSi2-Si.

Influence of Graphitization Treatment on Microstructure and Flexural Strength of C/C-ZrC-SiC Composites Fabricated Via Reactive Melt Infiltration