Abstract:On-site lightning impulse (LI) test waveform, restricted by the large load capacitance and impulse generator's inherent inductance, has a long wavefront time T-f compared with standard LI, called non-standard LI. The non-standard LI test has been carried out in the field. But its insulation defect detecting effectiveness is not clear. In this paper, a generating system of impulses with different waveform parameters, including double exponential impulses with different wavefront times in the range of 0.08 similar to 23.5 mu s and an oscillating LI with wavefront time around 10 mu s, was established. The insulation characteristics of SF6 gas gap with highly inhomogeneous electric field under impulses with different waveform parameters were investigated. Experimental results show that the insulation defects detecting effectiveness of oscillating LI with long T-f around 10 mu s is lower than that of standard LI. T-f plays an important role in the insulation defects detection. With T-f increases, the 50% breakdown voltages for rod-plane gaps have an increased trend. The V-t curve presents a U-shape. Prospective voltage is introduced to evaluate the insulation defects detecting effectiveness. The prospective voltage-time characteristics confirm the conclusion that with the increase of impulse voltage T-f, the detection effectiveness for GIS insulation is reduced. The gap distance has influence on the shape of V-t curve. With distance increase, the 50% breakdown voltage of the gap is more sensitive to the wavefront time T-f and voltage rise rate dU/dt. Corona stabilization effect is not just in relationship with the rise rate of impulse, but also with electrode structure and gas pressure. The critical dU/dt for corona stabilization is calculated for different rod-plane gaps.

Response Time Test for Low Voltage Lightning Protection Device

Experimental Study of Protection Measures for Preventing 10 KV Insulated Conductors from Breakage Caused by Lightning Stroke

Response time of surge protective devices employing triggered spark gap technology

Test Methods for Performance of Protective Devices Excited by Conducted Transient Electromagnetic Disturbance

Study on Gas Discharge Characteristics for Gap Type Surge Protective Device under Low Atmospheric Pressure

Quantitative Determination Of Response Time And Time-Varying Characteristics Of Surge Protective Devices

Research on follow-current interruption characteristics of gas discharge tube and protective measures

A Test Method for Response Behavior of Metal-Oxide Arrester Subjected to Transient Electromagnetic Disturbances

Study on Impulse Breakdown Characteristics of Internal-Gap Lightning Protection Device Applied to 35 kV Distribution Line

Research on Protection Performance of Surge Protective Devices against Electromagnetic Pulse

Study on Lightning Protection Hardware Against Lightning-Caused Breaking of Insulation-Covered Conductors in 10 Kv Overhead Distribution Networks

Investigation on characteristics of arc extinguishing time of a new lighting protection gap for transmission lines

Test Method for Lightning Response of Real Transmission Lines

Research on the Detecting Effectiveness of On-site Lightning Impulse Test for GIS Equipment with Insulation Defects

Investigation of Turn-on Speeds of Electrostatic Discharge Protection Devices Using Transmission-Line Pulsing Technique

A New Method to Evaluate the Effectiveness of Impulse Voltage for Detecting Insulation Defects in GIS Equipment

Transient Response of Transient Voltage Suppressor Device under EMP with Fast Rise Time

Adjustment of wave front time and overshoot in lightning impulse test for transformer insulation

Discussion on Lightning Impulse Test Waveform According to Breakdown Characteristics of SF6 Gas Gaps

Introductions of Some Types of Testing Devices for Lighting Equipments

A Validity Analysis of Extending Front Time in Lightning Impulse Tests for Ultrahigh-Voltage Transformers