Abstract:Organic light-emitting diodes (OLEDs) have been intensively studied in the past several years due to their unique image quality and potential commercial application in flat-panel displays. Since Tang and Van Slyke reported the first double-layer green thin-film OLED with high brightness and low driving voltage, the OLEDs have demonstrated their good prospect around the world for this new display technology. The distinguished characteristics of OLEDs for displays include high efficiency, wide viewing angle, fast response time, low power on consumption and potentially low cost. In addition, their low processing temperatures, and thus versatility in substrates, render them suitable for some novel display applications, such as flexible displays. Over the past decade, the OLED display technology has made rapid progress; the major technical issues associated with these advanced OLED structures in general are how to design their optical structures and how to choose suitable materials with required electrical and optical properties. To achieve further advances in the brightness, power efficiency and the color purity of the electroluminescent spectrum of OLEDs, it will be necessary to develop new materials and design suitable device structures with long-term stability and lifetime. The mechanism for electroluminescent (EL) phenomenon involves in the injection of holes from anode and electrons from cathode under forward bias voltage, then the hole-electrons from excitons, and light emission appears through the radiative recombination of excitons. In order to obtain optimal luminance and power efficiency, organic electroluminescence requires the effective injection and recombination of the electrons and holes, and the injection balance of the electron and hole. Therefore, the reasonable device structures and the choice of the function materials of the OLEDs play the important role to improve the brightness, power efficiency and the device's stability. Based on conventional two-layer devices, the double heterostructure three-layer OLEDs with a structure of indium-tin oxide (ITO) /N, N'-diphenyl-N, N'-bis (1-naphthyl) (1,1′-biphenyl) -4,4′-diamine (NPB) /2,9-dimethyl-4, 7-diphenyl-1, 10-phenan throline (BCP)/8-hydroxyquinoline aluminum (Alq3)/Mg: Ag have been fabricated using vacuum deposition method. Through characterizing the electroluminescence (EL) spectrum and the performance of the devices, the influence of different thickness from the BCP ultrathin film on the performance of OLEDs have been investigated. The results showed that when the thickness of BCP ultrathin film gradually ranges from 0.1 nm to 4.0 nm, the EL spectrum of the OLEDs shift from green to greenish-blue, and at last the device is absolutely blue-emitting from the hole transport layer of NPB. The ultrathin film of the BCP plays the role as not only effectively regulating the recombination region of charge carriers as well as EL spectrum, but also enhancing the brightness and luminance efficiency of OLEDs.

The Effect of PBD As Electron-transporting Laver in Alq3: DCJTB Organic Light-emitting Devices

Studies on the Performances of Blue Organic Electroluminescent Device with Different Electron Transport Layers

Green to White to Blue Oleds by Using Pbd As A Chromaticity-Tuning Layer

Color-tunable Organic Light-Emitting Devices Using a Thin N,N′-bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine Layer at Heterojunction Interface

Effect of BCP Ultrathin Layer on the Performance of Organic Light-Emitting Devices

Improving the Performance of Organic Light-emitting Device Using Doped Alq_3 into NPB

Effect of A Thin Layer of Tris (8-Hydroxyquinoline) Aluminum Doped with 4-(Dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl) on the Chromaticity of White Organic Light-Emitting Devices

Modification Effect of NPB Film Thickness on Charge Carrier Recombination Zone of Heterostructure OLEDs

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

Study of the Effect of Film Thickness on the Performance of NPB/Alq3 Double Layer Organic Light-Emitting Diodes

Effects of PBD on the Electroluminescence (EL) of Tb Complex Doped PVK System

Nondoped-type red organic electroluminescent devices based on a 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran ultrathin layer

Bright red-to-yellow organic light-emitting devices based on polarization-induced spectral shifts and broadening.

Using doped Alq3 in NPB hole transmission layers to produce high performance blue organic light emitting devices

Electroluminescence of Organic Light-Emitting Diodes with an Ultra-Thin Layer of Dopant

Effect of Different Processing Methods for the Hole Transporting Layer on the Performance of Double Layer Organic Light-Emitting Devices

Effect of an Ultrathin BCP Layer on Organic Light-emitting Devices Performance

The colour-tuning effect of 2,9-dimethyl-4,7-diphenyl-1, 10-phenanthroline in blue–red organic light-emitting devices

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Organic Electroluminescent Characteristics of Ps:Npb Composite Hole Transporting Layer

Influence of PVK:NPB Hole Transporting Layer on Organic Light-Emitting Devices Characteristics