Abstract:We have designed a device of new multi-layer structure and carried out the experiment on white light-emitting. In a white organic EL device with multi-layer, generally, white light emission can be obtained by blending blue emission and one or two others with long wavelength such as yellow, red or green emission. Because the energy band of material emitting blue light is broad and the efficiency of it is lower, how to raise the efficiency of blue emission from the white light-emitting device is the key of fabrication of a white organic light-emitting device with pure color, high efficiency and brightness. Therefore, we have designed the new structure of a device reasonably and increased the efficiency of blue light emission effectively and (conveniently). The new multi-layer structure of the device limits blue emission within a very narrow scope (between) hole and electron transport layer, and causes one part of majority holes injected in to be captured by rubrene to combine with electrons in the transport process for yellow emission, and the other part of them to (arrive) the thin layer of DPVBi for increasing blue emission, so raising the efficiency of white light emission (over) blending yellow and blue emission, and enhancing the whole function of the device. From the electroluminescence spectrum, it is found that only the DPVBi and rubrene could emit light but NPB and Alq_3 couldn't. This explains that all energy of Alq_3 is transported to DPVBi and rubrene. The structure of the device is ITO/NPB(35 nm)/DPVBi(4 nm)/Rubrene(0.1 nm)/Alq_3(6 nm)/NPB(5 nm)/DPVBi(4 nm)/Rubrene(0.1 nm)/Alq_3(6 nm)/NPB(5 nm)/DPVBi(4 nm)/Alq_3(35 nm)/LiF(0.5 nm)/Al(200 nm). The commission international De L'Eclariage (CIE) coordination of the devices is very stable at (0.33, 0.34) while the applied voltage varies from 8 V to 14 V. The maximum electroluminescence efficiency is 4.0 cd /A at 10 V. It may be deduced that the reason why the device can emit white light is that blue and yellow emission can be given of by DPVBi and rubrene respectively. There are so characteristics because of the design new multi-structure making the efficiency of blue (emission) increased and the property of the device improved obviously. So we consider that the improvement of emission comes from doping of rubrene leading to carrier transporting from Alq_3 to DPVBi.

Effect of A Thin Layer of Tris (8-Hydroxyquinoline) Aluminum Doped with 4-(Dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl) on the Chromaticity of White Organic Light-Emitting Devices

White Light Emission From Exciplex Using Tris-(8-Hydroxyquinoline)Aluminum As Chromaticity-Tuning Layer

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Thickness Dependent Emission Color of Organic White Light-Emitting Devices

White Organic Light Emitting Device with Dyestuff DCJTB Blended in Polymer

White Organic Light-Emitting Devices Using 2,5,2('),5(')-Tetrakis(4(')-Biphenylenevinyl)-Biphenyl As Blue Light-Emitting Layer

White Emission from Organic Light-Emitting Diodes with A Super-Thin Bcp Layer

Efficient white organic light-emitting devices using a thin 4,4′-bis(2,2′-diphenylvinyl)-1,1′-diphenyl layer

High Efficiency Small Molecule White Organic Light-Emitting Devices with a Multilayer Structure

Tuning Chromaticity of White Organic Light-emitting Devices with a New Multilayer Structure

Color-tunable Organic Light-Emitting Devices Using a Thin N,N′-bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine Layer at Heterojunction Interface

Energy Distribution in White Organic Light-Emitting Diodes with Three Primary Color Emitting Layers

Comparison of electron transporting layer in white OLED with a double emissive layer structure.

Efficient White Organic Light-Emitting Devices Using 4,7-Diphenyl-1,10-phenanthroline As Block Layer

The white OLED were produced using the doped Alq3 in NPB hole transport layer

Chromaticity-stable organic white light-emitting devices based on mixed pyridine–phenol boron complex

High Performance White Organic Light-Emitting Devices Based on A Novel Red Fluorescent Dye 3-(Dicyanomethylene)-5, 5-Dimethyl-1-(4-dimethylamino-styryl) Cyclohexene

High-performance non-doped-type white organic light-emitting devices based on dual ultrathin layers

Effects of Emitting and Hole Transporting Layers on the Performance of White Organic Light-Emitting Divice

White Light Emission Using A Phosphorescent Sensitizer In Organic Light-Emitting Devices

Study of the Effect of Film Thickness on the Performance of NPB/Alq3 Double Layer Organic Light-Emitting Diodes