Abstract:In this work, a uniform superhydrophilic coating was prepared by grafting N-(2-aminoethyl)-3-aminopropyltriethoxysilane oligomers(AEAOS) onto nanosilica by using silane coupling agent modification and coated on the surface of aluminum alloys to reduce water droplet generation. The grafting and dispersibility of modified nanosilica and aminosilane oligomers were characterised using Fourier transform infrared (FTIR) and dynamic light scattering (DLS). The surface state, composition, and roughness of the coatings were characterised with scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and optical profilometer. The hydroxyl and organic content of modified nanosilica was analyzed by Thermogravimetric Analysis (TGA). The compactness of the coating film is analyzed by an electrochemical impedance. The hydrophilicity and adhesion of the coating films were evaluated by contact angle and adhesion testing. By adjusting the concentration of amino groups in the nanosilica sol, the results show that the amino groups promote the silane grafting on the surface of nanosilica. The 10% addition of AEAOS gives the modified silica film a contact angle of <5° with superhydrophilic properties. The polarization resistance of the superhydrophilic coating film is about 10 times higher than that of the original aluminum alloy. The surface of the coated films is homogeneous and dense, showing high resistance to polarization and good corrosion resistance.

Synthesis and Characterization of Aluminum Particles Coated with Uniform Silica Shell

Preparation of dense modified nanosilica superhydrophilic coatings on aluminum alloy surfaces by adjusting amino groups

Study on the densification of composite coating particles of α-Al2O3–SiO2

Preparation and Properties of Polysiloxane Coating Modified by Colloidal Silica

Synthesis, Analysis, and Characterization of Aluminum Nanoparticles Coated with 2,2,4-Trimethylpentane

Preparation of composite coating particles of α-Al2O3–SiO2 by heterogeneous nucleation-and-growth processing

Thermal Properties of the Aluminum Particle Reinforced Silicone Rubber Composites

Preparation of Core/Shell Structure of α-Al(OH) 3 -SiO 2 by Heterogeneous Nucleation-and-Growth Processing

Inorganic microencapsulated core/shell structure of Al-Si alloy micro-particles with silane coupling agent

Rare-Earth Oxide Coating for Sub-Micro Particulates Reinforced Aluminum Matrix Composites

Microstructure and Tensile Properties of Yttria Coated-Alumina Particulates Reinforced Aluminum Matrix Composites

Synthesis and Characterization of Silica–silver Core–shell Composite Particles with Uniform Thin Silver Layers

Electrochemical and mechanical properties of superhydrophobic aluminum substrates modified with nano-silica and fluorosilane

Preparation and film properties of SiO2@P(MMA/BA/3FMA) composite nanoparticles

The Coating Process of Nano-scale Hydrous Silica Film on TiO2 Particles by Chemical Deposition in Aqueous Solution

Aluminum particles with nano-size defects in their alumina shells and their thermal oxidation properties

Fabrication of Α-Alo(oh)·sio2 with Core-Shell Structures by Heterogeneous Nucleation-and-growth Processing

Fabrication of Composite Coating Particles with Mullite Stoichiometric Ratio by a Novel Processing

Preparation & characterization of composite with micron AI coating in nanometer Fe particles

Co/SiO2 Composite Particles with High Electromagnetic Wave Absorbing Performance and Weather Resistance

Fabrication and characterization of silver core and porous silica shell nanocomposite particles