Abstract:With the development of highly integrated and miniaturized electronic devices, silicone rubber composites with good mechanical flexibility, high thermal conductivity and excellent flame resistance have aroused considerable interest in both industrial and research community. However, the effect of different geometries of thermally conductive fillers on the processing, mechanical and thermal properties as well as flame resistance of silicone rubber composites is still not clear. Herein, liquid silicone rubber (LSR) composites filled with three geometries of thermal conductive fillers i.e. spherical-like aluminum oxide (Al2O3), irregular aluminum nitride (AlN) and 2D boron nitride (BN) sheets were prepared by an extremely simple mechanical-mixing process. As expected, incorporation of BN sheets into LSR matrix produces much higher increase in the viscosity, tensile strength and hardness than the corresponding AlN and Al2O3 fillers, respectively. Typically, at a fixed filler loading of 120 phr, the increased thermal conductivity and heating/cooling efficiency of the BN/LSR composites display much better than the corresponding AlN/LSR and Al2O3/LSR composites, e.g. 316, 124 and 88% improvement in thermal conductivity, respectively. Interestingly, the thermal stability and flame resistance of the three composites present unexpected different phenomena. Compared with the pure LSR, the addition of AlN and Al2O3 exacerbates the thermal degradation of LSR chains, while the presence of BN sheets improves the flame resistance of LSR dramatically, which is attributed to the compact BN/silica residue after burning that effectively restricts the heat and oxygen to attack the inside LSR chains.

Thermal Properties of the Aluminum Particle Reinforced Silicone Rubber Composites

Fabrication of Nanocrystalline Zro2 Particle Reinforced Aluminum Alloy Composite by Squeeze Casting Route

Experimental and Theoretical Studies of Effective Thermal Conductivity of Composites Made of Silicone Rubber and Al2o3 Particles

Effect of graphite and its surface modification on thermal conductivity of silicone rubber

Influence of Phase and Morphology on Thermal Conductivity of Alumina Particle/Silicone Rubber Composites

Effect of Micro-Si3n4-Nano-Al2o3 Co-Filled Particles on Thermal Conductivity, Dielectric and Mechanical Properties of Silicone Rubber Composites

Electrical properties of high thermal conductivity inorganic fillers/silicone rubber composites

Effects of Al2O3 on Thermal Conductivity of Silicone Rubber

Thermal Conductivity of Silicone Rubber Filled with Al2O3

Preparation of Nano-silver Coated Al2O3 Particles and the Thermal Conductivity of Nano-silver Coated Al2O3/Silicone Rubber Composites

Effect of spherical alumina crystalline phase content and particle size distribution polydispersity on the properties of silicone rubber composites

Improving the Thermal and Mechanical Properties of an Alumina-Filled Silicone Rubber Composite by Incorporating Carbon Nanotubes

Enhanced Thermal Conductivity by Combined Fillers in Polymer Composites

A Novel Branched Al2O3/Silicon Rubber Composite with Improved Thermal Conductivity and Excellent Electrical Insulation Performance

Processing, thermal conductivity and flame retardant properties of silicone rubber filled with different geometries of thermally conductive fillers: A comparative study

Preparation of nanoalumina/EPDM composites with good performance in thermal conductivity and mechanical properties

Thermal, electrical, and mechanical properties of addition-type liquid silicone rubber co-filled with Al<sub>2</sub>O<sub>3</sub> particles and BN sheets

Simultaneously enhance thermal conductive property and mechanical properties of silicon rubber composites by introducing ultrafine Al2O3 nanospheres prepared via thermal plasma

Low dielectric permittivity and high thermal conductivity silicone rubber composites with micro-nano-sized particles

Performance of Silicone Rubber Composites Filled with Aluminum Nitride and Alumina Tri-Hydrate