Study for Diffusion Process in Chemical Heat Treatment

LI Yun-gang

2010-01-01

Abstract:Diffusion always plays a decisive role in the process of speed control during chemical heat treatment,and studying of diffusion has great significance.The macroscopic laws and microscopic mechanisms of diffusion were summarized in this paper,as well as the effect factors of diffusion process during the chemical heat treatment.

What problem does this paper attempt to address?

Mechanisms and Methods for Diffusion Process in Solid Metals

Yungang Li

2009-01-01

Abstract:Diffusion is one of the most important mass transfer manners,and Diffusion process always plays a decisive role in the process of metallurgical practices and preparation of materials.Microscopic mechanisms and its macroscopic laws of diffusion as well as methods used are mainly discussed in this paper.
Thermally Induced Diffusion of Chemicals under Steady-State Heat Transfer in Saturated Porous Media

Huaxiang Yan,Majid Sedighi,Haijian Xie

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119664

IF: 5.2

2020-01-01

International Journal of Heat and Mass Transfer

Abstract:Thermally induced diffusion of chemicals is observed in many natural phenomena and engineering processes. We present analytical solutions to the non-isothermal diffusion of chemicals under combined effects of molecular and thermal diffusion processes and under variable diffusion coefficient with temperature. The generalized integral transform technique (GITT) is adopted to successfully derive the analytical solutions to the one-dimensional boundary problem under Neumann and Dirichlet outflow conditions. The accuracy of the analytical model developed is examined against three benchmarks including two experimental datasets. The analytical models are applied to develop an understanding of how the chemical transfer under non-isothermal conditions is governed by a combination of the Soret effect and temperature dependency of diffusion coefficient. We demonstrate that the mass transfer components due to thermal diffusion (or Soret effect) and the temperature dependency of diffusion coefficients are equally important to develop an accurate assessment of non-isothermal diffusion problem. Under the conditions of the case study considered, we show that a threshold for the Soret coefficient exists at which the temperature dependency of chemical diffusion coefficient can induce equally or larger influences on the chemical compared to the influence of thermal diffusion. The analytical solutions proposed also provide modelling benchmarks to examine the accuracy of alternative multiphysics numerical models for studying the non-isothermal diffusion problems in porous media. (C) 2020 Published by Elsevier Ltd.
An Analytical Model for Diffusion of Chemicals under a Thermal Gradient in Finite Clayey Soil

Chunhua Zhang,Haijian Xie,Hao Ding,Hywel R. Thomas,Zhilin Sun,Yun Chen

DOI: https://doi.org/10.1016/j.compgeo.2022.104889

IF: 5.218

2022-01-01

Computers and Geotechnics

Abstract:An analytical solution to non-isothermal diffusion of chemicals in finite porous medium with different combinations of boundary and initial conditions is presented. The average degree of diffusion was proposed to assess the contaminant removal efficiency from polluted soil with different initial contaminant concentration distribution conditions considering chemical and thermal diffusion. The dimensionless time factor for the average degree of diffusion U = 90% can be decreased by a factor of 8.4 in the case with rectangular initial solute concentration distribution considering thermal diffusion. An application of the model to study the effects of initial solute concentration distribution and adsorption on the average degree of diffusion show that both the adsorption performance of clayey soil to the contaminant and the initial solute concentration distribution have a significant effect on the average degree of diffusion. In the cases with rectangular and inverse triangular initial solute concentration distributions, when U = 50%, the times increase by factors of 2.2 and 5.3, respectively, compared to the case with triangular initial solute concentration distribution. An application of the model to study the effects of temperature on the average degree of diffusion of contaminant in polluted soil show that the temperature difference has a significant effect to promote the contaminant transport in clayey soil by increasing both of the thermal diffusion and chemical diffusion effect. It may be an effective method to remove contaminant from polluted soil by thermal diffusion.
General Rule and Promising Future of Mechanical Energy Aided Thermal Diffusing Process

Xu Sun

2004-01-01

Abstract:The general rule of mechanical energy aided chemical thermal diffusing process has been summarized based on the prevenient experimental results.The decomposition,adsorption and diffusion processes,commonly found in the normal chemical thermal treatments,also occur in the mechanical energy aided diffusing process.Because of the bombardments of the particles,the lattice atoms on the surface are activated,vacancies and other lattice defects are formed,which result in a lattice defects diffusion process in stead of a pure lattice diffusion process.As a result,the temperature and the duration of the thermal chemical procedure,and the deformation of the workpieces are reduced.With these advantages in guarantee a high efficiency of energy,high quality of products,and low cost of the equipment,the mechanical energy aided chemical thermal treatment will become a promising process for carburising,nitriding,metal diffusion and all the other similar processes in the 21~(st) century.
Application of the Thermodynamic Extremal Principle to Diffusion-Controlled Phase Transformations in Fe-C-X Alloys: Modeling and Applications

Wangwang Kuang,Haifeng Wang,Xin Li,Jianbao Zhang,Qing Zhou,Yuhong Zhao

DOI: https://doi.org/10.1016/j.actamat.2018.08.008

IF: 9.4

2018-01-01

Acta Materialia

Abstract:Diffusion-controlled phase transformations are of singular importance in controlling microstructures and mechanical properties but are difficult to model and calculate for Fe-C-X alloys because of the large difference in the diffusivities of the interstitial element C and the substitutional element X. In this work, the thermodynamic extremal principle was applied to propose a modified quasi-sharp-interface model that integrates trans-interface diffusion from the product phase to the interface, trans-interface diffusion from the interface to the parent phase, interface migration and bulk diffusion of C and X. Applications to isothermal and cyclic phase transformations showed that the model allows the arbitrary setting of the initial conditions. For isothermal phase transformations, three different kinds of characteristic phase transformation kinetics (i.e., a gradual transition from non-partition to partition, a sharp transition from non-partition to partition and solely partition) were found, and their dependence on the interface properties, the grain size and the isothermal temperature was discussed. For both isothermal and cyclic phase transformations, the important roles of trans-interface diffusion and interface migration were highlighted.
Study on Influence of Air Distribution in Sintering Process on Sinter Quality

ZHANG Dai-hua,HE Zhi-jun

DOI: https://doi.org/10.3969/j.issn.1000-8764.2012.02.001

2012-01-01

Abstract:In this paper,the influence of air distribution in sintering process on sinter quality was researched by the combining method of the laboratory experiments and field test.Through the field test,it is known that fluctuations exist in air distribution of each windbox at both sides of double wind main,the surface sinter on the sintering machine appears uneven,and there is also mineralogical difference.The sintering pot test result shows that the optimal control range for sintering process parameters is ignition negative pressure form 10 to 11 kPa,sintering negative pressure from 11 to 12 kPa and ignition temperature 1 030 ℃.By adjusting the production process according to the abovementioned parameters,sinter quality can be improved.
Heat-transfer simulation of slice potato during drying.

Jun WANG,Zheng-huai LIU,Jin-shuang WANG

DOI: https://doi.org/10.3321/j.issn:1008-9209.2000.06.021

2000-01-01

Abstract:Internal heat and mass diffusion process is the base of the study on drying mechanism and drying technology. In the paper, the simultaneous moisture and heat diffusion equation with heat-moisture diffusion have been developed and used to solve simultaneously heat-transfer. The third boundary constraint model has been considered. Avoiding the man-made mistake which internal moisture diffusion models and internal heat diffusion models are divided up, internal heat diffusion is simulating together with internal moisture diffusion. Application was made and predicated results agree with the experimental data on the whole. The internal temperature of slice potato during drying isn't identical to the surface temperature during drying.
DETERMINATION AND ANALYSIS OF THE EFFECTIVE DIFFUSIVITY OF ADSORPTION REFRIGERATION WORKING PAIR

Qin Wang,Guangming Chen,Baoqi Han

DOI: https://doi.org/10.3321/j.issn:0254-0096.2001.02.014

2001-01-01

Abstract:The effective diffusivity of adsorption refrigeration working pair 13X-H2O was determined by TG in unsteady diffusition.The data range is from 50℃ to 250℃ in temperature and from 0.6kPa to 3.5kPa in pressure.The experimental data showed that the influences of pressure and concentration on the effective diffusivity are very small and can be expressed in the Arrhenius equation.The surface diffusion of water is the main control factor in the pellet diffusion.
Analytical Model for Steady-State Solute Diffusion in Non-Isothermal Fractured Porous Media

Huaxiang Yan,Haijian Xie,Petr Nikolaev,Hao Ding,Yanghui Shi,Yun Chen

DOI: https://doi.org/10.1016/j.jhydrol.2022.128872

IF: 6.4

2023-01-01

Journal of Hydrology

Abstract:Mass transfer in non-isothermal fractured porous media have a wide application in many natural phenomena and engineering processes. The current study focuses on developing alternative formulations of steady-state analytical modelling for thermally induced solute diffusion in fractured porous media. The proposed analyt-ical frameworks are validated by two set of experimental data. The varied examples of coupled heat transfer and solute diffusion are evaluated by the proposed solution to discuss the effects of thermal diffusion, flow opera-tional conditions, geometry and thermal properties of fracture and matrix on the overall transport of solute in a fractured porous media. It is found that thermal-diffusion process, or explicitly as a "Soret effect (ST)", is a non -negligible part for investigating solute transport in non-isothermal fractured porous media. For example, increasing ST from 10-3 K-1 to 10-2 K-1 leads to a reduction of solute concentration by a factor of 1.2. We demonstrate that a larger Peclet number ensures the temperature of the solute along the fracture decreasing while its concentration along the fracture increasing. However, an increase of the temperature difference be-tween the entry and the output shows an opposite trend. An increase in fracture aperture or matrix thickness leads to temperature decreasing and concentration increasing along the fracture and matrix as a larger amount of solute are injected from the inlet boundary. The presented analytical solutions may also serve as a benchmark test tool for alternative numerical studies of coupled heat transfer and solute diffusion in fractured porous media.
The Research and Application of Computer Simulation on Heat Treatment in China

Jiansheng Pan,MingJuan Hu,Weimin Zhang,D. Ruan,D. Tian

1998-01-01

Abstract:The researches of mathematical model and computer simulation on heat treatment and their application in industry in China have been introduced in this paper. The basic researches such as three-dimensional FEA, dealing with nonlinear problem, coupling calculation of temperature - phase transformation - stress/stain, theoretical and testing method of heat transfer on the interfaces, non-Fourier analysis of strongly transient heat transfer problems, atom-sized simulation, simulation of fluid flow and etc. have all been included in this paper. On the other hand, great attention has been paid on the application of computer simulation in practice by heat treatment circles in China. Excellent results have been got in formulating quenching technique for complex components, optimizing heating standard, predicting the microstructure, property as well as stress/strain of large-sized components being heat treated, optimizing hydrogen annealing technique, dynamic controlling of chemical heat treatment, laser heat treatment, hydrokinetical design of jumbo-sized gas carburizing furnace and so on.
Coupling Effects of Chemical Stresses and External Mechanical Stresses on Diffusion

Fu-Zhen Xuan,Shan-Shan Shao,Zhengdong Wang,Shan-Tung Tu

DOI: https://doi.org/10.1088/0022-3727/42/1/015401

2008-01-01

Journal of Physics D Applied Physics

Abstract:Interaction between diffusion and stress fields has been investigated extensively in the past. However, most of the previous investigations were focused on the effect of chemical stress on diffusion due to the unbalanced mass transport. In this work, the coupling effects of external mechanical stress and chemical stress on diffusion are studied. A self-consistent diffusion equation including the chemical stress and external mechanical stress gradient is developed under the framework of the thermodynamic theory and Fick's law. For a thin plate subjected to unidirectional tensile stress fields, the external stress coupled diffusion equation is solved numerically with the help of the finite difference method for one-side and both-side charging processes. Results show that, for such two types of charging processes, the external stress gradient will accelerate the diffusion process and thus increase the value of concentration while reducing the magnitude of chemical stress when the direction of diffusion is identical to that of the stress gradient . In contrast, when the direction of diffusion is opposite to that of the stress gradient , the external stress gradient will obstruct the process of solute penetration by decreasing the value of concentration and increasing the magnitude of chemical stress. For both-side charging process, compared with that without the coupling effect of external stress, an asymmetric distribution of concentration is produced due to the asymmetric mechanical stress field feedback to diffusion.
Study on Gas Diffusion Through Ash Layer During Coal Combustion Process and the Application

WANG Yuan,LUO Yong-hao,LIN Peng-yun,JI Jun-jie

2010-01-01

Abstract:A macro-thermal gravimetric(macro-TG) apparatus was set up and used to study the variation law of effective diffusivity during coal combustion by measuring reaction rates of coal char.The fit formula of effective diffusivity based on experimental results was then applied to improve the integrated model of coal combustion in chain grate boilers,after which a comparison was made among predicted values before and after the model improvement and actual measurements.Results show that for all coals,the effective diffusivity reduces along with the progress of reaction in exponential relationship to the ash layer thickness.Coal rank and temperature play important roles in influencing the effective diffusivity.Compared with bituminous coal,anthracite results in lower initial effective diffusivity and higher reducing rate of the diffusivity.When the reaction temperature gets higher than ash fusion point,sintering phenomenon may occur,which will make the diffusivity reduced.The improved model that considers the influence of ash accumulation on the effective diffusivity can provide more accurate prediction of gas production distribution and overall combustion rate in chain grate boilers.
Study of a Generalized Thermoelastic Diffusion Bi-Layered Structures with Variable Thermal Conductivity and Mass Diffusivity

Zhang-Na Xue,Ya-Jun Yu,Xiao-Ya Li,Xiao-Geng Tian

DOI: https://doi.org/10.1080/17455030.2017.1397810

2017-01-01

Waves in Random and Complex Media

Abstract:Physical properties may change with temperature and concentration, especially in high temperature and concentration. In this work, the dynamical treatment of a bi-layered structure is implemented under the generalized thermoelastic diffusion theory. To distinguish from existed works, variable thermal conductivity and mass diffusivity of both media are considered. The model is subjected to a sudden thermal shock and a chemical shock, respectively. An analytical technique based on Laplace transform is adopted. Numerical results are evaluated and represented graphically, from which the effects of thermal conductivity and mass diffusivity of both media on the responses are discussed. And finally, some concluding remarks are summarized, based upon which the structure may be optimized by adopting suitable material parameter in both thermal and diffusive sense.
Influence of Diffusion on Thermogravimetric Analysis of Carbon Black Oxidation

Qiang Song,Bailei He,Qiang Yao,Zhongwei Meng,Changhe Chen

DOI: https://doi.org/10.1021/ef0600659

IF: 4.6541

2006-01-01

Energy & Fuels

Abstract:Experiments by TA2100 and STA409 C/3/F derived different kinetic parameters for same reaction. The difference changed greatly with sample load, due to mass transfer. A model was built to describe the influence of intraparticle, interparticle, and external diffusions on the thermogravimetric process. Model analysis showed that the influences of three diffusions were determined by adjustable parameters (R-p/r(e), e, e(L - e), and T) once the reaction was set and became significant with the increases in R-p/ r(e), e, e( L - e), and T. These influences can be figured out by numerical simulation. For carbon black oxidation, when the particle size was small (R-p/r(e) < 139.3), the sample layer was thin (e < 0.3 mm), and the crucible height was short (L < 2 mm), the influences of diffusions can be neglected. A data process method was presented to eliminate the influence of diffusions and the thermogravimetric experimental data by STA409 C/3/F were reprocessed and consistent kinetic parameters were obtained.
Study on Diffusion Kinetics and Law of Chromium on the Surface of Low-Carbon Steel

Shixian Zhang,Haichao Zhang,Hongbo Zhang,Xiaoping Zhao,Yungang Li

DOI: https://doi.org/10.3390/coatings13010098

IF: 3.236

2023-01-01

Coatings

Abstract:Cr/low-carbon steel surface composites were prepared by aqueous solution co-deposition and high-temperature solid-state diffusion technology, and the macro rule of the solid-state diffusion of chromium on the surface of low-carbon steel was analyzed. The molecular dynamics (MD) method was used to simulate and calculate the diffusion process of the Cr/Fe interface, and the macro and micro diffusion mechanisms were analyzed. The results show that the diffusion of the chromium in iron is the combined action of the temperature, crystal structure and lattice distortion, and the diffusion coefficients of chromium in alpha-Fe and gamma-Fe have little difference. The vacancy diffusion mechanism of the first adjacent transition is the main diffusion mode. In practice, chromium atoms diffuse along the grain boundaries of the low-carbon steel matrix and provide pinning at the grain boundaries to prevent grain growth. The simulation law is in good agreement with the experimental law. The variation law of the average diffusion coefficient of chromium atoms with temperature is obtained. The diffusion rate of chromium in the bcc crystal structure is obviously higher than that in the fcc crystal structure. In the same crystal structure, the diffusion coefficient of chromium increases with the increase in temperature. However, in the lattice transition temperature region, the diffusion coefficient of chromium gradually decreases with the increase in temperature until the end of the transformation.
A General Theory for Heterogeneous Coupled Chemical Reaction-Thermal Diffusion Systems

Zhen-Bang Kuang

DOI: https://doi.org/10.1016/j.cplett.2018.11.037

IF: 2.719

2018-01-01

Chemical Physics Letters

Abstract:Many transport and rate processes in chemical, physical and biological systems, are controlled by the coupled chemical reaction-thermal diffusion process. Though many literatures, including the literatures of engineering of chemical reactions, discussed this coupled problem, but a unified rigorous theory and a unified method based on the chemical thermodynamics are lacked. In this paper we give a general thermodynamic theory including complete energy conservation equation, entropy equation, evolution equations of the heat conduction and the mass diffusion, especially the complete governing equations of these couple systems. The theory given here revises previous theories, clearly shows which factors should be considered and is valuable for the engineering of chemical reaction and other transport and rate processes.
5. Heat and Mass Transfer

Yu Zhiqing,Jin Yong

DOI: https://doi.org/10.1016/S0065-2377(08)60300-2

1994-01-01

Advances in Chemical Engineering

Abstract:null
Effect of Electric and Magnetic Field on Element Diffusion and Annealing Process in Metallic Material

ZHANG Kuai,LI Yungang,DING Ning

DOI: https://doi.org/10.3969/j.issn.1001-3814.2011.12.003

2011-01-01

Abstract:Based on the mechanism of electric and magnetic field in metallic material,the effects of electric and magnetic field on element diffusion and annealing process in metallic material were summarized.By proper energy effect,the electric and magnetic field is concerned with the physical metallurgy process,witch plays a crucial role in improving the properties of metallic material and development of new materials.
OVERVIEW OF STUDY ON EFFECTIVE DIFFUSIVITY OF COAL CHAR PARTICLE REACTION

Wang Yuan,Luo Yonghao,Ji Junjie,Lin Pengyun

DOI: https://doi.org/10.3969/j.issn.1004-4248.2010.03.021

2010-01-01

Abstract:An overview is presented on the experiment and modeling study of effective diffusivity through the ash layer,which is a key parameter when describing coal char particle combustion or gasification. There are two theories studying the effective diffusivity. Ash layer is a porous media,so the theory of diffusion through porous media can be adopted. On the other hand,coal char combustion or gasification is gas-solid reaction,so the gas-solid reaction theory can be used. Some suggestions on studying the effective diffusivity in the future are also given.
An Approach for Modelling Carbon Homogenization Processes of Steel in Micro-Scale

Weihua Wang,Changwen Ma,Shiwen Wang,Jian Cao,Jingqi Cai,Jianguo Lin

DOI: https://doi.org/10.1007/978-3-319-48764-9_380

2013-01-01

Abstract:A microscopic carbon diffusion simulation system has been developed to investigate homogenisation process during re-heating of slab inside furnaces. Models with initial grain divisions of specified percentage of pearlite and ferrite are generated by a Virtual Grain Generation Programme. The virtual grain models are imported into ABAQUS through Pathon script file for further mesh and model definitions. Effect of temperature on the diffusion process has been analyzed by use of the simulation system. Three different reheating temperatures as 1423K, 1473K and 1523K has been selected, and the carbon content of calculation is all selected as 0.14%.The computation result show that the homogenization time is 4007s as the diffusion temperature is 1423K, 2504s as temperature is 1473K and 1308s as temperature is 1523K. When the diffusion time is 40.5s, the difference of two temperature’s concentration difference arrive at maximum, the concentration difference of 1523K is larger 25.1ppm than that of 1423K.

Study for Diffusion Process in Chemical Heat Treatment

Mechanisms and Methods for Diffusion Process in Solid Metals

Thermally Induced Diffusion of Chemicals under Steady-State Heat Transfer in Saturated Porous Media

An Analytical Model for Diffusion of Chemicals under a Thermal Gradient in Finite Clayey Soil

General Rule and Promising Future of Mechanical Energy Aided Thermal Diffusing Process

Application of the Thermodynamic Extremal Principle to Diffusion-Controlled Phase Transformations in Fe-C-X Alloys: Modeling and Applications

Study on Influence of Air Distribution in Sintering Process on Sinter Quality

Heat-transfer simulation of slice potato during drying.

DETERMINATION AND ANALYSIS OF THE EFFECTIVE DIFFUSIVITY OF ADSORPTION REFRIGERATION WORKING PAIR

Analytical Model for Steady-State Solute Diffusion in Non-Isothermal Fractured Porous Media

The Research and Application of Computer Simulation on Heat Treatment in China

Coupling Effects of Chemical Stresses and External Mechanical Stresses on Diffusion

Study on Gas Diffusion Through Ash Layer During Coal Combustion Process and the Application

Study of a Generalized Thermoelastic Diffusion Bi-Layered Structures with Variable Thermal Conductivity and Mass Diffusivity

Influence of Diffusion on Thermogravimetric Analysis of Carbon Black Oxidation

Study on Diffusion Kinetics and Law of Chromium on the Surface of Low-Carbon Steel

A General Theory for Heterogeneous Coupled Chemical Reaction-Thermal Diffusion Systems

5. Heat and Mass Transfer

Effect of Electric and Magnetic Field on Element Diffusion and Annealing Process in Metallic Material

OVERVIEW OF STUDY ON EFFECTIVE DIFFUSIVITY OF COAL CHAR PARTICLE REACTION

An Approach for Modelling Carbon Homogenization Processes of Steel in Micro-Scale