Abstract:Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains, resulting in poor formability at room temperature. Therefore, the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets. The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al (wt.%) alloy during various annealed temperatures ranging from 300 °C to 450 °C, have been investigated using the quasi in-situ electron backscatter diffraction (EBSD) method. The as-rolled Mg-1Al alloy shows a dominant basal texture, which weakens and broadens in the rolling direction (RD) during the subsequent annealing, accompanied by the formation of 〈101¯0〉 texture component. Particularly, the 〈101¯0〉 texture component is more pronounced after annealing at high temperatures. The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands, which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45° from the normal direction (ND). Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process, resulting in a reduction in the texture intensity. Moreover, recrystallized grains belonging to the 〈101¯0〉 texture component grow preferentially compared to those with other orientations, which is attributed to low energy grain boundaries, especially grain boundaries with ∼30° misorientation angles. Furthermore, the high temperature annealing facilitates the rapid growth of grain boundaries having a 30° misorientation angle, leading to the occurrence of distinct 〈101¯0〉 texture after annealing at 450 °C for 1 h. The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.

Texture and Texture Randomization of Rolling Mg Alloy Sheet

Texture and Texture Optimization of Wrought Mg Alloy

Microstructure and Texture Evolution of AZ31 Magnesium Alloy During Rolling

Mechanical Properties and Texture Evolution During Rolling Process of an AZ31 Mg Alloy

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Formation of Unusual Rolling Texture in a Mg-Al-Mn Alloy Sheet by Large-Strain Hot-Rolling

Microstructure and texture of Mg alloy sheets fabricated by different rolling methods

Mechanical properties and texture evolution during hot rolling of AZ31 magnesium alloy

Texture Evolution of Extruded AZ31 Magnesium Alloy Sheets

Achieving High Ductility and Low In-Plane Anisotropy in Magnesium Alloy Through a Novel Texture Design Strategy

Unexpectedly Formed Strong Basal Texture in a Rolled Mg-Zn-Ca-Mn Alloy Sheet

Texture Evolution, Deformation Mechanism and Mechanical Properties of the Hot Rolled Mg-Gd-Y-Zn-Zr Alloy Containing LPSO Phase

Microstructure evolution and mechanical property of Mg-3Al alloys with addition of Ca and Gd during rolling and annealing process

Effect of Rolling Paths and Pass Reductions on the Microstructure and Texture Evolutions of AZ31 Sheet with an Initial Asymmetrical Texture Distribution

Achieving Texture Randomization and Yield Anisotropy Reduction in Rolled Mg-Zn-Y-Zr Alloy by Multidirectional Impact Forging

Effects of Texture on Anisotropy of Mechanical Properties in Annealed Mg–0.6%Zr–1.0%Cd Sheets by Unidirectional and Cross Rolling

Texture Evolution of AZ31 Magnesium Alloy Sheets During Warm Rolling

Texture Optimization on Mg Sheets by Preparing Soft Orientations of Extension Twinning for Rolling

Unexpected texture transition induced by grain growth during static annealing of a dilute Mg-1Al alloy

The Role of Al Content on Deformation Behavior and Related Texture Evolution During Hot Rolling of Mg-Al-Zn Alloys

The Effect of Texture on the Very High Cycle Fatigue Performance and Deformation Mechanism of Rolled AZ31B Magnesium Alloys