Abstract:In order to investigate the microstructure evolution, tensile deformation mechanism and strengthening mecha-nism of Ni36Co30Fe11Cr11Al8Nb4 high entropy alloy (HEA), the alloy samples were prepared by directional so-lidification at different solidification rates (5, 10, 20, 50 and 100 mu m/s). Results indicate that the microstructure of the directionally solidified Ni36Co30Fe11Cr11Al8Nb4 HEA is composed of primary bulky dendrites (FCC1 phase) and inter-dendritic lamellar structures which consist of the Laves phase and the Nb-enriched FCC2 phase. With the increase of solidification rate, the dendrites are refined, the volume fraction of inter-dendritic lamellar structure decreases, and Laves phase accumulates at the grain boundaries. Since FCC2 phase has lower nucleation barriers, the nucleation and growth of FCC2 phase are preferential to those of Laves phase in the inter-dendrite region. Tensile results indicate that the directionally solidified Ni36Co30Fe11Cr11Al8Nb4 HEA possesses the highest ultimate tensile strength and fracture strain at 5 mu m/s, which are 740.15 MPa and 35.23 %, respectively. The microscopic deformation behavior shows that FCC1 phase yields first, followed by FCC2 and Laves phases in sequence during tensile deformation. The moderately strong FCC2 phase coordinates the large inherent strength gap between FCC1 and Laves phases to avoid stress concentration and maintain ductility. FCC2- Laves interface plays a significant role in hindering dislocation movement and increasing the strength, the overall interfacial strengthening stress is estimated to be 9.1 GPa.

Microstructure Evolution and Compression Properties of a Directionally Solidified Ni-24.8%Nb Hypereutectic Alloy

Refining Micron-Sized Grains to Nanoscale in Ni-Co Based Superalloy by Quasistatical Compressive Deformation at High Temperature

Microstructure Evolution of Directionally Solidified Al-12%Ni Hypereutectic Alloy

Microstructures and Mechanical Properties of Directionally Solidified Ni-25%Si Full Lamellar in Situ Composites

Investigations on the Solidification Microstructures and Room Temperature Compression Properties of Nb-doped NiAl-32Cr-6Mo Hypereutectic Alloy

MICROSTRUCTURAL CHARACTERISTICS AND MECHANICAL PROPERTIES OF A Nb/Nb5Si3 BASED COMPOSITE WITH AND WITHOUT DIRECTIONAL SOLIDIFICATION

Compressive Properties and Microstructure Evolution in NiTiNb Alloy with Mesh Eutectic Phase

Microstructure evolution and mechanical properties of directionally solidified Ni36Co30Fe11Cr11Al8Nb4 high entropy alloy

Microstructure and Microtexture Evolution of Dynamic Recrystallization of a Ni-based Superalloy under High-Throughput Gradient Thermal Compression

Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites

Composite Growth in Highly Undercooled Ni70.2si29.8 Eutectic Alloy

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique

Effect of Growth Rate on Microstructure and Mechanical Properties in a Directionally Solidified Nb-silicide Base Alloy

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites

Microstructural Evolution with a Wide Range of Solidification Cooling Rates in a Ni-Based Superalloy

Microstructure control and ductility improvement of La?Al?(Cu,Ni) composites by Bridgman solidification

Microstructure Evolution and Elevated Temperature Compressive Properties of a Rapidly Solidified NiAl–Cr(Nb)/Dy Alloy

Characterization of the Microstructure Evolution and Microsegregation in A Ni-Based Superalloy under Super-High Thermal Gradient Directional Solidification

Microstructure Evolution and Compression Properties of a Directionally Solidified Ni-24.8%Nb Hypereutectic Alloy

Refining Micron-Sized Grains to Nanoscale in Ni-Co Based Superalloy by Quasistatical Compressive Deformation at High Temperature

Microstructure Evolution of Directionally Solidified Al-12%Ni Hypereutectic Alloy

Microstructures and Mechanical Properties of Directionally Solidified Ni-25%Si Full Lamellar in Situ Composites

Investigations on the Solidification Microstructures and Room Temperature Compression Properties of Nb-doped NiAl-32Cr-6Mo Hypereutectic Alloy

MICROSTRUCTURAL CHARACTERISTICS AND MECHANICAL PROPERTIES OF A Nb/Nb5Si3 BASED COMPOSITE WITH AND WITHOUT DIRECTIONAL SOLIDIFICATION

Compressive Properties and Microstructure Evolution in NiTiNb Alloy with Mesh Eutectic Phase

Microstructure evolution and mechanical properties of directionally solidified Ni36Co30Fe11Cr11Al8Nb4 high entropy alloy

Microstructure and Microtexture Evolution of Dynamic Recrystallization of a Ni-based Superalloy under High-Throughput Gradient Thermal Compression

Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification

Microstructure and Properties of Directionally Solidified NbSi&lt;sub&gt;2&lt;/sub&gt;/ Nb&lt;sub&gt;5&lt;/sub&gt;Si&lt;sub&gt;3&lt;/sub&gt; Composites

Composite Growth in Highly Undercooled Ni70.2si29.8 Eutectic Alloy

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique

Effect of Growth Rate on Microstructure and Mechanical Properties in a Directionally Solidified Nb-silicide Base Alloy

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites

Microstructural Evolution with a Wide Range of Solidification Cooling Rates in a Ni-Based Superalloy

Microstructure control and ductility improvement of La?Al?(Cu,Ni) composites by Bridgman solidification

Microstructure Evolution and Elevated Temperature Compressive Properties of a Rapidly Solidified NiAl–Cr(Nb)/Dy Alloy

Characterization of the Microstructure Evolution and Microsegregation in A Ni-Based Superalloy under Super-High Thermal Gradient Directional Solidification

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites