Abstract:This study deals with the Nb–niobium silicide-based composites developed by the hot-pressing of Nb–Si–Ti ternary powder mixtures with a fixed Ti addition (6at.%) and Si content ranging from hypereutectic (11at.%) to near-eutectic compositions (18at.%). The effects of Si content, Ti addition and strain rates on the sample microstructural characterization, flexural strength, fracture toughness, quasi-static compressive deformation and failure processes were investigated. It was revealed that the volume fraction of silicides increased with increasing Si content, and most of the Ti atoms dissolved into the niobium silicides to form (Nb,Ti)5Si3 solid solutions instead of binary titanium silicides. The experimental evidence showed that a moderate improvement in the flexural strength, fracture toughness and compressive yield stress of the composites was achieved by the addition of Ti. Higher Si additions produced a much more remarkable enhancement in the compressive yield stress and bulk hardness, whereas both the flexural strength and fracture toughness decreased with increasing Si content owing to the existence of residual porosities in the samples. The composites showed remarkable superiority to the arc-melted Nb–Si alloys and monolithic niobium silicides in fracture toughness (8.3–13.0MPam vs. 4.5MPam), where the toughening effect was attributed mainly to crack bridging and crack deflection by the remaining ductile Nb phase. Moreover, quasi-static uniaxial compression tests at strain rates between 10–5 and 10–3s−1 indicated that the deformation behavior and failure processes were significantly affected by Si content and strain rates. The strain-rate-hardening behavior for all the strain rates was observed in the composite materials and the strain-rate sensitivity decreased with increasing Si content. At a lower strain rate, the composite materials with a hypoeutectic Si composition failed with a pseudoplastic response and at an angle of ∼45° off the compressive loading direction. However, in the case of higher strain rate and Si content, the brittle failure in the samples occurred through vertical splitting and spalling of fragments.

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites

Effect of Mo Addition on Phase Stability and High-Temperature Strength of Nbsi2/Nb5si3 Composites

Microstructure and Mechanical Properties of Nb/Nb5Si3 in Situ Composites in Nb–Mo–Si and Nb–W–Si Systems

Effect of Mo Addition on Microstructure and Properties of Nb/Nb<sub>5</sub>Si<sub>3</sub> In-Situ Composite

Effect of Mo Addition on Microstructure and Properties of Nb/Nb<sub>5</sub>Si<sub>3</sub> In-Situ Composite

MICROSTRUCTURAL CHARACTERISTICS AND MECHANICAL PROPERTIES OF A Nb/Nb5Si3 BASED COMPOSITE WITH AND WITHOUT DIRECTIONAL SOLIDIFICATION

Microstructural and mechanical characterization of Nb-based in situ composites from Nb–Si–Ti ternary system

Mo effect on the phase stability and room-temperature fracture toughness of Nb/Nb5Si3 in-situ composites

Effects of Alloying on the Microstructures and Mechanical Property of Nb-Mo-Si Based in Situ Composites

The balance of mechanical and environmental properties of a multielement niobium-niobium silicide-basedIn Situ composite

Microstructure of the Nb-Si Based Multicomponent Alloy by Electromagnetic Cold Crucible Directional Solidifcation

Creep Mechanisms in High-Temperature In-Situ Composites

As-cast Structure and High-temperature Compressive Behavior of Arc Melting Nb-16 Si-2 Fe Alloy

Analyses of Eutectoid Phase Transformations in Nb–Silicide In Situ Composites

Study on the Fracture Toughness of Nb-10Si Alloys

Effects of the microstructure and minor elements on the fracture toughness of Nb-Si alloy

Microstructure and Mechanical Properties of Refractory High Entropy (mo0.5nbhf0.5zrti)bcc/m5si3 In-Situ Compound

Microstructural and mechanical evaluation of Nb-silicide-based in situ composite at ultrahigh temperature

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Nb-base Superalloys

Microstructure and Properties of Directionally Solidified NbSi&lt;sub&gt;2&lt;/sub&gt;/ Nb&lt;sub&gt;5&lt;/sub&gt;Si&lt;sub&gt;3&lt;/sub&gt; Composites

Microstructure and Properties of Directionally Solidified NbSi&lt;sub&gt;2&lt;/sub&gt;/ Nb&lt;sub&gt;5&lt;/sub&gt;Si&lt;sub&gt;3&lt;/sub&gt; Composites

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites

Effect of Mo Addition on Phase Stability and High-Temperature Strength of Nbsi2/Nb5si3 Composites

Microstructure and Mechanical Properties of Nb/Nb5Si3 in Situ Composites in Nb–Mo–Si and Nb–W–Si Systems

Effect of Mo Addition on Microstructure and Properties of Nb/Nb&lt;sub&gt;5&lt;/sub&gt;Si&lt;sub&gt;3&lt;/sub&gt; In-Situ Composite

Effect of Mo Addition on Microstructure and Properties of Nb/Nb<sub>5</sub>Si<sub>3</sub> In-Situ Composite

MICROSTRUCTURAL CHARACTERISTICS AND MECHANICAL PROPERTIES OF A Nb/Nb5Si3 BASED COMPOSITE WITH AND WITHOUT DIRECTIONAL SOLIDIFICATION

Microstructural and mechanical characterization of Nb-based in situ composites from Nb–Si–Ti ternary system

Mo effect on the phase stability and room-temperature fracture toughness of Nb/Nb5Si3 in-situ composites

Effects of Alloying on the Microstructures and Mechanical Property of Nb-Mo-Si Based in Situ Composites

The balance of mechanical and environmental properties of a multielement niobium-niobium silicide-basedIn Situ composite

Microstructure of the Nb-Si Based Multicomponent Alloy by Electromagnetic Cold Crucible Directional Solidifcation

Creep Mechanisms in High-Temperature In-Situ Composites

As-cast Structure and High-temperature Compressive Behavior of Arc Melting Nb-16 Si-2 Fe Alloy

Analyses of Eutectoid Phase Transformations in Nb–Silicide In Situ Composites

Study on the Fracture Toughness of Nb-10Si Alloys

Effects of the microstructure and minor elements on the fracture toughness of Nb-Si alloy

Microstructure and Mechanical Properties of Refractory High Entropy (mo0.5nbhf0.5zrti)bcc/m5si3 In-Situ Compound

Microstructural and mechanical evaluation of Nb-silicide-based in situ composite at ultrahigh temperature

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Nb-base Superalloys

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites

Microstructure and Properties of Directionally Solidified NbSi<sub>2</sub>/ Nb<sub>5</sub>Si<sub>3</sub> Composites

Effect of Mo Addition on Microstructure and Properties of Nb/Nb<sub>5</sub>Si<sub>3</sub> In-Situ Composite