Abstract:The increasing demand for high-performance lithium-ion batteries has propelled the exploration of advanced materials to overcome limitations associated with commercially available polyolefin-based separators. This study introduces a pioneering approach involving the synthesis of a crosslinked hydrogel nanofiber membrane (PDs) composed of polyvinyl alcohol (PVA) and N, N-dimethylacrylamide (DMAAm) through the combination of the photo-polymerization with electrospinning process. To address key drawbacks observed in existing separators—namely, low porosity, inadequate thermal stability, and insufficient electrolyte wettability—the porosity of the PDs hydrogel nanofibers was systematically controlled through both heating drying (PD12-HD) and freeze-drying (PD12-FD) methods. The separator's properties and performance were thoroughly examined, focusing on its chemical, mechanical, thermal, swelling, morphological, conductivity, and electrochemical properties. Comprehensive characterization of the PD12-FD separator revealed remarkable attributes surpassing those of a commercial counterpart (Celgard). The PD12-FD separator demonstrated exceptional mechanical strength (16.3 MPa), robust thermal stability (no shrinkage or deformation at 170 °C), high porosity (84.66 %), substantial electrolyte uptake capacity (672.86 %), superior ionic conductivity (3.405 mS/cm), and high lithium-ion transfer number (tLi + = 0.678). The improvement is attributed to the cross-linked structure formed between PVA and DMAAm. Importantly, coin cells assembled with the PD12-FD separator exhibited outstanding electrochemical performance. Even after 150 cycles at 1C, the PD12-FD separator maintained a capacity above 95 % (145.48 mAh/g), surpassing both PVA and Celgard separators. This study proposes a novel methodology for fabricating hydrogel nanofiber separators and introduces a customizable synthesis approach for producing separators with enhanced performance and controlled characteristics.

Preparation and Electrochemical Characterization of Gel Polymer Electrolyte Based on Electrospun Polyacrylonitrile Nonwoven Membranes for Lithium Batteries

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Nylon-Based Composite Gel Membrane Fabricated via Sequential Layer-By-Layer Electrospinning for Rechargeable Lithium Batteries with High Performance

Preparation and Electrochemical Properties of Electrospun Poly (vinylidene Fluoride) Membranes

Preparation and characterization of a semi-interpenetrating network gel polymer electrolyte

Preparation of Poly(acrylonitrile–butyl Acrylate) Gel Electrolyte for Lithium-Ion Batteries

Tailor-Made Electrospun Multilayer Composite Polymer Electrolytes for High-Performance Lithium Polymer Batteries

Cross-linked Electrospun Gel Polymer Electrolytes for Lithium-Ion Batteries

Preparation and Characterization of a Novel Gel Polymer Membrane Based on a Tetra-Copolymer

Preparation and performance of novel acrylonitrile (AN)-based copolymer gel electrolytes for lithium ion batteries

High ionic conductive PVDF-based fibrous electrolytes

In-situ Preparation of Gel Polymer Electrolyte with Glass Fiber Membrane for Lithium Batteries

Research on a Gel Polymer Electrolyte for Li-ion Batteries

Cross-linking copolymers of acrylates’ gel electrolytes with high conductivity for lithium-ion batteries

In-situ Crosslinked Gel Polymer Electrolytes Based on Ionic Monomers as Charge Carriers for Lithium-Ion Batteries

Gel Polymer Electrolytes Based on Silica-Added Poly(ethylene oxide) Electrospun Membranes for Lithium Batteries

Poly(Acrylonitrile-Methyl Methacrylate) Based Microporous Gel Electrolyte for Li-Ion Battery

A new strategy of PVDF based Li-salt polymer electrolyte through electrospinning for lithium battery application

Synthesis and Characterization of Gel Polymer Electrolyte Based on Epoxy Group via Cationic Ring-Open Polymerization for Lithium-Ion Battery

Electrospun of polyvinyl alcohol composite hydrogel nanofibers prepared by in-situ polymerization: A novel approach to fabricate hydrogel nanofiber membrane for lithium-ion batteries