Abstract:Olefinic alkylation of thiophenic sulfurs (OATS) technology can be handled under mild conditions without any hydrogen consumption, which is a promising way to produce clean gasoline. However, the side reaction in this desulfurization process would lead to significant levels of coke. To maintain the high activity for alkylation of sulfurs, the selectivity of OATS catalyst must be improved by reducing side reactions. In this paper, the catalytic mechanism of macroporous sulfonic resins Amberlyst 35 (A35) in the OATS process was further investigated by the calculation of density functional theory (DFT), to understand the reaction path of different reactant at molecular level. The calculated results indicated that the beginning of main and side reactions were both from a stable alkoxide intermediate, which was the protonation product of adsorbed olefin on the catalyst. Compared with alkenes, thiophenic compounds were more inclined to be coadsorbed on the alkoxide intermediate for further reaction, and the alkylation rate of sulfurs with alkenes was faster than the self-dimerization of alkenes. Moreover, the calculated results also indicated that the alkylation of thiophenic sulfurs as main reaction was exothermic while the dimerization of alkenes as side reaction was endothermic over A35. Additionally, the conversion curves of different reactants over A35 and the related kinetics at different temperature were also studied by experimental methods. The obtained experimental results could be used to verify the reliability of relevant theoretical calculations. Based on the differences in the reaction mechanisms obtained by the theoretical and experimental studies, two measures were proposed, which would be useful to reduce side reactions to a lower extent. The study would be beneficial to the further industrial application of A35 in the alkylation desulfurization of gasoline.

An Orthogonal Method for Aromatization Reactions of Shenghua Liquefied Petroleum Gas

Eight Lumps Kinetic Model for Residual Oil Catalytic Cracking

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Thermodynamic Analysis of Propane Aromatization

Study on in-situ catalytic conversion of alcohols to aromatics and its mechanism

Influence of temperature, residence time, and solvent/feedstock mass ratio on overall product distribution and oil products quality in ethanol liquefaction of 230 polypropylene impact copolymer

A Further Catalysis Mechanism Study on Amberlyst 35 Resins Application in Alkylation Desulfurization of Gasoline

Unraveling the Structure-Activity-Stability Relationship over Gallium-Promoted HZSM-5 Nanocrystalline Aggregates for Propane Aromatization

Non-Oxidative Aromatization of CH4-C3H8 over La-Promoted Zn/HZSM-5 Catalysts

Study on the FCC process of a novel riser-downer coupling reactor (III): Industrial trial and-CFD modeling

Simulations of Methane Partial Oxidation by CFD Coupled with Detailed Chemistry at Industrial Operating Conditions

Tandem Aromatization of Pentane with Temperature Shifting Three-Stage Fluidized Bed Reactor

Lumping Strategy in Kinetic Modeling of Vacuum Pyrolysis of Plant Oil Asphalt

Controllable alkylation of benzene with mixed olefins for producing C8-C15 aromatics in jet fuel

Molecular level analysis on performance of diameter expanding reactor to improve gasoline quality in FCC process

Enhanced Production of Aromatics from Propane with a Temperature-Shifting Two-Stage Fluidized Bed Reactor.

Kinetic Model of Olefins/Isobutane Alkylation Using Sulfuric Acid as Catalyst

Aromatics Production Via Catalytic Pyrolysis of Pyrolytic Lignins from Bio-Oil

Optimization of the Countercurrent Continuous Reforming Process Based on Equation-Oriented Modeling and the SQP Algorithm

Study on the Non-Oxidative Aromatization of Methane-Propane over Zn/HZSM-5 Catalysts Prepared by Different Methods

Selective Conversion of Syngas to Propane over ZnCrOx-SSZ-39 OX-ZEO Catalysts