Factors Influencing Membrane Fouling of Metal Membrane Bioreactor in Treating Domestic Sewage

XIE Yuan-hua,XU Cheng-hai,ZHU Tong
DOI: https://doi.org/10.13198/j.res.2009.04.95.xieyh.019
2009-01-01
Abstract:A submerged flat metal membrane bioreactor(MBR) was used to treat synthetic domestic sewage.The experiment was performed under two operational modes of aerobic and A/O processing.The influence on membrane filterability by mixed liquor suspended solid(MLSS) mass concentration and particle size distribution of sludge was investigated.Composition of membrane resistance under different operating models was also investigated.The results showed that an optimal MLSS mass concentration range existed for corresponding good membrane filterability in aerobic MBR.Cake resistance was found to be the main filtration resistance under aerobic processing.Cake fouling could be alleviated effectively by on-line chemical washing or mechanical cleaning.The system ran stably for 115 days at a permeate flux of 0.80-1.00 m3/(m2·d) without off-line cleaning.Internal resistance was found to be the main filtration resistance under A/O processing.The internal circulation of mixed liquor between anoxic and aeration tank caused the destruction of activated sludge flocs,and then led to large amounts of small particles,which absorbed in or blocked membrane pores and caused worse membrane filterability.Membrane flux was reduced from 1.00 m3/(m2·d) to 0.50 m3/(m2·d),and cleaning was performed 15 times during A/O processing in order to maintain system operation.
What problem does this paper attempt to address?