Abstract:An anoxic/oxic (A/O) treatment unit was upgraded using a submerged commercial ceramic flat-membrane bioreactor . The upgraded bioreactor effectively treated coal chemical wastewater. However, the factors influencing membrane fouling remain unclear. Thus, this study explored the mechanisms of membrane fouling of a commercial ceramic flat membrane bioreactor. With increasing duration of backwash, the rate of growth of transmembrane pressure (TMP) gradually increased. The proportions of concentration polarization resistance R p and cake layer resistance R f were 48.87% and 50.08%, respectively. Under the action of static electricity, negatively charged particles in the mixed liquid do not easily adhere to the membrane. Under conditions of high mixed liquid suspended solids (>12 000 mg/L), an increase in the suspended solid content in the mixture caused membrane fouling and pore blockage. When the flux exceeded 58 L·m −2 ·h −1 , the TMP increased sharply. When the aeration rate exceeded 200 mL/min, the impact of membrane erosion on fouling was no longer significant. The optimal suction/cessation ratio was 7:3. After cleaning with NaOH and NaClO, surface fouling of the membrane was significantly reduced.

Membrane fouling and influencing factors of a submerged commercial ceramic flat membrane bioreactor in treatment of coal chemical wastewater