Abstract:A new simple 3-node triangular flat-shell element with standard nodal DOF (6 DOF per node) is proposed for the linear and geometrically nonlinear analysis of very thin to thick plate and shell structures. The formulation of element GT9 (Long and Xu 1994), a generalized conforming membrane element with rigid rotational freedoms, is employed as the membrane component of the new shell element. Both one-point reduced integration scheme and a corresponding stabilization matrix are adopted for avoiding membrane locking and hourglass phenomenon. The bending component of the new element comes from a new generalized conforming Kirchhoff-Mindlin plate element TSL-T9, which is derived in this paper based on semiLoof constrains and rational shear interpolation. Thus the convergence can be guaranteed and no shear locking will happen. Furthermore, a simple hybrid procedure is suggested to improve the stress solutions, and the Updated Lagrangian formulae are also established for the geometrically nonlinear problems. Numerical results with solutions, which are solved by some other recent element models and the models in the commercial finite element software ABAQUS, are presented. They show that the proposed element, denoted as GMST18, exhibits excellent and better performance for the analysis of thin-think plates and shells in both linear and geometrically nonlinear problems.

A Mindlin Plate Triangular Element with Improved Interpolation Based on Timoshenko's Beam Theory

Mindlin triangular plate element with improved interpolation for the rotation and shear strain fields

A NEW TYPE OF PLATE BENDING ELEMENT

Timoshenko-Mindlin quadrilateral plate element with improved interpolation for the rotation and shear strain fields

TRIANGULAR THIN-PLATE ELEMENT BASED ON VECTOR FORM INTRINSIC FINITE ELEMENT

Analytical 3-D P-Element for Quadrilateral Plates - Part 1: Thick Isotropic Plate Structures

Development of triangular flat-shell element using a new thin-thick plate bending element based on semiLoof constrains

Three-node Mindlin plate finite element with shear stress resultants derived from equilibrium equations

A new twelve DOF quadrilateral element for analysis of thick and thin plates

A New Generalized Conforming Triangular Element for Thin Plates

Three-dimensional Elasticity Solutions for Bending of Generally Supported Thick Functionally Graded Plates

Application of the Quadrilateral Area Co‐ordinate Method: a New Element for Mindlin–Reissner Plate

An Efficient 3-Node Triangular Plate Element for Static and Dynamic Analyses of Microplates Based on Modified Couple Stress Theory with Micro-Inertia

A New Nine DOF Triangular Element for Analysis of Thick and Thin Plates

A New Triangular Hybrid Displacement Function Element for Static and Free Vibration Analyses of Mindlin-Reissner Plate

TWO GENERALIZED CONFORMING QUADRILATERAL THICK PLATE ELEMENTS BASED ON ANALYTICAL TRIAL FUNCTIONS

Generalized Conforming Thick Plate Element

A NEW C_1 CONFOMING QUADRILATERAL THIN PLATE BENDING ELEMENT

Generalized Conforming Plate-Bending Elements Using Point And Line Compatibility Conditions

Analytical Trial Function Method for Developing a Triangular Thick Plate Element Based on a Thin Plate Element

A New Triangular Displacement-Based Element for the Analysis of Laminated Composite Plates and Improvement Stress Solutions by a Hybrid Procedure