Abstract:A new simple 3-node triangular flat-shell element with standard nodal DOF (6 DOF per node) is proposed for the linear and geometrically nonlinear analysis of very thin to thick plate and shell structures. The formulation of element GT9 (Long and Xu 1994), a generalized conforming membrane element with rigid rotational freedoms, is employed as the membrane component of the new shell element. Both one-point reduced integration scheme and a corresponding stabilization matrix are adopted for avoiding membrane locking and hourglass phenomenon. The bending component of the new element comes from a new generalized conforming Kirchhoff-Mindlin plate element TSL-T9, which is derived in this paper based on semiLoof constrains and rational shear interpolation. Thus the convergence can be guaranteed and no shear locking will happen. Furthermore, a simple hybrid procedure is suggested to improve the stress solutions, and the Updated Lagrangian formulae are also established for the geometrically nonlinear problems. Numerical results with solutions, which are solved by some other recent element models and the models in the commercial finite element software ABAQUS, are presented. They show that the proposed element, denoted as GMST18, exhibits excellent and better performance for the analysis of thin-think plates and shells in both linear and geometrically nonlinear problems.

A New Generalized Conforming Triangular Element for Thin Plates

Generalized Conforming Element for Bending and Buckling Analysis of Plates

Generalized Conforming Plate-Bending Elements Using Point And Line Compatibility Conditions

Generalized conforming triangular membrane element with vertex rigid rotational freedoms

A NEW TYPE OF PLATE BENDING ELEMENT

Generalized Conforming Thin Plate Element Iii - Perimeter-Point and Least-Square Conforming Schemes

Development of triangular flat-shell element using a new thin-thick plate bending element based on semiLoof constrains

TWO GENERALIZED CONFORMING QUADRILATERAL THICK PLATE ELEMENTS BASED ON ANALYTICAL TRIAL FUNCTIONS

A Mindlin Plate Triangular Element with Improved Interpolation Based on Timoshenko's Beam Theory

Generalized Conforming Thin Plate Element Ii-Line-Point And Semiloof Conforming Schemes

Generalized Conforming Trefftz Element For Size-Dependent Analysis Of Thin Microplates Based On The Modified Couple Stress Theory

Generalized Conforming Thin Plate Element I-Introduction

A NEW C_1 CONFOMING QUADRILATERAL THIN PLATE BENDING ELEMENT

Development of a New Quadrilateral Thin Plate Element Using Area Coordinates

Generalized Conforming Thick Plate Element

Analytical 3-D P-Element for Quadrilateral Plates - Part 1: Thick Isotropic Plate Structures

A New Nine DOF Triangular Element for Analysis of Thick and Thin Plates

TRIANGULAR THIN-PLATE ELEMENT BASED ON VECTOR FORM INTRINSIC FINITE ELEMENT

THE GENERALIZED CONFORMING TRIANGULAR MEMBRANE ELEMENTS WITH ROTATIONAL DEGREE OF FREEDOM

A GENERALIZED CONFORMING PLANE ELEMENT BASED ON ANALYTICAL TRIAL FUNCTIONS

A Generalized Conforming Isoparametric Element