Abstract:Circulating Fluidised Beds (CFBs) are widely applied in the process industry, for mostly gas-solid and gas-catalytic reactions. T he riser is the key component of the CFB being the process reactor. The important design parameters are the operating gas vel ocity (U) and the solids concentration flux (G). The CFB operation starts at moderate to high superficial gas velocities. Its vo idage exceeds ~ 0.9 and is a function of the solids circulation flux. Differen t flow modes have been presented in literature, and result in an operation diagram where G and U delineate specific operations, from dilute riser flow, through core-annulus flow, to de nse riser upflow (mostly at any U, G exceeding 80 to 120 kg m -2 s -1 ). Increasing G whilst maintaining the gas velocity will cau se an increase in suspension concentration. The riser flow can hence be characterized by its apparent voidage, e. In the coreannulus operation, clusters of particles reflux near the wall, thus influencing the local radial voidage in the cross section of the riser, and also extending over a given distance, δ, from the wall to the core . Through measurements in CFBs of 0.1 and 0.14 m I.D., the research has been able to d etermine the average axial and radial voidages of the dense phase within the different regimes, whilst also determining the thickness of the annulus (in CAF-mode). Exp erimental results will be illustrated and compared with previous empirical equations, shown to have a limited accuracy only both for e, and for the thickness of the annulus in CAF operation. Within the operating conditions tested, results demonstrate that t he annulus thickness is about 15 to 20% of the riser diameter in CAF, and that the voidage in the riser is a function of U and G, w ith riser diameter and distance along the riser length as secondary parameters.

Modeling of the Transient Particle Velocity Distribution in the Fluidized Bed Combustor (FBC) Riser

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Regression Analysis on Vertical Components of the Transient Solid Particle Velocity in a Fluidized Bed Combustor (FBC)

Particle Decelerating Regions in Turbulent Fluidized Bed

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

Factorial Modeling for Transient Solid Particle Velocity in a Fluidized Bed Combustor Cold Model

The Unique Phase Doppler Particle Analyzer Application and Analysis of Solid Particle Flow in the Fluidized Bed Combustor (FBC) Cold Model

Particle Velocity Distribution and Its Prediction in a 14 M Two-Dimensional Circulating Fluidized Bed Riser

PIV measurement of the gas-solid flow pattern in a CFB riser

Profiles of particle velocity and solids fraction in a high-density riser

Axial Velocity Distribution Of Particle Along The Radial Direction In Dilute Phase Of Riser

Experimental Research On Particle Rotation Characteristics In Cfb Riser

Modeling of the Minimum Fluidization Velocity and the Incipient Fluidization Pressure Drop in a Conical Fluidized Bed with Negative Pressure

Hydrodynamic Model with Binary Particle Diameters to Predict Axial Voidage Profile in a CFB Combustor

Effect of Riser Geometry Structure on Local Flow Pattern in a Rectangular Circulating Fluidized Bed

The 7th World Congress on Particle Technology (WCPT7) the Voidage in a CFB Riser As Function of Solids Flux and Gas Velocity

Visualization Study On The Interface Of Core-Annulus Flow In A Circulating Fluidized Bed Riser By Piv

Visual Measurement of Particle Movement in Rectangular Circulating Fluidized Bed

Two-dimensional coal combustion modeling of CFB

Ldv Measurements of Particle Velocity Distribution and Annular Film Thickness in A Turbulent Fluidized Bed

Numerical Simulation of Particulate Flows in CFB Riser with Drag Corrections Based on Particle Distribution Characterization